Effects of antimony on the surface tension of molten silicon

The effect of antimony concentration (C(Sb)/mass%) on the surface tension of molten silicon has been determined with the sessile drop method in the temperature range from 1693 to 1773 K and in the range of the oxygen partial pressure, Po(2), in an Ar atmosphere from 10(-23) to 10(-21) MPa. The results show that the surface tension of molten silicon decreases with increasing Sb concentration in the range of C(Sb)<0.9 mass%, which indicates positive adsorption of Sb in molten silicon and can be fairly described with the Szyszkowski's equation. The maximum decrease rate of surface tension is about 65 mN m(-1) (mass% C(Sb))(-1), and the temperature coefficient of surface tension, (partial differential sigma/ partial differential T)C(Sb), increases with increasing C(Sb). The evaporation of the systems was only observed between the melting points of antimony (904 K) and silicon (1683 K), and the surface tension presents no dependence on measuring time above the melting point of silicon.     

Incorporation of carboxylation multiwalled carbon nanotubes into biodegradable poly(lactic-co-glycolic acid) for bone tissue engineering

Biodegradable poly(lactic-co-glycolic acid) (PLGA)/carboxyl-functionalized multi-walled carbon nanotube (c-MWCNT) nanocomposites were successfully prepared via solvent casting technique. Rat bone marrow-derived mesenchymal stem cells (MSCs) were employed to assess the biocompatibility of the nanocomposites in vitro. Scanning electron microscopy (SEM) observations revealed that c-MWCNTs gave a better dispersion than unmodified MWCNTs in the PLGA matrix. Surface properties were determined by means of static contact angle, X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) analysis. The presence of c-MWCNTs increased the mechanical properties of the nanocomposites. Seven-week period in vitro degradation test showed the addition of c-MWCNTs accelerated the hydrolytic degradation of PLGA. In addition, SEM proved that the cells could adhere to and spread on films via cytoplasmic processes. Compared with control groups, MSCs cultured onto PLGA/c-MWCNT nanocomposites exhibited better adhesion and viability and also displayed significantly higher production levels of alkaline phosphatase (ALP) over 21 days culture. These results demonstrated that c-MWCNTs modified PLGA films were beneficial for promoting cell growth and inducing MSCs to differentiate into osteoblasts. This work presented here had potential applications in the development of 3-D scaffolds for bone tissue engineering.     

Solid-phase synthesis of imidazo[1,2-a]pyridine using sodium benzenesulfinate as a traceless linker

[formula: see text] The preparation of the first library of imidazo[1,2-a]pyridine derivatives on a solid support is described. A sulfone linker strategy was applied in the synthesis. Key steps involved in the solid-phase synthetic procedure include (i) alpha-haloketone resin formation by sulfinate-->sulfone alkylation, (ii) imidazo[1,2-a]pyridine ring formation by treatment with 2-aminopyridine, (iii) sulfone anion alkylation, and (iv) traceless product release by oxidation-elimination. A library of 12 imidazo[1,2-a]pyridines was synthesized.     

二茚基稀土胺化物催化丙烯腈聚合

用二茚基稀土胺化物Ind2LnN(i-Pr)2(Ln=Y,Yb)作为单组分催化剂催化丙烯腈聚合,研究了催化剂用量、单体浓度及聚合温度对标题化合物的催化活性和所得聚丙烯腈的分子量的影响。提高聚合发应温度可明显提高催化活性,当聚合温度达50℃,单体浓度为5.1mol     

膜反应器中萘普生甲酯的动态拆分

在碱催化连续原位消旋条件下,利用CRL脂肪酶（Candida rugosa lipase）催化的萘普生甲酯立体选择性水解反应。动态拆分制备（S）－普生。使用硫水硅橡胶膜隔离生物催化拆分反应和碱催化消旋反应,解决了常规动态拆分反应中生物催化剂难以承受原位化学消旋苛刻反应条件的难题。为了利于从水－有机溶剂乳化体系中分离产物和克服产物抑制,将亲水半透膜引入搅拌罐反应器,在该膜反应器中进行动态拆分反应。当转化率超过60％时,产物（S）－萘普生的对映体过量值（eep)仍在96％以上,在反应过程中还发现CRL脂肪酶同工酶的转化。     

新的手性双膦配体的合成及其在苯乙烯不对称氢酯基化中的应用

以甘露醇和山梨醇为原料,合成了2个新的手性膦配体,并用这些新的手性膦配体与钯原位生成的催化剂体系催化苯乙烯的不对称氢酯基化反应,得到R构型的2－苯基丙酸甲酯,其ee值分别为28.5%和13.6%。     

Factors affecting the nodule size of asymmetric PMMA membranes

Several factors that may affect the surface nodule size of a polymeric membrane were under investigation. The increase of polymer concentration and molecular weight were found to increase the surface nodule size. The increase of casting temperature also resulted in an increase in nodule size. These results supported that the radius of gyration and the collision frequency between polymer chains were the key factors affecting the nodule size. However, when the radius of gyration was reduced by the use of a poor solvent or by pre-adding nonsolvent in the casting solution, the surface nodule size increased. It suggested that there existed other factors affecting the nodule size on membrane surface besides the gyration radius and the collision frequency of polymer chains. In this study, we found in most cases that the surface nodule size decreased along with the surface tension difference between the casting solution and the coagulant. To demonstrate the effect of surface tension, we examined the nodule size inside the membranes where the nodule formation was not significantly affected by the interfacial tension. Opposite to what was observed on the surface, the nodule size increased with the solvation power of the solvent. This result suggested that it was the interfacial tension that overpowered the gyration radius in affecting the surface nodule size.     

高效液相色谱法测定柳树皮提取物中的水杨甙

 建立了一种测定柳树皮提取物中水杨甙的反相高效液相色谱法。该法采用KromasilC18(4 6mmi.d .× 2 5 0mm ,5 μm)色谱柱 ,以甲醇 0 0 1mol/LKH2 PO4 缓冲液 (pH 4 0 1) (体积比为 15∶85 )的混合溶液作流动相 ,流速为1 0mL/min ,紫外检测波长为 2 6 5nm ,灵敏度为 0 0 4AUFS。在 8 89mg/L～ 2 84 40mg/L的范围内 ,水杨甙的峰面积Y与其质量浓度X的线性关系良好 ,回归方程为Y =- 2 91 5 2 6 0 +5 0 0 0 0 34X(r =0 9998)。水杨甙的平均回收率为 96 1%～ 10 1 2 % (n =5 ) ,相对标准偏差 (RSD)为 1 43%。该法操作简便、快速、准确。