ZnSe纳米片晶的可控合成

以乙二胺四乙酸(EDTA)为稳定剂、丁胺(BA)为结构导向模板, 采用水热合成方法制备了尺寸和晶型可控的ZnSe纳米片晶; 利用XRD, TEM, SEM以及紫外-可见漫反射等手段对所得的产物进了表征, 结果表明, 通过改变水热温度和BA用量, 可以实现ZnSe纳米片晶的大小和物相的调控, 并初步分析了其形成过程.     

WO3 homojunction photoanode: Integrating the advantages of WO3 different facets for efficient water oxidation

The manipulation of the surface property of WO₃ photoanode is the main breakthrough direction to improve its solar water oxidation performance both in thermodynamics and kinetics.Here,we report a WO₃(002)/m-WO₃ homojunction film that is composed of an upper WO₃ layer with predominant(002)facet(WO₃(002))and a lower WO₃ layer with multi-crystal facets(m-WO₃)as a photoanode for solar water oxidation.Due to the synergistic effect of WO₃(002)layer and m-WO₃ layer,better water oxidation activity and stability are achieved on the WO₃(002)/m-WO₃ homojunction film relative to the m-WO₃ and WO₃(002)film.Specifically,the improved water oxidation performance on the WO₃(002)/m-WO₃ homojunction film is attributed to the followings.In thermodynamics,the band position differences between WO₃(002)layer and m-WO₃ layer lead to the formation of WO₃(002)/m-WO₃ homojunction,which has positive function of improving their charge separation and transfer.In kinetics,the upper WO₃(002)layer of the WO₃(002)/m-WO₃ film has superior activity in the adsorption and activation of water molecules,water oxidation on this homojunction film photoanode is inclined to follow the four-holes pathway,and the corrosion of photoanode from the H₂O₂ intermediate is restrained.The present work provides a new strategy to modify the WO₃ photoanodes for thermodynamically and kinetically efficient water oxidation.     

Theoretical Investigation of Detailed Thermodynamic Character of Possible Difunctional Adducts Model

1 INTRODUCTION Since cisplatin was recognized as an active sub- stance in the antitumor treatment in 1960s, many studies have been devoted to the exploitation of pla- tinum complexes, focusing on the influence of dif- ferent ligands and conformers on the cancer acti- vity[1~7]. Thousands of Pt complexes evaluated for antitumor activity adhered to the set of structure- activity relationship summarized by Cleare and Ho- eschele[1, 8], for instance, cispaltin, carboplatin and oxaliplatin pos…     

Polymerization of 2,4-hexadiyn-1,6-diol by chemical vapor deposition

2,4-Hexadiyn-1,6-diol (HDO) was polymerized on glass and silicon plates by chemical vapor deposition without transition metal catalysis to form homogeneous thin films. Structural properties of the films were investigated by FT-IR, UV-visible, Raman, x-ray diffraction, and XPS spectroscopic analyses. The structure of CVD-polymerized HDO (CVD-PHDO) films was different from that of metathesis polymerized HDO (metathesis-PHDO), showing a polyacene-based structure but no polyene structure with acetylenic side groups. © 1996 John Wiley & Sons, Inc.     

Effects of internals and distributors on the distribution and growth of bubbles in the conventional gas-solid fluidized bed

The effects of internals and gas distributors on the local dynamics of the bubbles in the conventional gas-solid fluidized bed were studied.Mesh-type internals with different opening areas(50%,70%and 90%)and different arrangements(two-layer and four-layer);and a sintered plate with a smaller pore size(1μm)and a perforated plate with a larger pore size as distributors were investigated.Differential pressure drops and local solids holdups were measured under various superficial gas velocities to compare the performances of the different types of internals and distributors.The instantaneous solids holdup signals from the optical fibre probe were used to further examine the local bubble dynamics in detail.Smaller bubbles were found,with the installation of internals or using the sintered plate,resulting in lower pressure drops and a higher bed expansion.Internals with reduced opening area or distributor with smaller pore size further leads to a higher changeover rate between the bubbles and dense phase,both axially and radially,and hence a better gas-solid contacting and an earlier transition to the turbulent flow regime of the bed.     

