发射光谱研究多针对板电晕放电O活性原子特性

利用发射光谱技术在大气压下测量了空气中多针对板负直流电晕放电和正电晕流光放电产生的O(3p5 P→3s 5 S02777.4nm)活性原子发射光谱。在负电晕放电中,研究了放电功率、电极间距、N2含量和相对湿度等因素对O活性原子产生过程的影响;在正电晕流光放电阶段,研究了O活性原子相对密度在放电反应空间的分布特点。结果表明:O活性原子产量随放电功率的增加而增大,随电极间距增大而减少,随相对湿度和氮气含量的增加,其产量先增大后减少;O活性原子相对密度沿针尖轴向呈先增大后减小的趋势。     

Heritability and linkage study on heart rates in a Mongolian population

Elevated heart rate has been proposed as an independent risk factor for cardiovascular diseases, but their interrelationships are not well understood. In this study, we performed a genome-wide linkage scan in 1,026 individuals (mean age 30.6 years, 54.5% women) from 73 extended families of Mongolia and determined quantitative trait loci that influence heart rate. The DNA samples were genotyped using deCODE 1,039 microsatellite markers for 3 cM density genome-wide linkage scan. Correlation analysis was carried out to evaluate the correlation of the covariates and the heart rate. T-tests of the heart rate were also performed on sex, smoking and alcohol intake. Consequently, this model was used in a nonparametric genome-wide linkage analysis using variance component model to create a multipoint logarithm of odds (LOD) score and a corresponding P value. In the adjusted model, the heritability of heart rate was estimated as 0.32 (P<.0001) and a maximum multipoint LOD score of 2.03 was observed in 77 cM region at chromosome 18. The second largest LOD score of 1.52 was seen on chromosome 5 at 216 cM. Genes located on the specified locations in chromosomes 5 and 18 may be involved in the regulation of heart rate.     

A novel phosphorus‐containing thermotropic liquid crystalline poly(ester‐imide) with high flame retardancy

A novel phosphorus–nitrogen thermotropic liquid crystalline poly(ester‐imide) (PN‐TLCP) derived from p‐acetoxybenzoic acid (ABA), terephthalic acid (TPA), acetylated 2‐(6‐oxide‐6H‐dibenz<c,e><1,2>oxa phosphorin‐ 6‐yl)‐1,4‐dihydroxy phenylene (DOPO‐AHQ) and N,N'‐hexane‐1,6‐diylbis(trimellitimide) was prepared by melt transesterification. The chemical structure, the mesophase behavior, and the thermal properties of the copolymer were investigated with Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance spectroscopy (¹H NMR), elemental analysis, wide‐angle X‐ray diffraction (WAXD), hot‐stage polarized light microscopy (PLM), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). PN‐TLCP exhibited a nematic mesophase with a strong birefringence at a low and broad mesomorphic temperature ranging from 220 to 350°C, an initial flow temperature as low as about 190°C and a glass transition temperature of about 160°C. PN‐TLCP has also good thermal stability, high char residues and excellent flame retardancy (limiting oxygen index, LOI = 71 and UL‐94 V‐0 rating). Copyright © 2009 John Wiley & Sons, Ltd.     

Dual Photosensitizer Coupled Three-Dimensional Metal-Covalent Organic Frameworks for Efficient Photocatalytic Reactions

In this work, we innovatively assembled two types of traditional photosensitizers, that is pyridine ruthenium/ferrum (Ru(bpy)₃²⁺/Fe(bpy)₃²⁺) and porphyrin/metalloporphyrin complex (2HPor/ZnPor) by covalent linkage to get a series of dual photosensitizer-based three-dimensional metal-covalent organic frameworks (3D MCOFs), which behaved strong visible light-absorbing ability, efficient electron transfer and suitable band gap for highly efficient photocatalytic hydrogen (H₂) evolution. Rubpy-ZnPor COF achieved the highest H₂ yield (30 338 μmol g⁻¹ h⁻¹) with apparent quantum efficiency (AQE) of 9.68 %@420 nm, which showed one of the best performances among all reported COF based photocatalysts. Furthermore, the in situ produced H₂ was successfully tandem used in the alkyne hydrogenation with ≈99.9 % conversion efficiency. Theoretical calculations reveal that both the two photosensitizer units in MCOFs can be photoexcited and thus contribute optimal photocatalytic activity. This work develops a general strategy and shows the great potential of using multiple photosensitive materials in the field of photocatalysis.     

MiR-1224-5p modulates osteogenesis by coordinating osteoblast/osteoclast differentiation via the Rap1 signaling target ADCY2

