毛细管电泳叠加对比法测定阿片粉中吗啡的含量

 用毛细管区带电泳 ,以叠加对比法对阿片粉中的吗啡进行了定量分析 ,样品的回收率为 10 0 .6 % ,峰迁移时间的相对标准偏差 (RSD)不大于 2 .4 % ,相对迁移时间的RSD不大于 1.1% ,相对峰面积的RSD不大于 0 .5 1%。与内标对比工作曲线法作了比较 ,实验表明两种分析方法的结果无显著性差异 ,叠加对比法具有简便、快速、准确的优点 ,可用于样品中有效成分的快速定量。     

Noncompetitive enzyme immunoassay for α-fetroprotein using flow injection chemiluminescence

A novel, direct noncompetitive flow injection enzyme immunoassay for α-fetoprotein (AFP) was developed by enhanced chemiluminescence detection. The method was based on off-line incubation of AFP and horseradish peroxidase (HRP)-labeled anti-AFP, and then trapping of the unbound enzyme conjugate by an immunoaffinity column filled with AFP-modified Sepharose. The immunocomplex formed in incubation passed through the column and then was directly detected by a postcolumn chemiluminescence technique. The optimal conditions for the immunoassay procedure and chemiluminescence detection were established. At a 1:10 dilution of enzyme conjugate solution, the linear range for chemiluminescence detection of AFP was from 2.0 to 75 ng/mL with a correlation coefficient of 0.993 and a coefficient of variation of 2.67% at 30 ng/mL. The detection limit was 0.5 ng/mL. This method was flexible, sensitive, and rapid. The immunoaffinity column of 200 μL could be repeatedly used 100 times without a single decrease. The whole assay time including the preincubation step was only 30 min for one sample.     

Anionic ligand effect on the nature of epoxidizing intermediates in iron porphyrin complex-catalyzed epoxidation reactions

We have studied an anionic ligand effect in iron porphyrin complex-catalyzed competitive epoxidations of cis- and trans-stilbenes by various terminal oxidants and found that the ratios of cis- to trans-stilbene oxide products formed in competitive epoxidations were markedly dependent on the ligating nature of the anionic ligands. The ratios of cis- to trans-stilbene oxides obtained in the reactions of Fe(TPP)X (TPP = meso-tetraphenylporphinato dianion and X(-) = anionic ligand) and iodosylbenzene (PhIO) were 14 and 0.9 when the X(-) of Fe(TPP)X was Cl(-) and CF(3)SO(3)(-), respectively. An anionic ligand effect was also observed in the reactions of an electron-deficient iron(III) porphyrin complex containing a number of different anionic ligands, Fe(TPFPP)X [TPFPP = meso-tetrakis(pentafluorophenyl)porphinato dianion and X(-) = anionic ligand], and various terminal oxidants such as PhIO, m-chloroperoxybenzoic acid (m-CPBA), tetrabutylammonium oxone (TBAO), and H(2)O(2). While high ratios of cis- to trans-stilbene oxides were obtained in the reactions of iron porphyrin catalysts containing ligating anionic ligands such as Cl(-) and OAc(-), the ratios of cis- to trans-stilbene oxide were low in the reactions of iron porphyrin complexes containing nonligating or weakly ligating anionic ligands such as SbF(6)(-), CF(3)SO(3)(-), and ClO(4)(-). When the anionic ligand was NO(3)(-), the product ratios were found to depend on terminal oxidants and olefin concentrations. We suggest that the dependence of the product ratios on the anionic ligands of iron(III) porphyrin catalysts is due to the involvement of different reactive species in olefin epoxidation reactions. That is, high-valent iron(IV) oxo porphyrin cation radicals are generated as a reactive species in the reactions of iron porphyrin catalysts containing nonligating or weakly ligating anionic ligands such as SbF(6)(-), CF(3)SO(3)(-), and ClO(4)(-), whereas oxidant-iron(III) porphyrin complexes are the reactive intermediates in the reactions of iron porphyrin catalysts containing ligating anionic ligands such as Cl(-) and OAc(-).     

Syntheses and Structures of Zinc(II) Co‐Ordination Polymers Bridged by Flexible Bidentate Nitrogen Ligands

The reaction of Zn(NO₃)₂·6H₂O and bpp (bpp = 1,3‐Bis(4‐pyridyl)pronpane) in CH₃OH afforded the complex [Zn(bpp)(NO₃)₂]_n, 1 . The IR has been recorded and the structure has been determined. Crystal data for 1: Space group P2(1)/n, a = 11.749(1), b = 11.413(1), c = 11.942(1) Å, β = 96.06(6)°. V = 1592.5(3) ų, Z = 4 with final residuals R1 = 0.0484 and wR2 = 0.0984. The complexes show supramolecular structure in the solid state by intermolecular hydrogen bonding interaction.     

Study on porous silk fibroin materials: 3. Influence of repeated freeze–thawing on the structure and properties of porous silk fibroin materials

The influence of repeated freeze–thawing on pore structural characteristics and physical properties of porous silk fibroin materials prepared by freeze drying were studied. It showed that when quick‐frozen silk fibroin solution was repeatedly thawed and frozen before being vacuum dried, thus pore size of prepared porous silk fibroin materials increased from 67 µm to about 120 µm, and pore density decreased from 80 per square millimeter to about 28 per square millimeter; at the same time compression ratio and moisture permeability increased from 22.7% and 230 g/m² hr to about 33.7% and 308 g/m² hr, respectively, tensile strength and dissolvability in hot water decreased from 20.2 N/cm² and 42.7% to about 12.5 N/cm² and 26.1%, respectively. Both the times of repeated thawing and the thawing temperature had a certain influence on the above‐mentioned pore characteristic parameters and physical properties. Copyright © 2001 John Wiley & Sons, Ltd.     

