Isotope‐Coded Affinity Tagging Technique Using Avidin Functional Affinity Electrophoresis: An Alternative to an Avidin Affinity Column

Avidin functional affinity electrophoresis (AFAEP) is substituted for an avidin affinity column (AAC) to capture biotinylated peptides in the Isotope‐Coded Affinity Tagging (ICAT) technique which is a valuable tool in quantitative proteomics. In this new technique, the AFAEP‐captured ICAT‐labeled biotinylated peptides are extracted with the biotin tag intact from the polyacrylamide gel piece with aqueous 95% formamide (pH 8.2) at 65 °C for 20 min, and then detected by a matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometer. Bovine serum albumin (BSA) and the ¹²C‐ and ¹³C‐ICAT reagents are used to test this AFAEP‐ICAT technique. The results show that both AFAEP and AAC methods provide quantitative information of the relative amounts of ¹²C‐ and ¹³C‐ICAT‐labeled biotinylated tryptic peptides of BSA in a sample. Compared with AAC, the AFAEP is cheaper to perform, more stringent in capturing the biotinylated peptides, and capable of simultaneously processing multiple samples.     

Baylis-Hillman reactions of N-tosyl aldimines and aryl aldehydes with 3-methylpenta-3,4-dien-2-one

The attempted Baylis-Hillman reactions of N-tosyl aldimines and aryl aldehydes with 3-methylpenta-3,4-dien-2-one gave the corresponding Baylis-Hillman adducts 3 and 6 in moderate to good yields in the presence of DMAP in DMSO, respectively. In the case of the aza-Baylis-Hillman reactions of N-tosyl aldimines with 3-methylpenta-3,4-dien-2-one catalyzed by PBu3, the corresponding aza-Baylis-Hillman derivatives 4 and 5 were formed at the same time.     

Reductive Elimination of Phenylsulfonyl Groups in the 3‐Position of Benzo[a]heptalene‐2,4‐diols

3‐(Phenylsulfonyl)benzo[a]heptalene‐2,4‐diols 1 can be desulfonylated with an excess of LiAlH₄/MeLi?LiBr in boiling THF in good yields (Scheme 6). When the reaction is run with LiAlH₄/MeLi, mainly the 3,3′‐disulfides 6 of the corresponding 2,4‐dihydroxybenzo[a]heptalene‐3‐thiols are formed after workup (Scheme 7). However, the best yields of desulfonylated products are obtained when the 2,4‐dimethoxy‐substituted benzo[a]heptalenes 2 are reduced with an excess of LiAlH₄/TiCl₄ at ?78→20° in THF (Scheme 10). Attempts to substitute the PhSO₂ group of 2 with freshly prepared MeONa in boiling THF led to a highly selective ether cleavage of the 4‐MeO group, rather than to desulfonylation (Scheme 13).     

Grid‐like Cobalt(II) Layered Complex with an Unprecedented Double 1,2‐Bis(1,2,4‐triazole‐1‐yl)methane Bridges

A novel two‐dimensional cobalt complex, [Co(btrm)₂(dca)]ClO₄ ( 1 , btrm = 1,2‐bis(1,2,4‐triazole‐1‐yl)methane, dca = dicyanamide), was synthesized and characterized. X‐ray diffraction analyses reveal that the title complex crystallizes in the monoclinic space group C2/m with a = 29.507(13)Å, b = 17.804(8) Å, c = 14.709(7) Å, β = 119.916(7)°, Z = 12, and R₁ = 0.0784, wR₂ = 0.2041. The cobalt atom involves a six‐coordinated CoN₆ environment, with a distorted octahedral coordination. Two btrm ligands connect the Co^II atoms with the exodentate nitrogen atoms on the 4‐position of triazole rings to form a sixteen‐membered rhombic grid. The unprecedented double btrm bridges and μ_1,5‐dca bridge connect the cobalt atoms to form a two‐dimensional grid‐like layered structure. The spectroscopic and magnetic properties have also been investigated.     

