内源全息术的原理和数学描述

以往的全息术在对原子成像时,在相干光源、探测器空间分辨和信号强度三个方面遇到了难以克服的困难. 阐述了内源全息术克服这些困难的原理,研究了内源全息术的记录和再现全过程,推导出内源球面全息图的再现公式,并在散射因子球对称近似和能量无关近似下,推导出以δ函数表示原子全息再现像的解析表达式. 关键词： 内源全息术 同步辐射 晶体结构 傅里叶变换     

Fe/Si多层膜的层间耦合与界面扩散

对以本征Si及重掺杂ｐ型和ｎ型Si作为中间层的Fe/Si多层膜的层间耦合进行研究，并通过退火，增大Fe，Si之间的扩散，分析界面扩散对层间耦合的影响. 实验结果表明，层状结构良好的制备态的多层膜，Fe，Si之间也存在一定程度的扩散，它是影响层间耦合的 主要因素，远远超过了半导体意义上的重掺杂，使不同种类的Si作为中间层的层间耦合基本 一致.进一步还发现，在一定范围内增大Fe，Si之间的扩散，即使多层膜的层状结构已经有了相当的退化，Fe/Si多层膜的反铁磁耦合强度基本保持不变. 关键词： Fe/Si多层膜 层间耦合 界面扩散     

QuantBasic软件用于红外光谱定量分析

化学计量学原理引入到红外光谱学后 ,使得红外光谱定量分析有了突破性进展。利用 MB15 4S型FTIR光谱仪专配的 Quant Basic定量软件 ,对红外光谱定量分析中基线取法进行了研究 ,并得出最优方法。通过对己二酸进行定量分析 ,验证了此软件对混合物中单组分定量不仅操作简便 ,快速可行 ,而且简化了训练集的建立和样品前处理     

氦原子及类氦离子基态能量的经验公式

通过对氦原子和类氦离子电离能数据的分析 ,找到了一个能够快速计算类氦体系基态能量的经验公式 ,验算了一些类氦离子 (Z=2— 1 5 )的基态能量 ,与实验测量值符合得很好。除了 Li 和 Be 的基态能量的相对偏差为 0 .4 46 %外 ,其他的都低于 0 .4 %。     

Deposition of Au/TiO2 film by pulsed laser

Au nanoparticles, which were photoreduced by a Nd:YAG laser in HAuCl₄ solution containing TiO₂ colloid and accompanied by the TiO₂ particles, were deposited on the substrate surface. The film consisting of Au/TiO₂ particles was characterized by the absorption spectra, scanning electron microscopy (SEM) and X-ray diffraction (XRD) analysis. The adhesion between the film and substrate was evaluated by using adhesive tape test. It was found that the presence of TiO₂ dramatically enhanced the adhesion strength between the film and the substrate, as well as the deposition rate of film. The mechanism for the deposition of Au/TiO₂ film was also discussed.     

ToF-SIMS analysis of a fluorocarbon-grafted PET with a gold cluster ion source

Cluster ions have been recognized as a superb primary species in time of flight secondary ion mass spectroscopy (ToF-SIMS) compared with monatomic primary ions, as they significantly enhance the secondary ion yields from bulk samples. Self-assembled monolayers provide an important system for studying the fundamental mechanism involved in the yield enhancement.We used a gold cluster ion source to analyze a new type of self-assembled monolayer: a fluorocarbon-grafted polyethylene terephthalate. In addition to the structure details, which helped to understand the grafting mechanism, ToF-SIMS analysis revealed that fluorocarbon secondary ion yield enhancements by cluster ions were due to the enhanced sputter efficiency. A larger information depth may also be expected from the enhancement. Both mathematical definitions of damage cross-section and disappearance cross-section were revisited under a new context. Another cross-section parameter, sputter cross-section, was introduced to differentiate the beam induced sputter process from damage process.     

Observation of an excited charm baryon Omega c* decaying to Omega c0gamma

We report the first observation of an excited singly charmed baryon Omega c* (css) in the radiative decay Omega c0gamma, where the Omega c0 baryon is reconstructed in the decays to the final states Omega(-)pi+, Omega(-)pi+pi0, Omega(-)pi+pi(-)pi+, and Xi(-)K(-)pi+pi+. This analysis is performed using a data set of 230.7 fb(-1) collected by the BABAR detector at the PEP-II asymmetric-energy B factory at the Stanford Linear Accelerator Center. The mass difference between the Omega c* and the Omega c0 baryons is measured to be 70.8+/-1.0(stat)+/-1.1(syst) MeV/c2. We also measure the ratio of inclusive production cross sections of Omega c* and Omega c0 in e+e(-) annihilation.     

整体毛细管X光透镜在大气颗粒物单颗粒分析中的应用

对大气颗粒物进行单颗粒X射线荧光(XRF)分析,是一种识别大气颗粒物来源的有力手段.为了利用实验室X射线光源对大气颗粒物进行单颗粒XRF分析,建立了基于整体毛细管X光透镜和实验室X射线光源的微束X射线谱仪.透镜焦斑处的功率密度增益在103数量级,焦斑直径为30 μm左右.该微束X射线谱仪对Fe-Kα线的最小探测极限为0.7 Pg.在Mo靶光源电压和电流分别为30 kV和50 mA的条件下,利用该谱仪对直径为9 μm的大气颗粒物单颗粒进行XRF分析时,测谱时间在180 s左右.实验表明,基于毛细管X光透镜和实验室X射线光源的微束X射线分析技术在大气颗粒物单颗粒分析中有着潜在的应用价值.     

Installation and cosmic ray test of the high voltage system of the BESⅢ drift chamber

After examination of the designed high voltage power supply system of the BESⅢ drift chamber in the beam test of the full length prototype of drift chamber, a full system covering all the channels of high voltage was installed. The system's training and the high voltage value adjustment were carried out in the cosmic ray test of the BESⅢ drift chamber. The cosmic ray test for the full system and its final installation on the BESⅢ drift chamber were reported. The full system of high voltage power supply works stably and reliably.     

X射线衍射增强成像中的定量测量

提出了一种基于X射线衍射增强成像(DEI)断层计算机X射线层析术(CT)图像的物体尺寸精确测量方法.X射线衍射增强成像是一种基于相位衬度的成像技术.通过建立DEI的简化模型,研究衍射成像过程中品体转角、投影图像谷点位置、成像系统等效模糊等因素之间关系,由此具体探讨了系统模糊效应对圆物体边界成像带来的位置偏移,并以圆形被测样品为例.提出可精确测定直径的简单有效算法.通过理论仿真模型数据和北京同步辐射装置上的实测数据验证了该算法的精度.该方法实现了利用DEI图像对被测物体几何尺寸的精确测量,可用于对牛物组织样品等物体内部微小结构的尺寸的精确测量.