Simple and cheap microfluidic devices for the preparation of monodisperse emulsions

Droplet microfluidics, which can generate monodisperse droplets or bubbles in unlimited numbers, at high speed and with complex structures, have been extensively investigated in chemical and biological fields. However, most current methods for fabricating microfluidic devices, such as glass etching, soft lithography in polydimethylsiloxane (PDMS) or assembly of glass capillaries, are usually either expensive or complicated. Here we report the fabrication of simple and cheap microfluidic devices based on patterned coverslips and microscope glass slides. The advantages of our approach for fabricating microfluidic devices lie in a simple process, inexpensive processing equipment and economical laboratory supplies. The fabricated microfluidic devices feature a flexible design of microchannels, easy spatial patterning of surface wettability, and good chemical compatibility and optical properties. We demonstrate their utilities for generation of monodisperse single and double emulsions with highly controllable flexibility.     

Syntheses of complex mesoporous silicas using mixtures of nonionic block copolymer surfactants: understanding formation of different structures using solubility parameters

The use of block copolymer (BCP) nonionic surfactant mixtures (including Pluronic, Brij and Tetronic types) as templates for synthesizing porous silica materials of mixed pore sizes is explored here. These systems have important applications because combinations of pore sizes can allow rapid access of reactants (via large pores) whilst providing the very high surface area of small pores for higher reaction rates or size selectivity. Examples of the materials prepared here include pore size bimodal hexagonal p6mm channel structures and cubic Im3m cage structures. It is shown here that the chemical similarity, as indicated by the solubility parameter, of the surfactants is an important factor in determining the pore structure and size distribution (PSD) of the pores. Monomodal pore structures are usually obtained when the solubility parameters of the surfactants are similar and bimodal pore structures when the solubility parameters are reasonably different. When the interaction parameter is very high disordered porous systems are formed. Ternary co-surfactant systems, e.g. P123-25R4-P65, can also yield highly ordered bimodal mesoporous silica with a hexagonal structure.     

Substituent effect on the molecular stability, group interaction, detonation performance, and thermolysis mechanism of nitroamino-substituted cyclopentanes and cyclohexanes

Density functional theory (DFT) method has been employed to study the effect of nitroamino group as a substituent in cyclopentane and cyclohexane, which usually construct the polycyclic or caged nitra-mines. Molecular structures were investigated at the B3LYP/6-31G** level, and isodesmic reactions were designed for calculating the group interactions. The results show that the group interactions ac-cord with the group additivity, increasing with the increasing number of nitroamino groups. The dis-tance between substituents influences the interactions. Detonation performances were evaluated by the Kamlet-Jacobs equations based on the predicted densities and heats of formation, while thermal stability and pyrolysis mechanism were studied by the computations of bond dissociation energy (BDE). It is found that the contributions of nitroamino groups to the detonation heat, detonation velocity, detonation pressure, and stability all deviate from the group additivity. Only 3a, 3b, and 9a-9c may be novel potential candidates of high energy density materials (HEDMs) according to the quantitative cri-teria of HEDM (ρ≈ 1.9 g/cm3, D ≈ 9.0 km/s, P ≈ 40.0 GPa). Stability decreases with the increasing number of N-NO2 groups, and homolysis of N-NO2 bond is the initial step in the thermolysis of the title com-pounds. Coupled with the demand of thermal stability (BDE > 20 kcal/mol), only 1,2,4-trinitrotriazacy-clohexane and 1,2,4,5-tetranitrotetraazacyclohexane are suggested as feasible energetic materials. These results may provide basic information for the molecular design of HEDMs.     

Superhydrophobic polyimide films with a hierarchical topography: combined replica molding and layer-by-layer assembly

Artificial superhydrophobic surfaces with a hierarchical topography were fabricated by using layer-by-layer assembly of polyelectrolytes and silica nanoparticles on microsphere-patterned polyimide precursor substrates followed with thermal and fluoroalkylsilane treatment. In this special hierarchical topography, micrometer-scale structures were provided by replica molding of polyamic acid using two-dimensional arrays of polystyrene latex spheres as templates, and nanosized silica particles were then assembled on these microspheres to construct finer structures at the nanoscale. Heat treatment was conducted to induce chemical cross-linking between polyelectrolytes and simultaneously convert polyamic acid to polyimide. After surface modification with fluoroalkylsilane, the as-prepared highly hydrophilic surface was endowed with superhydrophobicity due to the bioinspired combination of low surface energy materials and hierarchical surface structures. A superhydrophobic surface with a static water contact angle of 160 degrees and sliding angle of less than 10 degrees was obtained. Notably, the polyimide microspheres were integrated with the substrate and were mechanically stable. In addition, the chemical and mechanical stability of the polyelectrolyte/silica nanoparticle multilayers could be increased by heat-induced cross-linking between polyelectrolytes to form nylon-like films, as well as the formation of interfacial chemical bonds.     

Poly(p-phenylene ethynylene)s with facially amphiphilic pendant groups: solvatochromism and supramolecular assemblies

Novel functionalized poly(p-phenylene ethynylene)s (PPEs) bearing facially amphiphilic cholic and deoxycholic acid units are synthesized by a Pd-catalyzed Sonogashira cross-coupling reaction. Some interesting properties, particularly their optical and self-assembly characteristics, are unraveled. The PPEs that carry bile acid substituents exhibit remarkable solvatochromism in a wide range of solvent systems, and judicious choice of the solvents can adjust the size and morphology of the formed nanoscale supramolecular aggregates. The incorporation of these naturally occurring building blocks can also impart biocompatibility to the conjugated system and stimulate the growth of living cells.