强外加电场与大调制度下光折变动力学光栅形成研究

强外加电场与大调制度在光折变效应的研究中已经得到了广泛应用。采用PDECOL算法,严格求解光折变带输运方程,得到外加电场时不同调制度下光折变晶体中随时间变化的空间电荷场、载流子浓度,并讨论了外加电场对它们的影响。通过将物质方程与耦合波方程联立数值求解,可得到光折变光栅形成过程中两波耦合增益系数以及光束条纹相位的变化。模拟结果表明,在强外加电场作用下,两束记录光之间的光强与相位耦合都得到了增强,而原有的解析式忽视了强外加电场与大调制度对空间电荷场相位耦合的影响,此时不再适用。同时发现折射率光栅与记录光束条纹均发生弯曲,并不再保持平行。     

Quantum search via superconducting quantum interference devices in a cavity

We propose a scheme for implementing the Grover search algorithm with two superconducting quantum interference devices (SQUIDs) in a cavity. Our scheme only requires single resonant interaction of the SQUID-cavity system and the required interaction time is very short. The simplicity of the process and the reduction of the interaction time are important for restraining decoherence.     

Generation of femtosecond pulses at 1350 nm by Cerenkov radiation in higher-order-mode fiber

We demonstrate a method of generating short pulses at 1350 nm by exciting Cerenkov radiation in a higher-order-mode fiber with a 1064 nm femtosecond fiber laser. We measure a 106 fs, 0.66 nJ output pulse. Cerenkov radiation in fibers allows for energy transfer between a soliton and a dispersive wave, providing an effective and engineerable platform to shift the wavelength of a femtosecond source. With appropriate design of the higher-order-mode fiber, this method of generating short pulses at 1350 nm can be extended to other wavelengths and to higher pulse energies.     

First-principles study of fundamental properties and electronic structure of alloys

We have performed first-principles calculations using full-potential augmented-plane-wave method to investigate the fundamental properties of the Cd_1–xZn_xTe alloys. The composition dependence of the lattice constant and the bulk modulus have been estimated from total energy calculations. By means of the analytical fitting the band structures in the vicinity of the Brillouin center a complete set of effective electron- and hole-masses have also been derived. In order to further understand the effects of the chemical bonding on the above macroscopic properties we then studied the relaxation behaviors and the changes of the electronic states upon alloying for x=0.25 system. The results presented here yield a general understanding of the fundamental properties for the Cd_1–xZn_xTe crystals studies.     

Synthesis of hexagonal monocrystal AlN microtubes and nanowires at low temperature

This paper reports that pure hexagonal aluminium nitride microtubes and nanowires growing along the [0001] direction have been successfully synthesized by directly reacting AlClh-AlN, microtubes, nanowires,h-AlN, microtubes, nanowiresProject supported by the National Natural Science Foundation of China (Grant No 10474078) and the Science Foundation of the Education Office of Shanxi Province, China.2006-11-23This paper reports that pure hexagonal aluminium nitride microtubes and nanowires growing along the [0001] direction have been successfully synthesized by directly reacting AlCl3 with NaN3 at low temperature （450℃） under condition of non-solvent system. The grey-white powder of reacting product was characterized by high-resolution transmission electron microscope （HRTEM）, which shows that the powder is long straight-wire morphology with outer diameter from 40nm to 300 nm and length up to several micrometres. The results of both electron diffraction （ED） and x-ray diffraction （XRD） indicate that the AlN microtubes have a pure hexagonal monocrystal tubular structure with the combination of the curled AlN nanobelts. Room-temperature photoluminescence spectrum of the synthesized sample showed an emission peak, which is closely related to the small size of the microtubes.     

End-pumped Nd:YAG zigzag slab laser with weak pump absorption

A diode-pumped Nd：YAG oscillator laser with an end-pumped zigzag slab architecture and weak pump absorption is developed. An output power of 253 W with a slope efficiency of 50.2% and an optical-optical conversion efficiency of 39.6% is achieved from the resonator, which emits the maximum power of 290 W with 840-W pump power. An optimum laser diode （LD） array coolant temperature is chosen in an attempt to realize the weak but uniform pump absorption. of zigzag slab resonator depends sensitively on the Furthermore, we have confirmed that the performance incident angle of the beam at the slab end face.     

PACIAE model capability in describing net proton moments

PACIAE 2.0, a parton and hadron cascade model, is employed to investigate the dependence of the moments of net proton event distributions on reaction energies varying from RHIC to LHC energy in p + p collisions. It is found that net proton moments and moment products are sensitive to the collision energy except the moment product k?? ² which is almost independent of the collision energy. The PACIAE results are in line with experimental data.     

古生物群遗迹化石的三维数字化测量

对古生物化石进行数字化建档,为古生物化石的长久保存、研究和复原提供了一个切实可行的办法。阐述了非接触式激光扫描仪的测量原理,并利用其对罗平古生物化石群中分布在120m2范围内的古生物足迹化石进行了数字化测量,采用大视场WIDE和小视场TELE镜头交替使用的方法获取全场和单一足迹化石三维点云数据,再利用三维数据处理PolyWorks软件将两个镜头的三维数据进行对应的嵌入融合,最终测量结果既能全面记录足迹整体分布,真实反映古生物爬行运动轨迹,又能精细反映足迹局部特征。结果表明提出的对大面积野外待测对象的测量方法,为化石野外测量、三维数字化、数字存储提供了可行方案。     

聚龙一号装置上首次铝套筒Z箍缩X射线背光照相实验

在聚龙一号脉冲功率装置上首次完成了对带正弦扰动铝套筒Z箍缩的X射线背光照相实验。实验采用千焦耳激光器（1053 nm, 1 kJ, 1 ns）驱动固体靶材产生X射线, 然后利用基于球面晶体的单色背光照相技术以及直接点投影背光照相技术, 成功观测到约7.5 MA电流驱动条件下, Z箍缩铝套筒的外边界不稳定性发展情况。该实验验证了在聚龙一号装置上联合千焦耳激光器开展X射线背光照相实验的能力, 为后续精密Z箍缩物理研究奠定了基础。     

光学元件亚表层裂纹成核临界条件研究

基于压痕实验和连续刚度测量法得到了熔石英材料硬度和弹性模量随压入深度的变化曲线, 系统分析了材料由延性到脆性转变的过程, 确定了熔石英晶体在静态/准静态印压和动态刻划时产生裂纹的临界载荷和临界深度。渐变载荷刻划实验结果表明, 划痕过程诱发的裂纹对法向载荷有很强的依赖性, 载荷较小时材料去除方式为延性域去除。随着法向载荷的增加, 首先产生垂直于试件表面的中位裂纹和平行于试件表面方向扩展的侧向裂纹, 而在试件表面上并没有产生明显的特征。载荷进一步增加后, 侧向裂纹扩展并形成了明亮区域, 最终诱发了沿垂直于或近似垂直于压头运动方向扩展的径向裂纹, 实现了材料的脆性去除。