Application of cold neutron prompt-gamma activation analysis in environmental studies of aquatic plants

This paper describes the use of cold-neutron prompt-gamma activation analysis (CNPGAA) to determine carbon, nitrogen, and phosphorus in the aquatic plant Typha domingensis, commonly known as cattail, during spring and fall seasons. According to studies of the Florida Everglades, cattail replaces sawgrass as a result of nutrient enrichment from farm water runoff. Nutrient enrichment, especially phosphorus, in sediment and the water column can lead to undesirable expansion. Early signs of this expansion are apparent in the Apalachicola River floodplain near Apalachicola, Florida, USA. This research project is designed to use cattails as biomonitors of nutrient enrichment in the lower Apalachicola River floodplain. Determination of carbon, nitrogen, and phosphorus in cattail using cold neutron prompt-gamma activation has been developed in our previous studies at the CNPGAA facility at the National Institute of Standards and Technology (NIST), USA. The results of numerous field samples, collected from the study area during spring and fall seasons in 2002, will be presented in this paper.     

呋喃西林水溶液在光和热作用下的稳定性

The influence of both light and heat on the stability of nitrofurazone aqueous solution was studied. Results show that in either heating experiments or the exposure to light at high temperatures, the degradation rate obeyed zero-order kinetics. The total rate constant ktotal caused by both light and heat can be divided into two parts: ktotal =kdark klight, where kdark and klight are the degradation rate constants caused by heat and light, respectively. The klight can be expressed as klight=Alight*exp(-Ea,light/RT)*E, where E is the illuminance of light, and Alight and Ea,light both are experimental constants. The values of these kinetic parameters were determined based on the experiments in the dark and upon exposure to three different light sources. Results show that the values of Alight and Ea, light varied with the light source. To save time, labor, and drugs, exponential heating experiments were employed and compared with the isothermal experiments. Results indicated that kinetic parameters obtained by exponential heating experiments are comparable to those obtained by isothermal experiments either in the dark or upon exposure to light.     

Assay of free ferulic acid and total ferulic acid for quality assessment of Angelica sinensis

Activity of Chinese Danggui (DG), the processed root of Angelica sinensis (Oliv.) Diels, is linked to the ferulic acid content but the stability of ferulic acid during extraction for medicinal use is not known. The stabilities of ferulic acid and coniferyl ferulate were evaluated in the extracts of DG using a variety of extraction solvents. These included various combinations and proportions of methanol, water, formic acid, 1 M aqueous hydrochloric acid and 2% sodium hydrogen carbonate (NaHCO3) in water. Coniferyl ferulate was found liable to hydrolyze into ferulic acid in neutral, strongly acidic and basic solvents, where heat and water could facilitate this hydrolysis. However, the hydrolysis was relatively resisted in weakly organic acid. Based on the stability evaluation, two new terms, namely: free ferulic acid and total ferulic acid, were suggested and defined. Free ferulic acid refers to the natural content of ferulic acid in herbs. Total ferulic acid means the sum of free ferulic acid plus the amount of related hydrolyzed components. Meanwhile, the high-performance liquid chromatographic (HPLC) method was developed to assay free ferulic acid and total ferulic acid in DG using methanol-formic acid (95:5) and methanol-2% NaHCO3 in water (95:5) as extraction solvents, respectively. Ten DG samples were investigated on their contents of free and total ferulic acid. The results indicated that the amount variety of free ferulic acid was larger than that of their counterparts, and the ratio of total ferulic acid to free ferulic acid was 4.07 +/- 2.73 (mean +/- SD, n = 10). The chemical assay of DG using total ferulic acid content would be a better choice to assess the herbal quality and was recommended.     

[{Cu(phen)2}(μ‐malato){Cu(phen)(NO3)}](NO3)·4H2O: malate acting as a tetra­dentate and dibridging ligand in a dinuclear copper complex

The crystal structure of the title compound, μ‐2‐hydroxy­butane­dioato‐1κ²O⁴,O^4′:2κ³O¹,O²,O⁴‐nitrato‐2κO‐tris­(1,10‐phen­anthroline)‐1κ⁴N,N′;2κ²N,N′‐dicopper(II) nitrate tetra­hydrate, [Cu₂(C₄H₃O₅)(NO₃)(C₁₂H₈N₂)₃](NO₃)·4H₂O, contains an unsymmetrical dinuclear copper complex with Cu(phen)₂ and Cu(phen)(NO₃) moieties (phen is 1,10‐phenanthroline) bridged by a malate (2‐hydroxy­butane­dioate) ligand, which acts as a double‐bridging and tetra­dentate ligand. As a result of this double‐bridging action, especially the direct coordination of the O atom of one carboxyl­ate group of malate to the two Cu atoms, the Cu⋯Cu distance is only 4.199 (1) Å and the two phen planes are roughly parallel [the shortest inter­planar distance is 3.28 (1) Å], exhibiting an obvious intra­molecular π–π stacking inter­action.     

