螺栓松动边界下纤维增强复合薄板的振动测试方法

提出了基于预埋压力传感器的量化测试方法,研究了螺栓松动边界对纤维增强复合薄板振动特性的影响。首先,自主设计并开发了带有预埋压力传感器的螺栓松动边界下复合薄板的振动测试系统,并详细介绍了系统各个部件的组成和功能;然后,归纳出一套合理、规范的松动边界下复合薄板的振动测试流程,并对HF10碳纤维/树脂复合薄板进行了实际测试。结果表明:随着螺栓松动程度的不断增加,复合薄板的固有频率逐渐降低,模态振型的节线位置也发生了不同程度的变化,但其阻尼结果呈现先增大后减小的趋势;而共振和非共振响应呈现先减小后增大的趋势。     

金属有机框架(MOFs)材料在锂离子电池及锂金属电池电解液中的应用

总结了金属有机框架(MOFs)材料在锂离子电池电解液中的研究进展.通过归纳锂离子电池长期存在的一些缺陷,随后将MOFs材料作为离子筛、人造负极保护层、准固态电解质以及用来调节电解液构型,使得锂离子电池的性能得到显著提升.最后,基于MOFs材料本身的特性,还对MOFs材料在电化学储能领域中的后续应用进行了合理地前瞻性展望...     

液相色谱-串联质谱法分析樟柳碱大鼠肝匀浆代谢产物

运用液相色谱-电喷雾离子阱串联质谱(LC-MSn)联用技术研究了樟柳碱大鼠肝匀浆中的代谢物。采用离体实验的代谢研究方法,将樟柳碱与大鼠肝匀浆在富氧条件下温孵,代谢物以乙酸乙酯萃取,以ReliA-sil C18(5μm,2 mm×150 mm)为分离柱,甲醇/0.01%三乙胺溶液(用甲酸调节pH 3.5)(60∶40,V/V)为流动相,采用LC-MS及LC-MSn等方法进行分析。和原药相比较,根据温孵液中分析物分子量的变化(ΔM)及其多级质谱数据,在樟柳碱的大鼠肝匀浆培养液中鉴定出了2种代谢物,即脱水去甲基樟柳碱和N-氧化樟柳碱。实验结果表明,该液相色谱-串联质谱方法适合于药物代谢物的快速分析。     

低压供热涂层材料制备及热性能研究

低压供热技术具有安全系数高和节能降耗等优势,因而成为石化稠油长输管线、风力发电叶片冬季防覆冰和室内供暖等领域的研究热点之一。本文制备了一系列低压供热涂层材料,研究不同碳功能填料对涂层发热速率、发热功率及最高发热温度的影响规律,并揭示石墨烯和碳纤维对提升涂层材料热性能的协同作用。其中石墨烯纳米片的还原程度对材料热性能具有重要影响,降低其表面官能团密度对提升涂层供热特性具有促进作用,但是官能团密度过低会导致石墨烯纳米片的团聚现象,引起涂层发热不均匀。加入适量碳纤维可以提高石墨烯的均匀分散性,提升发热速率。优化石墨烯纳米片和碳纤维的比例后,采用24V电压驱动时,涂层材料的发热速率达到7.1℃·s^-1,功率密度为800W·m^-2,最高发热温度为124℃。     

Highly efficient perovskite solar cells by tuning electronic structures of thienothiophene-based as hole transport materials

The atomic substitutions were used to study the hole transport materials (HTM) properties of six thiophenothiophene molecules (HTM1-HTM6) to reveal the relationship between their core structures and photoelectric properties. To better investigate the difference between experimentally original and designed molecules, we calculated the hole mobility and some parameters (such as energy levels, stability, and optical properties, etc). The results showed that the molecular orbital levels of the original and designed molecules have well matched with perovskite and Ag electrode to ensure hole transport and inhibit the electron reflux. Among the designed HTMs, HTM5 has the smallest energy gap that results in the red-shifted absorption spectra. Furthermore, there is an obviously increased charge transfer integral V due to the introduction of the Si atom, which greatly improved the hole mobility. Therefore, atom substitution by introducing Si atoms (HTM5) will improve the energy levels and charge transport ability, and molecular design by means of atom substitution can be a potential way to tunable HTM performance in solar cells.     