How the Aggregates Determine Bound Rubber Models in Silicone Rubber? A Contrast Matching Neutron Scattering Study

The correlation between aggregates and bound rubber structures in silicone rubbers(S(phr)) with various silica fractions(ΦSi) has been investigated by contrast matching small-angle neutron scattering(SANS), swelling kinetics, and low-field nuclear magnetic resonance(NMR).Mixed solvents with deuterated cyclohexane fractions of 4.9% and 53.7% were chosen to match the scattering length densities of the matrix(SMP(phr)) and the filler(SMS(phr)), respectively. All the data consistently suggest that:(i) There is a critical threshold ΦSic between 10 and 30 phr;below ΦSic, the isolated aggregates are dominant, while beyond ΦSic, some rubber fraction is trapped among the agglomerate;(ii) ΦSiindependent thicknesses around 7.5 nm(NMR) and 8.6 nm(SANS) suggest that the bound rubber formation is determined by inherent properties of the components, and the power-law around 4.2 suggests an exponential changed gradient density of the bound rubber;(iii) SMS(80) presents a bicontinuous bound rubber with three characteristic lengths of 41, 100, and 234 nm. The expanded correlation length, a 20 nm smaller aggregate sizes suggest that such existent bicontinuous network in dry samples with less ΦSi is kind of impacted by swelling. With the obtained bound rubber models, the reinforcing mechanism of filled silicone rubber is elucidated.     

An Improved Approach for Practical Synthesis of 5-Hydroxymethyl-2′-deoxycytidine (5hmdC) Phosphoramidite and Triphosphate

5-Hydroxymethyl-2′-deoxycytidine (5hmdC) phosphoramidite and triphosphate are important building blocks in 5hmdC-containing DNA synthesis for epigenetic studies. However, efficient and practical methods for the synthesis of these compounds are still limited. The current research provides an intensively improved synthetic method that enables the preparation of commercially available cyanoethyl-protected 5hmdC phosphoramidite with an overall yield of 39% on 5 g scale. On the basis of facile and efficient accesses to cyanoethyl protected-5hmdU and 5hmdC intermediates, two efficient synthetic routes for 5hmdC triphosphate were also developed.     

A new technique for carrying out real-time measurements of crystal growth rate

The growth rates of crystal interfaces have been measured by using a new technique — the laser diffraction metering technique. It is simple, visualized, fast and has high precision. This paper describes the basic principle, operation method and the precision of the technique.     

基于二氧化硅胶体晶体薄膜和反射干涉光谱的蛋白冠监测方法

生物分子与纳米材料作用形成的"蛋白冠"影响纳米材料的物理和化学性质,目前缺少有效的原位实时技术监测蛋白冠的形成过程.本研究基于二氧化硅胶体晶体薄膜和反射干涉光谱法,研究了三种代表性血液蛋白质在二氧化硅纳米粒子表面的蛋白冠形成过程,结果表明这三种蛋白具有不同的蛋白冠形成过程及参数;研究了人血清白蛋白在三种表面曲率的二氧化...     

功能模板导向合成介孔三氧化钨及其光电化学性能

以钨酸(H₂WO₄)为钨前驱体,十二烷胺(DDA)为模板剂,利用模板剂的结构导向功能,合成了比表面积为57.3 m²·g^-1的介孔三氧化钨(DDA-WO₃),是未用DDA制备的非介孔WO₃(H₂WO₄-WO₃)的2.35倍。X射线衍射(XRD)结果表明,400 ℃下煅烧的DDA-WO₃是具有单斜晶型结晶孔壁的无序介孔结构。此外,400~550 ℃下煅烧的DDA-WO₃的结晶度均高于同条件的H₂WO₄-WO₃。400 ℃下的DDA-WO₃/FTO(掺氟氧化锡)在1.0 V的Ag/AgCl偏压作用下,可以产生0.18 mA·cm^-2的饱和光电流,是H₂WO₄-WO₃/FTO(0.06 mA·cm^-2)的3倍。增强的光电化学(PEC)活性主要因为DDA-WO₃/FTO的大表面积降低了低结晶度对PEC性能的不利影响,成为影响PEC活性的主要因素。500 ℃煅烧导致了DDA-WO₃/FTO介孔结构的坍塌,但高的结晶度仍然保持其优越的PEC催化活性。