Fluorescent polymer cubosomes and hexosomes with aggregation-induced emission

Fluorescent polymer cubosomes and hexosomes with aggregation-induced emission (AIE) were prepared from amphiphilic block copolymers PEG-b-PTPEMA where the hydrophobic block PTPEMA was a polymethacrylate with tetraphenylethene (TPE) as the AIE side group. Four highly asymmetric block copolymers with hydrophilic block weight ratio f_PEG ≤ 20% were synthesized. Cubosomes and hexosomes with strong fluorescence emission were obtained by nanoprecipitation of polymers with f_PEG < 9% in dioxane/water and THF/water systems. Their ordered internal structures were studied by electron microscopy (cryo-EM, SEM and TEM) and the X-ray scattering technique (SAXS). To elucidate the formation mechanisms of these inverted colloids, other parameters influencing the morphologies, like the water content during self-assembly and the organic solvent composition, were also investigated. This study not only inspires people to design novel building blocks for the preparation of functional cubosomes and hexosomes, but also presents the first AIE fluorescent polymer cubosome and hexosome with potential applications in bio-related fields.

Fluorescent Im$\bar{3}$m cubosome and P6mm hexosome with aggregation-induced emission (AIE) were reported, which were formed by amphiphilic block copolymers PEG-b-PTPEMA. The length of hydrophobic block PTPEMA was adjusted to control morphology formation.     

Effects of Self—coiling of Organic Molecules on Intramolecular Exciplex Formation and Fluoresscence Quenching in DX—H2O Solvent System

Effects of self-coiling of organic molecules on intramolecular exciplex formation of compound I,in which the carbazole chromophore and terephthalic acid methylester acceptor group are linked by one (CH2)10 chain,and the decrease of the fluorescence intensities of compounds Ⅱ，Ⅲ，and Ⅳ,in which the carbazole chromophore and 3,5-dinitrobenzoate are connected by one aliphatic chain of (CH2)10 (Ⅱ），（CH2）12（Ⅲ）,or (CH2)4(Ⅳ）,have been studied in the dioxane (DX)-H2O binary system.The results show that self-coiling of organic molecules in DX-H2O facilitates intramolecular exciplex formation of I and induces the decrease of fluorescence intensities of Ⅱ,bacause of the proximity effect brought about by selfcoiling of organic molecules under hydrophobic-lipophilic interaction(HLI) between the excited carbazole chromophore and the acceptor.Since the similar effects are observed even when the concentration of the probes are less than their CAgCs(critical aggregate concentrations )in the DX-H2O mixture with the same φ values,formation of the intermolecular exciplex has been excluded.The effects are found to be strongly depended on φ values,indication that they are mainly driven by HLI.The properties of the acceptors can also affect the intramolecular exciplex formation.With terephthalic acid methylester moiety as the acceptor,the carbazole chromophore exhibits the fluorescence spectra of the exciplex,while with 3,5-dinitrobenzoate moiety as the acceptor,only the fluorescence spectra of excited carbazolyl chromophore are observed.     

Production ofL-glutamate oxidase andin situ monitoring of oxygen uptake in solid state fermentation ofstreptomyces sp. Nl

Effects of water content and carbon and nitrogen sources on the production ofL-glutamate oxidase (GOD) by solid state fermentation (SSF) ofStreptomyces sp. N₁ were investigated in a 250-mL shake flask. The results show that in the solid medium containing wheat bran 98% (w/w), KCl 0.2% (w/w), and MgCl₂ 0.2% (w/w), addition of 2.0-mL water per gram solid medium and 0.4% (w/w) (NH₄)₂SO₄ was the best for GOD production. In this work, we also developed a simple technique forin situ measuring oxygen uptake rate (OUR) and carbon dioxide evolution rate (CER) in SSF in a shake flask based on the principle of Warburg manometer. The method was successfully applied to determine OUR and CER values in SSF ofStreptomyces sp. N₁. The results indicate that the largest OUR value was detected about one or two days ahead of the highest GOD activity reached depending on the fermentation conditions, and the OUR may be used as anin situ indicator of GOD production in the SSF process.     