Pervaporation separation of alkane/thiophene mixtures with PDMS membrane

Worldwide concerns over environment have stimulated increasing interest both in academic and industry for deep desulfurization of gasoline. Polydimethylsiloxane (PDMS) composite membrane was used to separate the binary and multicomponent alkane/thiophene mixtures by pervaporation. Effect of carbon number and concentration of alkane, and of feed temperature, on the separation efficiency of alkane/thiophene mixtures was investigated experimentally. Experimental results of binary mixtures indicated that the total fluxes for different alkane/thiophene mixtures decrease with increase of carbon number in the alkanes. Corresponding activation energies of permeation for alkanes in PDMS membrane increase with increase of carbon number in the alkanes. Differences of molecular size and structure of the alkanes lead to various selectivities thereof within PDMS membrane. In addition, the permeability and activation energy of thiophene in various systems differ from each other due to coupling effect which should be taken into consideration when dealing with multicomponent systems. Pervaporation results of ternary systems indicated that, the increase of content of lighter alkane in feed would result in a larger total flux, but a smaller selectivity to thiophene simultaneously. A quaternary system, the mixture of n-heptane, n-octane, n-nonane and thiophene, was employed to simulate the desulfurization process of gasoline. With the membrane having a PDMS layer of 11 μm, the total flux was measured to be about 1.65 kg/m² h, with the corresponding enrichment factor of thiophene 3.9 at 30 °C.     

Synthesis of Enantiomerically Pure Carbohydrate-Derived Annulated Cyclopentadienes and Ferrocenes

The cyclopentadienes 3a/b/c, 8b/c, 12a/b/d , and 16a/b/d were prepared as mixtures of regioisomers from the D -mannitol-derivatives 1,6,10 , and 14 and transformed into the ferrocenes 17, 18 , and 19 (73%; 38:17:45), 23, 24 , and 25 (70%; 6:42 :52), 26 (31%), and 27 (27%), respectively. Deprotection of 17–19 with HCl/MeOH gave the H₂O-soluble ferrocenes 20–22 ; chloromercuration and iodination of 17 via 29 led to the C₂-symmetric diiodo-ferrocene 30 . The mono(chloromercurio) derivative 28 , obtained as a by-product, was also transformed into 29 . The structure of the ferrocenes 18 and 19 , and of the bis(chloromercurio)ferrocene 29 has been established by X-ray analysis. The starting cyclopentadienes 3 were obtained in 50% yield from 1 by dialkylation of CpNa, followed by thermolysis of the spiro-annulated 2 . Similarly, dimesylate 6 (from 4 ) gave the spiro-annulated diene 7 and the annulated dienes 8 in about equal amounts; thermolysis transformed 7 into 8 (62%). The dienes 12 were prepared in 15% yield from the ditriflate 10 via 11 , the dimesylate 9 proving insufficiently reactive, and the dienes 16 (49%) from 14 via 15 .     

Migration behavior and separation of active components in Glycyrrhiza uralensis Fisch and its commercial extract by micellar electrokinetic capillary chromatography

1-Anilinonaphthalene-8-sulfonic acid (1,8-ANS), 4,4'-dianilino-1,1'-binaphthyl-5,5'-disulfonic acid (bis-ANS) and 2-(p-toluidino)naphthalene-6-sulfonic acid (2,6-TNS) were evaluated as additives in different buffers for the detection of bovine whey proteins using laser-induced fluorescence (LIF) monitoring in capillary electrophoresis (CE). These N-arylaminonaphthalene sulfonates furnish a large fluorescence emission when associated to some proteins whereas their emission in aqueous buffers, such as those used in CE separations, is very small. To select the best detection conditions, the fluorescence of these probes was first compared using experiments carried out in a fluorescence spectrophotometer. Using bovine serum albumin (BSA) as a model protein, it was demonstrated that 2-(N-cyclohexylamino)ethanesulfonic acid (CHES) buffer (pH 8 and pH 10.2) and the fluorescent probe 2,6-TNS gave rise to the highest increase in fluorescence for BSA. When the composition of these separation buffers was optimized for the electrophoretic separations, CHES buffer, pH 10.2 was chosen as the most suitable buffer to detect bovine whey proteins. The limit of detection obtained for some whey proteins in CE separations was about 6.10(-8) M for BSA, 3.10(-7) M for beta-lactoglobulin A (beta-LGA), 3.10(-7) M for beta-lactoglobulin B (beta-LGB), and 3.10(-6) M for alpha-lactalbumin (alpha-LA). These detection limits were compared to those achieved using UV detection under the same separation conditions. The results showed that the detection limits of BSA, beta-LGA and beta-LGB were twice as good using LIF than with UV detection. However, the limit of detection for alpha-LA was better when UV was used. The applicability of LIF detection to CE separation of whey proteins in bovine milk samples was also demonstrated.     