First-principles prediction of crystal structure and physical properties of ScB3

The crystal structure of ScB₃ is seeked by combining the developed particle swarm optimisation algorithm for crystal structure prediction with first-principles calculations. A new monoclinic phase with the C2/m symmetry is predicted successfully, which is energetically more superior to the early reported R-3m-, P2₁/m-, P6₃/mmc-, P-6m2-, Pnma-, and Pm-3m-type structures in the pressure range from 0 to 100?GPa. The obtained elastic constants and phonon dispersion curve reveal that the C2/m-ScB₃ is mechanically and dynamically stable. The predicted large bulk module, high shear modulus, small Poisson’s ratio as well as the considerable hardness indicate that the C2/m-ScB₃ has outstanding mechanical property. Meanwhile, the dependences of the bulk modulus and Young’s modulus of ScB₃ on the crystal orientation are investigated theoretically. Through applying the strain–stress method, the ideal tensile and shear strengths along different crystal directions are also estimated, and the obtained results confirm that the shear mode dominates the failure mode in the C2/m-ScB₃ structure and it is intrinsically a hard material. The electronic structure calculation and chemical bonding analysis illustrate that the strong covalent B-B and Sc-B bonds are responsible for its structural stability and high hardness.     

Complementarity between micro-micro and micro-macro entanglement in a Bose–Einstein condensate with two Rydberg impurities

We theoretically study complementarity between micro-micro and micro-macro entanglement in a Bose–Einstein condensate with two Rydberg impurities. We investigate quantum dynamics of micro-micro and micro-macro entanglement in the micro-macro system. It is found that strong micro-macro entanglement between Rydberg impurities and the BEC can be generated by the use of initial micro-micro entanglement between two Rydberg impurities, which acts as the seed entanglement to create micro-macro entanglement. We demonstrate a curious complementarity relation between micro-micro and micro-macro entanglement, and find that the complementarity property can be sustained to some extent even though in the presence of the BEC decoherence.     

改变激发环境调控Ho3+离子的上转换发光特性

稀土掺杂上转换发光材料的发光特性不仅依赖于基质材料本身,而且与其激发条件密切相关.本文主要是以Ho^3+离子为研究对象,在NaYF4和LiYF4这两种不同的基质中,研究其在不同激发条件下的上转换发光特性.通过共聚焦显微光谱测试系统,对比Ho^3+离子在NaYF4和LiYF4微米晶体中的发光特性.实验结果发现:Ho^3+离子在这两种不同基质中均展现出较强的荧光发射.然而,当激发功率增加时,在单颗粒个LiYF4微米晶体中,当激发功率增加时,Ho^3+离子则发射出较强绿光及微弱的红光,红绿比变化并不明显,其蓝光发射强度也相对较弱.当激发这两种微米粉末晶体时,结果发现:Ho^3+离子均发射较强的绿光发射并伴有微弱红光发射,两种晶体中的发射特性极其相似.由此可见,在常规测试条件下,一些特殊发光现象是很难被观测到的.同时,通过对其光谱特性的分析,对Ho^3+离子的发光机理进行了研究.     

医用物理学课程翻转课堂的教学改革与实践

在2018级临床医学专业医用物理学课程中进行翻转课堂试点教学,对学生考试成绩进行了统计与分析,在学时减半的情况下,进行翻转课堂教学班级的平均分略高于传统教学班级的平均分.翻转课堂为先进的教学方法,主要培养学生自主学习能力,调动学生学习的积极性,可以大范围推广使用.     

Preparation of Highly Stable and Photoluminescent Cadmium-Free InP/GaP/ZnS Core/Shell Quantum Dots and Application to Quantitative Immunoassay

Indium phosphide (InP) quantum dots (QDs) are ideal substitutes for widely used cadmium-based QDs and have great application prospects in biological fields due to their environmentally benign properties and human safety. However, the synthesis of InP core/shell QDs with biocompatibility, high quantum yield (QY), uniform particle size, and high stability is still a challenging subject. Herein, high quality (QY up to 72%) thick shell InP/GaP/ZnS core/shell QDs (12.8 ± 1.4 nm) are synthesized using multiple injections of shell precursor and extension of shell growth time, with GaP serving as the intermediate layer and 1-octanethiol acting as the new S source. The thick shell InP/GaP/ZnS core/shell QDs still keep high QY and photostability after transfer into water. InP/GaP/ZnS core/shell QDs as fluorescence labels to establish QD-based fluorescence-linked immunosorbent assay (QD-FLISA) for quantitative detection of C-reactive protein (CRP), and a calibration curve is established between fluorescence intensity and CRP concentrations (range: 1–800 ng mL⁻¹, correlation coefficient: R² = 0.9992). The limit of detection is 2.9 ng mL⁻¹, which increases twofold compared to previously reported cadmium-free QD-based immunoassays. Thus, InP/GaP/ZnS core/shell QDs as a great promise fluorescence labeling material, provide a new route for cadmium-free sensitive and specific immunoassays in biomedical fields.