动态单滴法研究乳状液液膜的稳定性

乳状液液膜作为化学分离的一种手段,自七十年代发现以来已有了许多进展,但是如何将其工业化还有许多课题有待于进一步研究.目前,除了乳状液液膜的水静态渗透性质以外,对乳状液液膜的稳定性和溶胀性质的研究主要采用搅拌法.虽然得到较好的规律性,但是搅拌法具有乳状液滴粒径分布广的弱点,对于不同的搅拌方式及条件,乳状液液膜的有效面积不同,对液膜作用的机械强度不同,因此结果会有很大差别.我们自行设计的动态单滴法实验装置,可定量地研究乳状液液膜的溶胀、稳定性及水渗透性质.     

OCS分子的共振多光子电离光谱

OCS分子的真空紫外吸收光谱早有研究,但有关OCS分子的多光子电离光谱尚未见报导。我们利用可调脉冲激光器,研究了OCS分子的共振多光子电离光谱。首次观察到OCS分子在277—285nm波长范围内的多光子电离光谱。OCS由硫氰酸铵和硫酸反应制取,经多次低温蒸馏纯化。产物通过FT-IR红外光谱和     

Crystal structure and strong antiferromagnetic interaction of a terephthalate-bridged binuclear copper(II) Complex, [{Cu(dipn)}2(μ-TPHA)](ClO4)2 (dipn = N-(3-aminopropyl)-1,3-propanediamine)

Three binuclear copper(II) complexes bridged by three different bridging ligands: μ-TPHA (terephthalato), μ-PHTA (phthalato) and μ-TCB (tetracarboxylatobenzene) have been synthesized. The crystal structure of [{Cu(dipn)}₂(μ-TPHA)](ClO₄)₂ where dipn = N-(3-aminopropyl)-1,3-propanediamine was solved at room temperature. The [{Cudipn}₂(μ-TPHA)](ClO₄)₂ complex consists of a μ-terephthalato bridging binuclear copper(II) cationic unit and two non-coordinated perchlorate anions. The TPHA ligand bridges in a bismonodentate fashion. The environment of the copper(II) ion is a distorted plane-square-planar coordination sphere. The magnetic properties of the three complexes have been investigated in the 75–300 K range, and show that the geometry of the Cu^II atom is the important factor for magnetic interactions in the terephthalato bridging binuclear copper(II) complexes. This revised version was published online in June 2006 with corrections to the Cover Date.     

Sesquiterpenoids and Phenylpropane Derivatives from Sonchus uliginosus

Six new compounds were isolated from the whole plant of Sonchus uliginosus, including three eudesmane‐type sesquiterpenoids (1β,6α)‐1,6,14‐trihydroxyeudesm‐3‐en‐12‐oic acid γ‐lactone ( 1 ), (1β,6α)‐1,6,14‐trihydroxyeudesma‐3,11(13)‐dien‐12‐oic acid γ‐lactone ( 2 ), and (1β,6α)‐1,6‐dihydroxy‐14‐O‐[(4‐hydroxyphenyl)acetyl]eudesma‐3,11(13)‐dien‐12‐oic acid γ‐lactone ( 3 ), and three phenylpropane derivatives, 4‐hydroxy‐γ,3,5‐trimethoxybenzenepropanol ( 6 ), γ,3,4,5‐tetramethoxybenzenepropanol ( 7 ), and γ,3,4,5‐tetramethoxybenzenepropanol acetate ( 8 ), together with the two known compounds 4 and 5 . The new structures were elucidated by means of spectroscopic methods, such as IR, EI‐MS, HR‐ESI‐MS, 1D‐ and 2D‐NMR, and by comparison of the spectroscopic data with those reported for structurally related compounds.     

Near-infrared fluorimetric determination of nucleic acids by shifting the ion-association equilibrium between heptamethylene cyanine and Alcian blue 8GX

A new method based on near-infrared (near-IR) fluorescence recovery, employing a two-reagent system which is composed of an anionic heptamethylene cyanine (HMC) and a polycationic phthalocyanine dye, Alcian blue 8GX, is presented for the determination of nucleic acids. With a maximum excitation wavelength at 766 nm and a maximum emission wavelength at 796 nm, the fluorescence recovery is linear with the concentration of nucleic acids added. Factors including the acidity of the medium, the reaction time, the optimal ratio of the two reagents, as well as the influence of foreign substance were all investigated. Meanwhile, the mechanism of fluorescence recovery was also studied. Under the optimal conditions, the linear ranges of the calibration curves were 10-250 ng ml⁻¹ for calf thymus DNA (CT DNA) and 10-200 ng ml⁻¹ for yeast RNA. The detection limits were 6.8 ng ml⁻¹ for CT DNA and 6.3 ng ml⁻¹ for yeast RNA, respectively. The method has been applied to the analysis of practical samples and the recovery results were satisfactory.     

