Synthesis and Second‐Order Nonlinearities of Chiral Prolinol‐Substituted Chromophores

A new series of thiophene‐ and furan‐containing chromophores with a chiral prolinol donor and a sulfone acceptor has been synthesized. The UV‐vis absorptions, second‐order nonlinear optical properties, and X‐ray crystal structures are described.     

密胺树脂/硼酸锌双层包覆微胶囊化红磷的制备及其在阻燃聚烯烃中的应用

描述了采用密胺树脂和硼酸锌连续双层包覆微胶囊化红磷(MRP)的最新制备方法。采用红外光谱、电子能谱和透射电镜等分析手段对其进行了表征，并证实红磷已被完全包覆。实验数据表明：经包覆的MRP的热稳定性获得了明显改善，吸水率和磷化氢的发生量均大大减少。MRP作为阻燃助剂应用于聚烯烃阻燃材料表现出了良好的阻燃效果。实时红外和热失重测量以及扫描电镜观察表明：其阻燃机制是红磷受热时与树脂反应促进了含磷膨胀炭层的形成，从而提高了材料的热稳定性，碳层起到了隔氧、隔热作用，而且主要在凝聚相中发挥其阻燃作用。     

两个具有PTP1B抑制活性的4-羟基丁内酯化合物的全合成研究

Two new naturally 4-hydroxylated butenolides were concisely synthesized in excellent enantiomeric purities. An aldol condensation and a Suzuki reaction served successfully as the key steps in the synthesis.     

Guest sorption and desorption in the metal-organic framework [Co(INA)(2)] (INA=isonicotinate)--evidence of intermediate phases during desorption

The metal-organic framework [Co(INA)(2)]x0.5EtOH (INA = isonicotinate, NC(5)H(4)-4-CO(2)(-)), was synthesised under solvothermal conditions. Its X-ray crystal structure shows channels containing ethanol guests which are hydrogen-bonded to carboxylate oxygens of the framework. The pyridyl rings of the framework alternate between 'open' and 'closed' positions along the channels resulting in large variation in the channel cross-sectional area from ca. 1.4 by 2.3 A at the narrowest point to 4.9 by 5.3 A at the widest. Despite the very small windows, the ethanol guests (of van der Waals diameter ca. 4.2-6.1 A) may be reversibly desorbed and sorbed into the structure quantitatively, as shown by in situ variable-temperture IR spectroscopy and XRPD. The single-crystal structure of the desolvated form [Co(INA)(2)] shows that there is no change in the overall connectivity on desolvation, but the rotational positions of the pyridine rings are altered. This suggests that pyridyl rotation may occur to allow guests to pass in and out. When the synthesis was conducted in 1-propanol solvent [Co(INA)(2)]x0.5Pr(n)OHxH(2)O, was obtained, and a single-crystal X-ray structure revealed the same overall connectivity as in but with pyridine rings disordered over closed and open positions. There was no evidence of included guests from X-ray crystallography, suggesting that they are also highly disordered. Variable-temperature XRPD performed on bulk samples showed peaks which were unsymmetrical and exhibited shoulders, suggesting that for each pattern obtained the material actually consisted of several closely-related phases. The movements of the peaks during desolvation showed the presence of intermediate phases before the final desolvated product was formed. The peak positions of the intermediate phases matched more closely with the calculated pattern for than with or, suggesting that they may have disordered structures similar to. The results also suggest that the intermediate phase represents an initial increase in volume before a larger decrease in volume occurs to give the final desolvated material.     

Design,Synthesis, and Characterization of Photolabeling Probes for the Study of the Mechanisms of the Antiviral Effects of Ribavirin

Ribavirin, the only small molecule available so far for treating hepatitis‐C‐virus infection, was recently used in an emergency context to treat patients with severe acute respiratory syndrome (SARS) in the early stages of the disease. To study the mechanisms responsible for the antiviral effects of ribavirin by using a photolabeling approach, we designed, synthesized, and characterized the azidotriazole nucleosides 1 and 2 as photolabeling probes of ribavirin. These probes were synthesized either by performing nucleophilic substitution of the corresponding bromotriazole nucleoside with NaN₃ (Scheme 2) or by directly coupling the azidotriazole with the protected ribose sugar (Scheme 4). The azidotriazole nucleosides 1 and 2 showed a fast, clear‐cut photochemical reaction, which suggests that they are promising candidates for use in photolabeling studies.     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

Polysulfonylamine. CLX [1] Kristallstrukturen von Metall‐di(methansulfonyl)amiden. 10 [2] Die dreidimensionalen Koordinationspolymere M[(CH3SO2)2N] mit M = Kalium,Rubidium, Caesium (isotype Strukturen für M = K,Rb)

