Analysis and optimisation of grooved parallel slider bearings with cavitation

Meccanica - This paper introduces an analytical approach to optimize the textured bearing with cavitation to improve the load support. For this purpose, a grooved parallel slider bearing is...     

Theory and model implementation for analyzing line structures subject to dynamic motions of large deformation and elongation using the absolute nodal coordinate formulation (ANCF) approach

This paper presents the theory development and numerical implementation of a new gradient-deficient-based ANCF (Absolute Nodal Coordinate Formulation) model applied to perform the nonlinear dynamic analysis of elastic line structures subject to large stretching and deformation. The derivations of model equations, introduced numerical approaches, and result validations are the focuses of this study. Different from the traditional rod theory for small stretching consideration, the present model implements the line structures’ large elongation concepts into both the control mechanisms of constitutive formulations and equations of motion. The effect of external hydrodynamic forces on structures is also included in the model formulations. Based on the conservation of energy, the line model developed in this study covers the variation in strain and takes a full account of the bending effect with large stretching. A finite-element-based implicit scheme according to a modified Newmark-beta method is employed to solve the assembled system equations with unknown variables of nodal position vectors, their tangential derivatives, and strains. Selected cases with dynamic motions, such as nonlinear oscillation of a compound pendulum, free falling of a horizontal elastic beam in air with two different settings of gravity, free falling of a submerged horizontal tether with and without an attached concentrated mass, and a submerged vertical tether with a prescribed translational motion, are simulated to verify the developed model by comparing the results with analytical solutions and published experimental data and numerical results. It is found the present ANCF model, as noticed with good matched results with analytical solutions, measurements and other published solutions, is demonstrated to be able to provide converged and reasonably accurate predictions on the responses of line structures subject to large dynamic motions.

     

螺栓松动边界下纤维增强复合薄板的振动测试方法

提出了基于预埋压力传感器的量化测试方法,研究了螺栓松动边界对纤维增强复合薄板振动特性的影响。首先,自主设计并开发了带有预埋压力传感器的螺栓松动边界下复合薄板的振动测试系统,并详细介绍了系统各个部件的组成和功能;然后,归纳出一套合理、规范的松动边界下复合薄板的振动测试流程,并对HF10碳纤维/树脂复合薄板进行了实际测试。结果表明:随着螺栓松动程度的不断增加,复合薄板的固有频率逐渐降低,模态振型的节线位置也发生了不同程度的变化,但其阻尼结果呈现先增大后减小的趋势;而共振和非共振响应呈现先减小后增大的趋势。     

紫外分光光度法测定含吡啶盐型共聚物的阳离子度

报道了用紫外分光光度法在268nm处定量测定含吡啶环的高分子共聚物中吡啶环的含量,据此计算出该共聚物的阳离子度。实验结果表明:共聚物的阳离子度随着疏水碳链的增长而逐渐减小;同时与高聚物的阳离子度测定的经典方法———AgNO3法进行了比较,结果表明:对于含有吡啶环的高聚物的阳离子度测定,对于含有共轭体系的高聚物的分析如阳离子度的测定和对具有特征紫外吸收体系的含量测定等,紫外分光光度法是一种简便、快速、准确而有效的实验方法。     

金属有机框架(MOFs)材料在锂离子电池及锂金属电池电解液中的应用

总结了金属有机框架(MOFs)材料在锂离子电池电解液中的研究进展.通过归纳锂离子电池长期存在的一些缺陷,随后将MOFs材料作为离子筛、人造负极保护层、准固态电解质以及用来调节电解液构型,使得锂离子电池的性能得到显著提升.最后,基于MOFs材料本身的特性,还对MOFs材料在电化学储能领域中的后续应用进行了合理地前瞻性展望...     

有限图上高阶Yamabe型方程的非平凡解

该文研究了以下高阶Yamabe型方程Lm,pu - g|u|p-2 u = λ f|u|α-2 u在有限图上的非平凡正解的存在性,其中Lm,p是一个2m阶差分算子,它是一种p次(-Δ)m算子更一般化,α≥p≥2,g＞0和f ＞0是定义在G的所有顶点上的实函数,m≥1是一个整数.     

Multi-scale finite element simulation on large deformation behavior of wood under axial and transverse compression conditions

Acta Mechanica Sinica - Multi-scale finite element method is adopted to simulate wood compression behavior under axial and transverse loading. Representative volume elements (RVE) of wood...     

氦在铝表面辐照和积聚的团簇动力学模拟

我们利用团簇动力学模型(IRadMat)研究了keV-He离子辐照金属铝的缺陷动力学和氦的聚集行为.通过对不同俘获类型(团簇、晶界和位错)俘获He浓度的定量分析,我们发现大多数He原子被晶界吸收,这成为铝在低辐照通量下发生脆化的主要原因.随着辐照能量的增加,He滞留峰的位置会变得更深.然而,随着辐照通量的增加,He在体内的滞留量会变得更多,但滞留深度的峰值位置不变.我们的结果表明,晶界的影响在He的滞留分布以及铝的脆化行为中起着关键作用,这也有助于我们理解He在金属中的动力学行为和损伤的分布.     

载机平台光电转塔目标定位的仿真算法

目标定位是光电转塔典型功能和任务之一,对其定位精度的考量也是转塔作战技术指标之一,针对该问题,从理论和仿真角度进行了分析。分析目标定位中用到的坐标系及其相互转换关系,给出光电转塔视轴反演、有源目标定位、无源目标定位的算法流程,通过仿真实验加以验证,考虑了定位过程中可能的随机误差来源,并分析是否采用均值滤波及其对定位结果的影响,最后通过Monte-Carlo分析计算了定位精度。分析结果表明:1）有源定位比无源定位的精度高,在仿真假设条件下,精度约提高1倍;2）均值滤波后,定位精度有较大提升（约提高15倍）;3）18 km距离时典型无源定位精度在80%置信度条件下约为39.4 m;4）统计直方图反映出80%置信度CEP半径及最大误差距离随载机位置、姿态、转塔视轴等（体现在目标载机距离上）不同参数的变化结果。     

基于粒子滤波的运动目标光电定位仿真研究

运动目标的光电定位不能像静止目标那样简单做均值滤波,鉴于此,引入粒子滤波算法,它不仅可以应用于线性系统,而且还适用于非线性系统。结合光电定位需求,详细推导了计算公式及初值和参数选取公式,对只含测量噪声以及含有测量和运动噪声等的海面运动目标光电无源定位算法进行了仿真计算,验证了算法的有效性,讨论了噪声强度对滤波效果的影响,滤波参数选择对滤波效果的影响,目标运动方式对滤波跟随性的影响,重采样算法对滤波效果的影响等。所得结论为:粒子滤波可用于运动目标光电定位过程,可有效降低定位误差;粒子滤波算法具有较强鲁棒性,适用于噪声较大、目标运动形态变化大等情况。