INFLUENCE OF DIALKYLZINC IN RARE-EARTH TERNARY CATALYST ON THE COPOLYMERIZATION OF CARBON DIOXIDE AND PROPYLENE OXIDE

Rare-earth ternary catalysts Y（CCl3COO）3-ZnR2-glycerin were prepared for the copolymerization of carbon dioxide and propylene oxide （PO）, where dialkylzincs （ZnR2） were diethylzinc, di（n-propyl）zinc, di（n-butyl）zinc, di（i-propyl）zinc, di（i-butyl）zinc, di（s-butyl）zinc,respectively. The Y（CCl3COO）3-ZnR2-glycerin catalysts displayed the highest catalytic activity at the molar ratio of Y（CCl3COO）3：ZnR2：glycerin = 1：20：10. In the same copolymerization condition, catalysts containing dialkylzincs with branched alkyl group showed lower catalytic activity than that with primary alkyl group. For those catalysts including dialkylzincs with primary alkyl group, their catalytic activity decreases with increasing number of carbon atom in the alkyl group with the following sequence： Y（CCl3COO）3-ZnEt2-glycerin 〉 Y（CCl3COO）3-Zn（n- Pr）2-glycerin〉Y（CCl3COO）3-Zn（n-Bu）2-glycerin. However, the alkyl group in the dialkylzinc does not influence the insertion of PO into the propagation chain end.     

Novel CaCO3/g-C3N4 composites with enhanced charge separation and photocatalytic activity

A novel CaCO₃/graphitic carbon nitride (g-C₃N₄) photocatalyst was synthesized for the first time via a facile calcination method using CaCO₃ and melamine as precursors. The as-prepared samples were characterized using various techniques, such as scanning and transmission electron microscopy, X-ray diffraction, Brunauer-Emmett-Teller analysis, as well as Fourier-transform infrared, X-ray photoelectron, photoluminescence, and UV–vis diffuse reflectance spectroscopy. The results of the experiments confirm the successful coupling of CaCO₃ to g-C₃N₄. The photocatalytic activity of the synthesized CaCO₃/g-C₃N₄ composites was evaluated by assessing their performance in the photocatalytic degradation of crystal violet (CV) in water under visible light irradiation. The analysis shows that CaCO₃/g-C₃N₄ exhibits higher photocatalytic activity towards CV degradation (76.0%) than pristine g-C₃N₄ (21.6%) and CaCO₃ (23.2%). Radical trapping and electron spin resonance experiments show that hydroxyl radicals (OH) and holes (h⁺) are the key reactive species in the photocatalytic process. The enhanced photocatalytic activity of the composite is mainly attributed to the efficient separation rate of electron-hole pairs achieved through the incorporation of CaCO₃.     

[M(en)3] (ndt)•H2O的水热合成、晶体结构和光学性能 ( M=NiⅡ, CoⅡ, MnⅡ and ndt=1,5-naphthalenedithiolate )

水热条件下，合成了三个新的配合物[Ni(en)₃] (ndt) ·H₂O 1, [Co(en)₃] (ndt) ·H₂O 2 和[Mn(en)₃] (ndt) ·H₂O 3。晶体结构通过X-射线单晶衍射进行了表征。三个配合物均属于单斜晶系，Cc空间群。[M(en)₃]²⁺阳离子、ndt阴离子和结晶水分子通过氢键自组装出相同结构的三维网。通过紫外-可见-近红外漫反射光谱对这三个配合物的光吸收性能和能带进行了测定。     

2020 Roadmap on two-dimensional nanomaterials for environmental catalysis

This roadmap demonstrates a series of two-dimensional nanomaterials, such as graphene, black phosphorus, oxides, layered double hydroxides, chalcogenides, bismuth-based layered compounds, MXenes, metal organic frameworks, covalent organic frameworks, and others, for environmental catalysis.     

表面活性剂混合物水溶液中的囊泡形成

1:1烷基羧酸钠-溴化烷基三甲铵混合水溶液的浓度在cmc以上时, 能自发或超声分散形成一类新型混合表面活性剂囊泡(单层膜), 正负离子表面活性剂的突出囊泡形成能力以及不同表面活性剂结构组合变化所显现的多样特性, 皆预示出混合功能有序组合体研究的广阔前景。     

Study on multimers and their structures in molecular association mixture

Self-association system of(R)-1,3-butanediol in dilute carbon tetrachloride(CCl4)solution is studied as a model of molecular association mixture.Analysis methods including FSMWEFA(fixed-size moving window evolving factor analysis)combined with PCA(principal component analysis),SIMPLISMA (simple-to-use interactive self-modeling mixture analysis),and ITTFA(iterative target transformation factor analysis)are adopted to resolve infrared spectra of(R)-1,3-butanediol solution.Association number and equilibrium constant are computed.(R)-1,3-butanediol in dilute inert solution is determined as a monomer-trimer equilibrium system.Theoretical investigation of trimer structures is carried out with DFT(density functional theory),and structural factors are analyzed.     