Polysulfonylamines. CLX. Crystal Structures of Metal Di(methanesulfonyl)amides. 10. The Three‐Dimensional Coordination Polymers M[(CH₃SO₂)₂N], where M is Potassium, Rubidium, Cesium (Isotypic Structures for M = K, Rb) Low‐temperature X‐ray crystal structures are reported for KA (monoclinic, space group P2₁/c, Z′ = 1), RbA (isotypic and isostructural with KA), and CsA (monoclinic, P2₁/n, Z′ = 1), where A^— denotes the anion obtained by deprotonation of the strong nitrogen acid (MeSO₂)₂NH. In KA and RbA, the anion is distorted into a rare C₁ conformation, whereas the standard C₂ conformation is retained in the cesium complex. The structures consist of three‐dimensional coordination networks, in which each cation adopts an irregular (O₆N)‐heptacoordination by forming close contacts to one (O, N)‐chelating, one (O, O)‐chelating and three κ¹O‐bonding ligands; however, the coordination number for Cs⁺ is effectively increased to 8 by a very short Cs···Cs contact distance of 422.5 pm. The crystal packings of the isotypic compounds KA and RbA display lamellar layer substructures that involve six independent ligand‐metal bonds and comprise an internal cation lamella and peripheral regions built up from anion monolayers; the 3D framework is completed by one independent M—O bond cross‐linking the layer substructures. In contrast, CsA features anion monolayers that intercalate planar zigzag chains of cations (Cs···Cs alternatingly 422.5 and 487.5 pm, Cs···Cs···Cs 135.7°), whereby each chain is surrounded and coordinated by four anion stacks and each anion stack connects two cation chains. All structures exhibit close C—H···A interanion contacts consistent with weak hydrogen bonding.     

Synthese und thermische Eigenschaften von molekularen Clusterverbindungen zusammengesetzt aus Elementen der Gruppen 11‐13‐16

Syntheses and Thermal Properties of Cluster Molecules, formed from Groups 11‐13‐16 Elements In the presence of PPh₃, CuX (X = Cl, CH₃COO) or AgOC(O)C₆H₅ and GaCl₃ react in THF with S(SiMe₃)₂ or Se(SiMe₃)₂ to yield [Cu₆Ga₈Cl₄S₁₃(PPh₃)₆] ( 1 ), [Cu₆Ga₈Cl₄Se₁₃(PPh₃)₆] ( 2 ), [Ag₆Ga₈Cl₄S₁₃(PPh₃)₆] ( 4 ) and [Ag₆Ga₈Cl₄Se₁₃(PPh₃)₆] ( 5 ). The use of PⁿPr₂Ph instead of PPh₃ and subsequent layering with n‐hexane leads to the formation of the cluster [Cu₆Ga₈Cl₄Se₁₃(PⁿPr₂Ph)₁₂] ( 3a , 3b ). Reaction of CuCl, GaCl₃ and PⁿPr₃ with Se(SiMe₃)₂ in THF results in the crystallisation of the ionic cluster (HPⁿPr₃)₂[Cu₂Ga₄Cl₄Se₆(PⁿPr₃)₄] ( 6 ). The structures of 1 — 6 were determined by X‐ray single crystal structure analysis. Thermogravimetric measurements of the cluster molecules and powder diffraction patterns of the remaining powders reveal the potential use of them as single source precursor compounds for the synthesis of the related ternary solid state materials.     

Studies on the Electrochemical Characteristics of K2FeO4 Electrode

Discharge performance of K2FeO4 electrode under different conditions was studied by the constant electric current discharge method. The electrochemical characteristics of K2FeO4 electrode were investigated for the first time by means of cyclic voltammetry. The results show that the K2FeO4 electrode made at moderate pressure (20MPa) and discharged at lower current has better discharge performance. It is also found that K2FeO4 electrode is significantly rechargeable.     

Hierarchical Structure‐Within‐Structure Morphologies in A2‐star‐(B‐alt‐C) Molecules

We employ dissipative particle dynamics (DPD) to examine the self‐assembly behavior of A₂‐star‐(B‐alt‐C) molecules. We successfully observe various types of hierarchical structure‐within‐structures, such as A‐formed spheres in the matrix formed by B and C alternating layers, hexagonally packed A‐formed cylinders in the matrix with B and C segregated layers, B and C alternating layers‐within‐lamellae, coaxial B and C alternating domains within hexagonally packed BC‐formed cylinders in the A‐matrix, and co‐centric BC‐alternating domains within BC‐formed spheres in the A‐matrix, by increasing the A composition. Generally speaking, the small length‐scale B and C segregated domains are in parallel to the large length‐scale structures. This hierarchical periodicity along the same axis as well as the various characteristic structures, that the A₂‐star‐(B‐alt‐C) copolymers display, are quite different from those in A‐block‐(B‐graft‐C) coil‐comb copolymers. Moreover, it is interesting to find that when the copolymer chain length increases, though the hierarchical structure type is maintained, the number of small length‐scale lamellae that can form within the large length‐scale structure increases. These hierarchical structures under various compositions are reported theoretically for the first time in the copolymer systems consisting of the alternating blocks, and are in good agreement with the most recent experimental work by Matsushita and co‐workers (Macromolecules 2007 , 40, 4023).