Synthesis and Crystal Structure of Two One—dimensional Chain Copper Complexes [Cu（TTA）2（4,4‘’—azpy）] and [Cu（TTA）2（3,3‘’—azpy）

Two copper complexes [Cu(TTA)₂(4,4′‐azpy)] (1) and [Cu‐(TTA)₂(3,3′‐azpy)] (2) (HTTA = 1,1,1‐trifluoro‐3‐(2‐thenoyl)‐acetone, 4,4′‐azpy = 4,4′‐azobispyridine, 3,3′‐azpy = 3,3′‐azobispyridine) were synthesized and characterized. The crystal structures were determined by X‐ray diffraction analysis. The crystal 1 belongs to triclinic with space group P1 , a = 0.8515(2) nm, b = 0.9259(2) nm, c = 0.9468(2) nm, a = 66.126(9)°, β = 79.667(9)°, γ = 90.13(1)°, Z = 1, V = 0.6692(2) nm³, D_c = 3.425 g/cm³, γ = 2.113 mm^?1, F(000) = 694, R₁ = 0.0594, wR₂ = 0.1499. The crystal 2 belongs to monoclinic with space group P2₁/c, a = 1.0661(2) nm, b = 1.4296(3) ran, c = 1.0041(3) nm, β = 114.50(3)°, V = 1.3926(5) nm³, Z = 2, D_c = 1.646 g/ cm³, μ = 1.015 mm^?1, F(000) = 694, R₁, = 0.0535, wR₂ = 0.1113. In the crystals of complexes 1 and 2, the copper atoms have distorted octahedral symmetry. The two compounds possess very similar one‐dimensional linear chains linked through the rodlike 4,4′‐azpy ligands or 3,3′‐azpy ligands.     

Potential-energy surface for the electronic ground state of NH3 up to 20,000 cm-1 above equilibrium

Ab initio coupled cluster calculations with single and double substitutions and a perturbative treatment of connected triple excitations [CCSD(T)] with the augmented correlation-consistent polarized valence triple-zeta aug-cc-pVTZ basis at 51 816 geometries provide a six-dimensional potential-energy surface for the electronic ground state of NH3. At 3814 selected geometries, CBS+ energies are obtained by extrapolating the CCSD(T) results for the aug-cc-pVXZ(X=T,Q,5) basis sets to the complete basis set (CBS) limit and adding corrections for core-valence correlation and relativistic effects. CBS** ab initio energies are generated at 51,816 geometries by an empirical extrapolation of the CCSD(T)/aug-cc-pVTZ results to the CBS+ limit. They cover the energy region up to 20,000 cm-1 above equilibrium. Parametrized analytical functions are fitted through the ab initio points. For these analytical surfaces, vibrational term values and transition moments are calculated by means of a variational program employing a kinetic-energy operator expressed in the Eckart-Sayvetz frame. Comparisons against experiment are used to assess the quality of the generated potential-energy surfaces. A "spectroscopic" potential-energy surface of NH3 is determined by a slight empirical adjustment of the ab initio potential to the experimental vibrational term values. Variational calculations on this refined surface yield rms deviations from experiment of 0.8 cm-1 for 24 inversion splittings and 0.4 (3.0) cm-1 for 34 (51) vibrational term values up to 6100 (10,300) cm-1.     

Fast protein analysis enabled by high-temperature hydrolysis

While the bottom-up protein analysis serves as a mainstream method for biological studies, its efficiency is limited by the time-consuming process for enzymatic digestion or hydrolysis as well as the post-digestion treatment prior to mass spectrometry analysis. In this work, we developed an enzyme-free microreaction system for fast and selective hydrolysis of proteins, and a direct analysis of the protein digests was achieved by nanoESI (electrospray ionization) mass spectrometry. Using the microreactor, proteins in aqueous solution could be selectively hydrolyzed at the aspartyl sites within 2 min at high temperatures (∼150 °C). Being free of salts, the protein digest solution could be directly analyzed using a mass spectrometer with nanoESI without further purification or post-digestion treatment. This method has been validated for the analysis of a variety of proteins with molecular weights ranging from 8.5 to 67 kDa. With introduction of a reducing agent into the protein solutions, fast cleavage of disulfide bonds was also achieved along with high-temperature hydrolysis, allowing for fast analysis of large proteins such as bovine serum albumin. The high-temperature microreaction system was also used with a miniature mass spectrometer for the determination of highly specific peptides from Mycobacterium tuberculosis antigens, showing its potential for point-of-care analysis of protein biomarkers.