Influence of the Size of Aromatic Chelate Ligands on the Structures of Cadmium(II) Tetracarboxylates Polymers: From 2D Layered Network to 3D Metal‐Organic Framework

To determine the influence of the size of the aromatic chelate ligands on the frameworks of metal tretracarboxylate polymers, two new coordination polymers [Cd(btc)_0.5 (2,2′‐bpy)] ( 1 ) and [Cd(btc)_0.5(phen)]·H₂O ( 2 ) (H₄btc = biphenyl‐3,3′,4,4′‐tetracarboxylic acid, 2,2′‐bpy = 2,2′‐bipyridine, phen = 1,10‐phenanthroline) have been synthesized under similar hydrothermal conditions. In complex 1 , the dimeric Cd₂ units are linked by bridging btc^4? ligand to form a 2D layered network, whereas complex 2 possesses a 3D metal‐organic framework consisting of the dimeric Cd₂ units. The differences of two metal‐organic frameworks demonstrate that the size of the rigid aromatic chelate ligands have an important effect on the structures of their complexes. Additionally, the two complexes show strong fluorescence in the solid state at room temperature.     

The structure and electrochemical characteristics of La0.67Mg0.33 (Ni0.8Co0.1Mn0.1) x (x=2.5–5.0) multiphase alloys for nickel-metal hydride batteries

This paper presents results concerning structure and electrochemical characteristics of the La_0.67Mg_0.33 (Ni_0.8Co_0.1Mn_0.1) _x (x=2.5–5.0) alloy. It can be found from the result of the Rietveld analyses that the structures of the alloys change obviously with increasing x from 2.5 to 5.0. The main phase of the alloys with x=2.5–3.5 is LaMg₂Ni₉ phase with a PuNi₃-type rhombohedral structure, but the main phase of the alloys with x=4.0–5.0 is LaNi₅phase with a CaCu₅-type hexagonal structure. Furthermore, the phase ratio, lattice parameter and cell volume of the LaMg₂Ni₉phase and the LaNi₅ phase change with increasing x. The electrochemical studies show that the maximum discharge capacity increases from 214.7 mAh/g (x=2.5) to 391.1 mAh/g (x=3.5) and then decreases to 238.5 mAh/g (x=5.0). As the discharge current density is 1,200 mA/g, the high rate dischargeability (HRD) increases from 51.1% (x=2.5) to 83.7% (x=3.5) and then decreases to 71.6% (x=5.0). Moreover, the exchange current density (I ₀) of the alloy electrodes first increases and then decrease with increasing x from 2.5 to 5.0, which is consistent with the variation of the HRD. The cell volume reduces with increasing x in the alloys, which is detrimental to hydrogen diffusion and accordingly decreases the low-temperature dischargeability of the alloy electrodes.     

基于小波变换的循环伏安弱信号特征信息提取

本研究采用连续小波变换(continuous wavelet transform，CWT)技术处理循环伏安弱信号，通过研究苯酚、对苯二酚和对硝基苯酚的共存体系循环伏安弱信号，表明CWT可以成功地识别出极弱信号中的指纹特征信息，并且经处理得到的对应的小波系数峰比原始信号更窄，更高，由此可以成功地确定弱峰的数目和位置。由循环伏安信号所得的结果，有力地证实CWT是循环伏安弱信号识别的有力工具，对于理解弱响应体系电化学机理具有重要作用。     

Single polymer molecules adsorbed to mica and the oppositely charged polymer/surfactant complexes formed at the air–water interface visualized by atomic force microscopy

In the present study, the structure and morphology of single sodium poly(styrenesulfonate) (PSS) molecules adsorbed to mica surface from the natural aqueous solution is investigated using atomic force microscopy technique. Results show that single PSS molecules are observed which show a morphology of wormlike coils. Meanwhile, single sodium poly(styrenesulfonate) (PSS)/Hexadecyltrimethylammonium bromide (CTAB) complexes deposited on mica from the air–water interface are also observed. However, the PSS/CTA⁺ complexes show different conformations by appearing in the morphology of circular patches. Experimental data are in fair agreement with the theoretical analysis.