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometric analysis of phospholipase A2 and fibrinolytic enzyme, two enzymes obtained from Chinese Agkistrodon blomhoffii Ussurensis venom

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) was used to analyze two enzymes, phospholipase A2 and fibrinolytic enzyme isolated from Chinese Agkistrodon blomhoffii Ussurensis venom. Using sinapinic acid as the matrix, positive ion mass spectra of the enzymes were obtained. In addition to the dominant protein [M + H]+ ions, multimeric and multiply charged ions were also observed in the mass spectra. The higher the concentration of the enzymes, the more multiply charged polymer and multimeric ions were detected. Our results indicate that MALDI-TOFMS can provide a rapid and accurate method for molecular weight determination of snake venom enzymes. Mass accuracies of 0.1 and 0.3% were achieved by analysis of highly dialyzed phospholipase A2 and fibrinolytic enzyme, and these results are much better than those obtained using sodium dodecyl sulfate-polyacrylamide gel electrophoresis. MALDI-TOFMS thus provides a reliable method to determine the purity and molecular weight of these enzymes, which are of potential use as therapeutants.     

[（n—C4H9）4N][EuxM1—x（TTA）4]（M=La、Sm、Gd、Tb）的光致发光

合成了一类组成为[(n-C4H9)4N][EuxM1-x(TTA)4](M=La、Sm、Gd、Tb）的固体配合物，通过测定其红外光谱，X射线粉末衍射谱和荧光光谱，研究了配合物结构和发光性质随Eu^3 浓度变化的规律。红外光谱和XRD谱的分析结果表明，在体系中没有新化合物生成，而荧光光谱分析结果表明发光强度与Eu^3 浓度不成线性关系，不发光的基质配合物组分对发光有不同大小和不同类型的影响，提出一种可能的发光机制解释这一共发光现象。     

Syntheses, structures, and magnetic properties of unusual nonlinear polynuclear copper(II) complexes containing derivatives of 1,2,4-triazole and pivalate ligands

Novel polynuclear Cu(II) complexes containing derivatives of 1,2,4-trizaole and pivalate ligands, [Cu(3)(mu(3)-OH)(mu-adetrz)(2)(piv)(5)(H(2)O)].6.5H(2)O (1) (adetrz = 4-amino-3,5-diethyl-1,2,4-triazole, piv = pivalate), [Cu(4)(mu(3)-OH)(2)(mu-atrz)(2)(mu-piv)(4)(piv)(2)].2MeOH.H(2)O (2) (atrz = 4-amino-1,2,4-triazole), [Cu(4)(mu(3)-OH)(2)(mu-tbtrz)(2)(mu-piv)(2)(piv)(4)].4H(2)O (3) (tbtrz = 4-tert-butyl-1,2,4-trizaole), and [Cu(4)(mu(3)-O)(2)(mu-admtrz)(4)(admtrz)(2)(mu-piv)(2)(piv)(2)].2[Cu(2)(mu-H(2)O)(mu-admtrz)(piv)(4)].13H(2)O [4 = 4a.2(4b).13H(2)O; admtrz = 4-amino-3,5-dimethyl-1,2,4-triazole], have been prepared and structurally characterized. 1 is an asymmetrical triangular complex containing a [Cu(3)(mu(3)-OH)] core with two Cu---Cu edges spanned by bridging adetrz ligands. 2, 3, and 4a are novel tetranuclear compounds containing a [Cu(4)(mu(3)-O)(2)] or [Cu(4)(mu(3)-OH)(2)] core with Cu---Cu edges spanned by bridging 1,2,4-triazole or pivalate ligands. 4b is a dinuclear compound with one admtrz and one water bridge, and it is the first dinuclear Cu(II) triazole complex with one bridging water molecule. 1 is one of few reported triangular Cu(II) complexes with derivatives of 1,2,4-triazole, while 2, 3, and 4a are the first group of the nonlinear tetranuclear Cu(II) compounds with derivatives of 1,2,4-triazole. Variable-temperature magnetic susceptibility studies on the powder samples of 1-3 reveal the overall antiferromagnetic coupling between Cu(II) ions with J values of -55.6 to -12.8 cm(-1) (1), -216.4 to 0 cm(-1) (2), and -259.8 to 4.8 cm(-1) (3).