对位叠式循环方波伏安法：Ⅰ.简单可逆电极体系

本文提出叠式循环方波伏安法和对位叠式循环方波伏安法，对简单可逆电极体系的理论作了推导和验证，经对各种电流的比较，发位叠式循环方波伏安法有较多的优点。较之其它方波伏安法灵敏。     

乳状液法制备ZnS纳米粒子

乳状液法制备ＺｎＳ纳米粒子黄宵滨马季铭＊程虎民赵振国齐利民（北京大学化学系北京１００８７１）关键词硫化锌，纳米粒子，乳状液，混合乳化剂１９９６－０５－２０收稿，１９９６－０９－０４修回国家自然科学基金资助项目近年来，利用反胶束或Ｗ／Ｏ微乳制备超细粒子...     

哈克流变仪上模拟ε－己内酰胺反应挤出的试验研究

高温条件下用哈克流变仪进行ε－己内酰胺聚合的模拟性试验，对尼龙６试样进行了常规性能测定；分析讨论了有关工艺参数对己内酰胺阴离子开环聚合的影响，获得了一些可供工程应用的参考数据，为进一步在双螺杆挤出机中进行尼龙６的反应挤出研究提供必要的依据。     

用反应挤出法制备尼龙6塑料

利用双螺杆挤出机进行了尼龙６阴离子开环聚合反应的研究，通过改变引发剂及活化剂的浓度、螺杆转速、机筒的温度分布以及螺杆元件构型的排布等，研究这些工艺参数对尼龙６反应挤出产物性能的影响。结果表明，反应挤出的尼龙６综合机械性能比水解缩聚法生产，且具有较高的性能价格比。     

表面活性剂和聚乙烯吡咯烷酮在ZrO2上的吸附对其悬浮体稳定性的影响

研究了水溶液中十二烷基苯磺酸钠（ＳＤＢＳ）、溴代十四烷基吡啶（ＴＰＢ）和聚乙烯吡咯烷酮（ＰＶＰ）在ＺｒＯ２上的吸附及对ＺｒＯ２水悬浮体稳定性的影响。结果表明：ｐＨ＝２．４时ＳＤＢＳ在ＺｒＯ２上的吸附等湿线为ＬＳ型，ｐＨ＝７．０时ＴＰＢ的吸附等温线为Ｓ型，吸附等温线与ＺｒＯ２粒子ζ电势变化同线有大体一致的关系。在最大吸附量时ＺｒＯ２粒子ζ电势较大，且吸附的表面活性剂离子形成大部分亲水基朝向水相的表面     

Color-Tunable Dual-Mode Organic Afterglow from Classical Aggregation-Caused Quenching Compounds for White-Light-Manipulated Anti-Counterfeiting

Color-tunable dual-mode organic afterglow excited by ultraviolet (UV) and white light was achieved from classical aggregation-caused quenching compounds for the first time. Specifically, two luminescent systems, which could produce significant organic afterglow composed of persistent thermally activated delayed fluorescence and ultralong organic phosphorescence under ambient conditions, were constructed by doping fluorescein sodium and calcein sodium into aluminum sulfate. Their lifetimes surpassed 600 ms, and the dopant concentrations were as low as 5×10⁻⁶ wt %. Moreover, the persistent luminescence colors of the materials could be tuned from blue to green and then to yellow by simply varying the concentrations of guest compounds or the temperature in the range of 260–340 K. Inspired by these exciting results, the afterglow materials were used for UV- and white-light-manipulated anti-counterfeiting and preparation of elastomers with different colors of persistent luminescence.     

Asymmetric Thermally Activated Delayed Fluorescence Materials Rendering High-performance OLEDs Through both Thermal Evaporation and Solution-processing

Exploring high-efficiency thermally activated delayed fluorescence(TADF) materials is of great importance regarding to organic light-emitting diode(OLED). Herein, we present a design strategy for developing asymmetric TADF materials based on a diphenyl sulfone-phenoxazine structure, resulting in efficient TADF emitters(CzPXZ and t-CzPXZ) with aggregation-induced emission properties, while t-CzPXZ is modified with tert-butyl groups. The two compounds exhibit high solid-state luminescence, efficient TADF, and significantly impressive device performances by both thermal evaporation and solution processing. For an instance, CzPXZ and t-CzPXZ enable the thermally-evaporated OLEDs with high external quantum efficiencies(EQEs) of over 20%. Meanwhile, t-CzPXZ allows the solution-processed device with a high EQE of 16.3% with low-efficiency roll-off, attributing to the enhanced molecular solubility and suppressed excitons quenching through tert-butyl modification on t-CzPXZ. The results reveal that the proposed asymmetric structure is a promising approach for developing high-efficiency TADF materials and OLEDs.     

Effect of Na2S treatment on the structural and electrochemical properties of Li1.2Mn0.54Ni0.13Co0.13O2 cathode material

Journal of Solid State Electrochemistry - The electrochemical performances of Li1.2Mn0.54Ni0.13Co0.13O2 cathode material are enhanced through hydrothermal approach using Na2S solution as a medium....