MicroRNAs (miRNAs) broadly regulate normal biological functions of bone and the progression of fracture healing and osteoporosis. Recently, it has been reported that miR-1224-5p in fracture plasma is a potential therapy for osteogenesis. To investigate the roles of miR-1224-5p and the Rap1 signaling pathway in fracture healing and osteoporosis development and progression, we used BMMs, BMSCs, and skull osteoblast precursor cells for in vitro osteogenesis and osteoclastogenesis studies. Osteoblastogenesis and osteoclastogenesis were detected by ALP, ARS, and TRAP staining and bone slice resorption pit assays. The miR-1224-5p target gene was assessed by siRNA-mediated target gene knockdown and luciferase reporter assays. To explore the Rap1 pathway, we performed high-throughput sequencing, western blotting, RT-PCR, chromatin immunoprecipitation assays and immunohistochemical staining. In vivo, bone healing was judged by the cortical femoral defect, cranial bone defect and femoral fracture models. Progression of osteoporosis was evaluated by an ovariectomy model and an aged osteoporosis model. We discovered that the expression of miR-1224-5p was positively correlated with fracture healing progression. Moreover, in vitro, overexpression of miR-1224-5p slowed Rankl-induced osteoclast differentiation and promoted osteoblast differentiation via the Rap1-signaling pathway by targeting ADCY2. In addition, in vivo overexpression of miR-1224-5p significantly promoted fracture healing and ameliorated the progression of osteoporosis caused by estrogen deficiency or aging. Furthermore, knockdown of miRNA-1224-5p inhibited bone regeneration in mice and accelerated the progression of osteoporosis in elderly mice. Taken together, these results identify miR-1224-5p as a key bone osteogenic regulator, which may be a potential therapeutic target for osteoporosis and fracture nonunion.Subject terms: Translational research, Cell signalling     

A deflection system to reduce the interference from post-source decay product ions in photodissociation tandem time-of-flight mass spectrometry

A deflection system consisting of four deflectors was designed and used to reduce the interference from post-source decay (PSD) product ions in photodissociation (PD) tandem time-of-flight (TOF) mass spectrometry. For simple protonated peptides generated by matrix-assisted laser desorption/ionization, the presence of PSD product ions at the laser irradiation spot was found to noticeably alter the minor peaks in the PD spectra even though the major ones were hardly affected. Other benefits from the use of the deflection system such as the improvement in the resolving power in PSD tandem mass spectra are discussed.     

Soluble and easily crystallized anthracene derivatives: precursors of solution-processable semiconducting molecules

New soluble anthracene derivatives containing thiophene and phenylenevinylene derivatives were synthesized via well-known synthetic routes. TIPS derivatives were added at the 9,10-positions of anthracene for the solubility and crystallinity. Both of the molecules were found to be promising for high charge mobility and stable organic semiconductors. The soluble anthracene core (TIPSAnt) is a potential precursor for the synthesis of novel semiconducting materials.     

De Novo Design and Synthesis of a γ‐Turn Peptidomimetic Scaffold and Its Application as JNK3 Allosteric Ligand

As a way to develop a neuroprotective agent for the JNK3‐JIP1‐binding site, peptidomimetics of JIP‐1 as JNK3 allosteric regulators have been examined. The study consisted of in silico scaffold hopping, molecular docking, solution and solid‐phase peptide syntheses, and K_d measurements using surface plasmon resonance. As a peptidomimetic of JIP1, heptamer mimetic 16 (K_d=2.72 μm ) displayed a higher affinity than decamer JIP1 (K_d=23.6 μm ). The high affinity of 16 implies that the characteristic γ‐turn mimetic structure, “”Φ‐X‐Φ“ hydrophobic motif in 16 , increased its affinity toward the JIP‐site of JNK3.     

Smart poly(2-hydroxyethyl methacrylate/itaconic acid) hydrogels for biomedical application

pH- and temperature-sensitive hydrogels, based on 2-hydroxyethyl methacrylate (HEMA) and itaconic acid (IA) copolymers, were prepared by γ-irradiation and characterized in order to examine their potential use in biomedical applications. The influence of comonomer ratio in these smart copolymers on their morphology, mechanical and thermal properties, biocompatibility and microbe penetration capability was investigated. The mechanical properties of copolymers were investigated using the dynamic mechanical analysis (DMA), while their thermal properties and morphology were examined by thermogravimetric analysis (TGA) and scanning electron microscopy (SEM). The morphology, mechanical and thermal properties of these hydrogels were found to be suitable for most requirements of biomedical applications. The in vitro study of P(HEMA/IA) biocompatibility showed no evidence of cell toxicity nor any considerable hemolytic activity. Furthermore, the microbe penetration test showed that neither Staphylococcus aureus nor Escherichia coli passed through the hydogel dressing; thus the P(HEMA/IA) dressing could be considered a good barrier against microbes. All results indicate that stimuli-responsive P(HEMA/IA) hydrogels have great potential for biomedical applications, especially for skin treatment and wound dressings.     

Microchip electrophoretic separation for the fast diagnosis of Anaplasma phagocytophilum infection in cattle

We report a diagnostic method for Anaplasma phagocytophilum (A. phagocytophilum) infection in cattle using a nested PCR and microchip electrophoresis (ME). A. phagocytophilum causes human granulocytic anaplasmosis and granulocytic ehrlichiosis, which are emerging tick‐borne zoonotic diseases. Nested PCR was used to amplify genomic DNA samples extracted from cattle blood. The amplified PCR products were analyzed under a sieving gel matrix of 0.7% poly(ethyleneoxide) (M_r=8 000 000) in a conventional glass microchip. In the ME assay, A. phagocytophilum was analyzed within 35 s with a relative standard deviation of 1.30% (n=5) using a programmed field strength gradient (PFSG) as follows: 615.3 V/cm for 0–24 s, 66.7 V/cm for 24–34 s, 615.3 V/cm for 34–100 s. The ME‐PFSG assay was clinically validated by comparing the 16S rRNA gene levels obtained by this method with those measured using conventional slab gel electrophoresis performed with ten cattle blood samples suspected of A. phagocytophilum infection. In contrast to slab gel electrophoresis, the proposed ME‐PFSG methodology had increased sensitivity (200–450 pg/μL), a faster analysis time (<35 s), and required a smaller sample volume (～162 fL).