Specific oxidation of C-14 oxygenated 4(20),11-taxadienes by microbial transformation

Three C-14 oxygenated taxanes, 2α,5α,10β,14β-tetraacetoxytaxa-4(20),11-diene (1), 2α,5α,10β-triacetoxy-14β-(2-methylbutyryloxy)taxa-4(20),11-diene (2), and yunanaxane (3), major products of callus cultures of Taxus spp., were regio- and stereoselectively hydroxylated at the 7β position by a fungus, Absidia coerulea IFO 4011. Intriguingly, when 1 was co-administered with β-cyclodextrin and incubated with the fungus cell cultures, three other compounds 5α,9α,10β,13α-tetraacetoxytaxa-4(20),11-dien-14β-ol (7), 5α,9α,10β,13α-tetraacetoxytaxa-4(20),11-dien-1β-ol (8) and 5α,9α,10β,13α-tetraacetoxy-11(15→1) abeotaxa-4(20),11-dien-15-ol (9) were obtained.     

Synthesis, Crystal Structure, Properties and Thermoanalysis of Complexes of Cu（Ⅱ） and Ni（Ⅱ） with Taurine-5-chlorosalicylaldelyde Schiff Base

The reactions of transition metal salts with taurine 5‐chlorosalicylaldelyde Schiff base gave two complexes [Ni(TCSSB)(H₂O)₃].H₂O (1) and [Cu(TCSSB)(H₂O)₂]₂[Cu(TCSSB)₂].6H₂O (2) (TCSSB=taurine‐5‐chlorosalicylaldelyde Schiff base), which were characterized by elemental analysis and X‐ray diffraction analysis. The complex 1 crystallized in monoclinic system with space group P2 ₁/c, and a=1.4816(2) nm, b=1.3953(2) nm, c= 0.7466(1) nm, β= 100.499(3)°, V=1.5176(4) nm³, Z=4, and an infinite 3‐D network structure was formed by hydrogen bonds among sulfo group, crystal water and coordinated water. Complex 2 crystallized in triclinic system with space group P1 , with the cell parameters: a = 0.6413(2) nm, b= 1.4596(3) nm, c= 1.6188(4) nm, a= 102.473(5)°, β= 98.979(4)°, γ=101.739°, V=1.4165(6) nm³, Z=1. The coordination environment between Cu(1) and Cu(2) is different. Cu(1) is slightly distorted square pyramidal while Cu(2) is distorted square‐plane. The complex 1 is mononuclear while the complex 2 is made up of two coordinated subunits, namely [Cu(TCSSB)₂] and [CU(TCSSB)(H₂O)₂]₂. Besides that the TG‐DTG of the complex 1 was analyzed, the thermal decomposition reaction of the complex was studied under a non‐isothermal condition by TG‐DTG. The TG and DTG curves indicate that the complex was decomposed in three stages: .     

The mechanical properties and tribological behavior of epoxy resin composites modified by different shape nanofillers

Mechanical properties and tribological behavior of epoxy resin (EP) and EP nanocomposites containing different shape nanofillers, such as spherical silica (SiO₂), layered organo‐modified montmorillonite (oMMT) and oMMT‐SiO₂ composites, were investigated. The SiO₂‐oMMT composites were prepared by in situ deposition method and coupling agent modification, and transmission electron microscopy (TEM) analysis shows that spherical SiO₂ is self‐assembled on the surface of oMMT, which forms a novel layered‐spherical nanostructure. The mechanical properties test results show that oMMT obviously improves the strength of EP and SiO₂ enhances its toughness, but oMMT‐SiO₂ exhibits a synergistic effect on toughening and reinforcing EP simultaneously. A pin‐on‐disc rig was used to test friction and wear loss of pure EP and EP nanocomposites. The tribological test results prove that these nanofillers with different shapes play different roles for improving the wear resistance of EP nanocomposites. Morphologies of the worn surfaces were studied further by scanning electron microscopy (SEM) observations, and it was clarified that the EP and EP nanocomposites undergo similar wear mechanisms. Copyright © 2006 John Wiley & Sons, Ltd.