A high-temperature microreaction system is developed for fast and selective hydrolysis of proteins, enabling direct analysis of protein biomarkers by mass spectrometry.     

Effect of PEG on the crystallization of PPDO/PEG blends

A new biodegradable polymer system, poly(p-dioxanone) (PPDO)/poly(ethylene glycol) (PEG) blend was prepared by a solvent casting method using chloroform as a co-solvent. The PPDO/PEG blends have different weight ratios of 95/5, 90/10, 80/20 and 70/30. Crystallization of homopolymers and blends were investigated by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD). When 5% of PEG was blended, the crystallization exothermal peaks (T_c) of PPDO increased sharply and the crystallization exothermal peaks (T_c) of PEG decreased slightly compared with the homopolymers. The crystallization rates of both components increased, and caused greater relative crystallization degree (X_t%). But when the content of PEG was more than 5%, the crystalline behaviors of blends had no more significant changes accordingly. The melting points of each sample varied little over the entire composition range in this study. The nonisothermal crystallization of PPDO homopolymer and blend (PPDO/PEG = 70/30) were also studied by DSC. The crystallization began at a higher temperature when the cooling rates were slower. The nonisothermal crystallization kinetics of blends was analyzed by Ozawa equation. The results showed that the Ozawa equation failed to describe the whole crystallization of the blend, but Mo equation could depict the nonisothermal crystallization perfectly.     

Investigation of the interaction between acridine orange and bovine serum albumin

The results from the measurement of the fluorescence spectrum showing the binding characteristics of acridine orange (AO) and bovine serum albumin (BSA) are reported. It was found that the equilibrium constant k=4848.64 l mol⁻¹, and the number of binding sites n=0.82. Based on the mechanism of the Forster energy transference, the transfer efficiency of energy and distance between the acceptor AO and BSA were found. The interaction between AO and BSA have been verified as consistent with the static quenching procedure and the quenching mechanism is related to the energy transfer.     

A MORPHOLOGICAL STUDY OF POLY（DIVINYLBENZENE-co-ACRYLIC ACID） IN CROSSLINKING PRECIPITATION POLYMERIZATION

Divinylbenzene-80 （DVB-80） and polar monomer acrylic acid （AA） having hydrogen bonding at a total monomer loading of 5 vol% were precipitated-copolymerized in a variety of organic solvents with 2,2＇-azobis（isobutyronitrile） （AIBN） as initiator. The experiments were investigated from a two-dimensional matrix, i.e., the actual crosslinking degree of DVB varying from 0 to 80% and the solvent composition varying from 0 to 100% of toluene mixture with acetonitrile, when the mixture of acetonitrile and toluene was used as the reaction solvent. Under various reaction conditions, six distinct morphologies including soluble polymers, swellable microgels, coagulum, irregular microparticles, and nano-/micrometer microspheres were formed and the structures of these polymer architectures were described. A morphological map was utilized to discuss the effects of both crosslinking degree of DVB and composition of solvent on the transitions between morphology domains. The results demonstrated that the microspheres are formed by an internal contraction due to the marginal solvency of the continuous phase and the crosslinking of the polymer network through the covalent bonding from DVB as well as the interchain hydrogen-bonding between the carboxylic acid units.     

C60大量、快速分离和电喷雾电离质谱检测

本文用配合沉淀和活性炭吸附相结合的方法，从高级富勒烯含量较高的混合物中，大量、快速分离Ｃ６０，并用电喷雾电离质谱对分离产物进行检测