MALDI-TOF-MS法对重组人内皮抑素蛋白分子质量测定

肿瘤的生长依赖于血管的生成,新生血管不仅为肿瘤生长提供必需的营养物质,而且为肿瘤细胞扩散提供了重要的途径。1997年哈佛大学的O'Reilly等发现了一种内源性新血管生成抑制因子内皮抑素(Endoscatin),显示出特异抑制激活的血管内皮细胞增殖和肿瘤新血管生成的生物学活性,其抗肿瘤作用具有高效、低毒、无耐药性的优点。目前,内皮抑素的研究引起了国内外广泛的兴趣,在美国已进行以安全性为目的的I期临床实验,国内也有多家公司对内皮抑素进行了抗肿瘤研究并申报一类新药。内皮抑素有望成为医治肿瘤而又没有化疗和放疗的毒副作用的一种新的治疗方法,但是否能作为药物应用于临床,尚需对内皮抑素的结构特点及抑制肿瘤和内皮细胞的作用机制等方面进行许多深入的研究。     

Immunosuppressive ent‐Kaurene Diterpenoids from Isodon serra

Three new enmein‐type ent‐kaurenoids, i.e., the two pairs 1 and 2 of 20‐epimers and the (20R)‐isomer 3 , besides the seven known diterpenoids 4 – 10 , were isolated from the aerial parts of Isodon serra. Their structures were elucidated by spectroscopic techniques and X‐ray diffraction. The immunosuppressive effect for T‐lymphocytes proliferation induced by Con A in BALB/c mouse was evaluated for the isolates 1 – 10 . They all displayed a remarkable inhibitory effect, with multi‐glycosides of Tripterygium wilfordii as positive reference substance (Table 3).     

What controls the melting properties of DNA-linked gold nanoparticle assemblies?

We report a series of experiments and a theoretical model designed to systematically define and evaluate the relative importance of nanoparticle, oligonucleotide, and environmental variables that contribute to the observed sharp melting transitions associated with DNA-linked nanoparticle structures. These variables include the size of the nanoparticles, the surface density of the oligonucleotides on the nanoparticles, the dielectric constant of the surrounding medium, target concentration, and the position of the nanoparticles with respect to one another within the aggregate. The experimental data may be understood in terms of a thermodynamic model that attributes the sharp melting to a cooperative mechanism that results from two key factors: the presence of multiple DNA linkers between each pair of nanoparticles and a decrease in the melting temperature as DNA strands melt due to a concomitant reduction in local salt concentration. The cooperative melting effect, originating from short-range duplex-to-duplex interactions, is independent of DNA base sequences studied and should be universal for any type of nanostructured probe that is heavily functionalized with oligonucleotides. Understanding the fundamental origins of the melting properties of DNA-linked nanoparticle aggregates (or monolayers) is of paramount importance because these properties directly impact one's ability to formulate high sensitivity and selectivity DNA detection systems and construct materials from these novel nanoparticle materials.     

Regioselective coupling of pentafluorophenyl substituted alkynes: mechanistic insight into the zirconocene coupling of alkynes and a facile route to conjugated polymers bearing electron-withdrawing pentafluorophenyl substituents

The reaction of Cp(2)ZrCl(2) with 2 equiv of BuLi at -78 degrees C, followed by the addition of an unsymmetrical tetra- or pentafluorophenyl substituted alkyne R(1)C[triple bond]CAr(f) (R(1), Ar(f) = (CH(2))(4)Me, p-C(6)F(4)H; Me, p-C(6)F(4)H; Ph, C(6)F(5)), resulted in regioselective couplings of these alkynes to zirconacyclopentadienes in which the Ar(f) substituents preferentially adopt the 3,4-positions (beta beta) of the zirconacyclopentadiene ring. With Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) as the zirconocene reagent, the couplings could be carried out at room temperature; however, at higher temperatures significant quantities of the 2,4-fluoroaryl substituted (alpha beta) isomers were also formed. None of the conditions employed produced the 2,5-fluoroaryl substituted (alpha alpha) isomers. These fluoroaryl-substituted zirconacyclopentadienes were readily converted to butadienes via reactions with acids. The zirconacyclopentadiene Cp(2)ZrC(4)-2,5-Ph(2)-3,4-(C(6)F(5))(2), which resulted from the coupling of PhC[triple bond]C(C(6)F(5)), was converted to the corresponding thiophene by reaction with S(2)Cl(2), and to an arene by reaction with MeO(2)CC[triple bond]CCO(2)Me/CuCl. Mechanistic studies on zirconocene couplings of (p-CF(3)C(6)H(4))C[triple bond]C(p-MeC(6)H(4)) indicate that the observed regioselectivities are determined by an electronic factor that controls the orientation of at least one of the two alkynes as they are coupled. Additionally, these studies suggest an unsymmetrical transition state for the zirconocene coupling of alkynes, and this is supported by DFT calculations. The reaction of [(C(6)F(5))C[triple bond]CCH(2)](2)CH(2) with Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) resulted in a zirconacyclopentadiene in which the pentafluorophenyl substituents have been forced into the 2,5-positions (alpha alpha). Zirconocene coupling of the diyne (C(6)F(5))C[triple bond]C-1,4-C(6)H(4)-C[triple bond]C(C(6)F(5)) provided a route to conjugated polymers bearing electron-withdrawing pentafluorophenyl groups.     

Optical properties of nanocrystalline Y2O3:Eu depending on its odd structure

The structure of nanocrystalline Y2O3:Eu prepared by a combustion reaction was analyzed by XRD and high-resolution electron microscopy. Compared with a large-scale particles, 5-nm Y2O3:Eu particles presented as distorted crystallite and rough surfaces. Luminescent and absorption properties of nano-Y2O3:Eu showed remarkably particle size effects. At Y2O3:Eu particle sizes smaller than 10 nm some new results were observed: (a) a red shift of the charge-transfer-state absorption; (b) new emission bands of Eu3+ in the 5D0 --> 7F2 region; (c) luminescent decay of energy level 5D0 of Eu3+ turning to a two-step exponential; and (d) a pronounced increase in quenching concentration and much lower phonon density compared with those of the bulk material. All these phenomena can be attributed to the effect of the softened lattice and surface state of the nanomaterial. The latter was confirmed by stronger excitation by the host absorption after the surface modification.     

Catalytic Spectrophotometric Determination of Ultratrace Amounts of Silver with Solubilizing Effect of Nonionic Surfactant

ＩｎｔｒｏｄｕｃｔｉｏｎＴｒｉａｚｅｎｅｒｅａｇｅｎｔｓａｒｅｉｎｔｅｒｅｓｔｉｎｇｂｅｃａｕｓｅｏｆｔｈｅｉｒｓｔｒｏｎｇｃｏｍｐｌｅｘａｔｉｏｎａｂｉｌｉｔｉｅｓｗｉｔｈｔｒａｎｓｉｔｉｏｎｍｅｔａｌｓ .1 6Ｈｏｗｅｖｅｒ,ｌｉｔｔｌｅｄｅｃｏｌｏｒａｔｉｏｎｏｆｔｈｅｍｃａｔａｌｙｚｅｄｂｙｓｉｌｖｅｒｉｏｎｈａｓｂｅｅｎｓｔｕｄｉｅｄｉｎａｎａｌｙｔｉｃａｌｃｈｅｍｉｓｔｒｙ .Ｍａｎｙａｎａｌ ｙｓｉｓｔｓｈａｖｅｒｅｐｏｒｔｅｄｔｈｅｕｓｅｏｆｃａｔａｌｙｔｉｃｒｅａｃｔｉｏｎｓｆｏｒｔ…