The depth spectrums of constacyclic codes over finite chain rings

In light of the generator polynomials of constacyclic codes over finite chain rings, the depth spectrum of constacyclic codes can be determined if (n,p)=1$(n,p)=1$.     

Uncertain multiobjective traveling salesman problem

Traveling salesman problem is a fundamental combinatorial optimization model studied in the operations research community for nearly half a century, yet there is surprisingly little literature that addresses uncertainty and multiple objectives in it. A novel TSP variation, called uncertain multiobjective TSP (UMTSP) with uncertain variables on the arc, is proposed in this paper on the basis of uncertainty theory, and a new solution approach named uncertain approach is applied to obtain Pareto efficient route in UMTSP. Considering the uncertain and combinatorial nature of UMTSP, a new ABC algorithm inserted with reverse operator, crossover operator and mutation operator is designed to this problem, which outperforms other algorithms through the performance comparison on three benchmark TSPs. Finally, a new benchmark UMTSP case study is presented to illustrate the construction and solution of UMTSP, which shows that the optimal route in deterministic TSP can be a poor route in UMTSP.     

Characterization of Cr‐doped Sb2Te3 films and their application to phase‐change memory

Phase‐change memory (PCM) is regarded as one of the most promising candidates for the next‐generation nonvolatile memory. Its storage medium, phase‐change material, has attracted continuous exploration. Along the traditional GeTe–Sb₂Te₃ tie line, the binary compound Sb₂Te₃ is a high‐speed phase‐change material matrix. However, the low crystallization temperature prevents its practical application in PCM. Here, Cr is doped into Sb₂Te₃, called Cr–Sb₂Te₃ (CST), to improve the thermal stability. We find that, with increase of the Cr concentration, grains are obviously refined. However, all the CST films exhibit a single hexagonal phase as Sb₂Te₃ without phase separation. Also, the Cr helps to inhibit oxidation of Sb atoms. For the selected film CST_10.5, the resistance ratio between amorphous and crystalline states is more than two orders of magnitude; the temperature for 10‐year data retention is 120.8 °C, which indicates better thermal stability than GST and pure Sb₂Te₃. PCM cells based on CST_10.5 present small threshold current/voltage (4 μA/0.67 V). In addition, the cell can be operated by a low SET/RESET voltage pulse (1.1 V/2.4 V) with 50 ns width. Thus, Cr–Sb₂Te₃ with suitable composition is a promising novel phase‐change material used for PCM with high speed and good thermal stability performances. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Spontaneous Ga incorporation in ZnO nanowires epitaxially grown on GaN substrate

Surface‐diffusion‐induced spontaneous Ga incorporation process is demonstrated in ZnO nanowires grown on GaN substrate. Crucially, contrasting distributions of Ga atoms in axial and radial directions are experimentally observed. Ga atoms uniformly distribute along the ～10 μm long ZnO nanowire and show a rapidly gradient distribution in the radial direction, which is attributed substantially to the difference between surface and volume diffusion. The understanding on the incorporation process can potentially modulate doping and properties in semiconductor nanomaterials.

     

LLRF超导腔体控制系统的测试

中国科学院近代物理研究所自主研发的ADS注入器Ⅱ第一代高频低电平(LLRF)控制系统,工作频率为162.5 MHz;LLRF系统是由基于I/Q采样的正交解调技术构成的全数字闭环反馈控制系统,其主要功能是实现超导腔腔体电压幅值稳定控制、相位稳定控制与腔体谐振频率控制;LLRF控制系统在液氦温区超导腔上进行了系统稳定度和性能的在线测试,根据实验数据计算得超导腔体电压幅度稳定度为±3.4‰,相位稳定度为±0.3°,腔体表面峰值电场(Epk)能长时间稳定在25.1 MV/m。通过实验测试,检验了LLRF控制系统的性能,并对测试过程中出现的问题进行了分析,为将来超导腔LLRF控制系统运行积累了经验。     

Principal direction-based Hough transform for line detection

A robust and fast line detection method based on Hough transform (HT) is proposed in this paper. Edge pixels are extracted based on the summation and ratio of principal curvatures. Probabilistic sampling on the edge pixels is applied to reduce the count of voting. Then a one-to-one voting strategy is applied by taking advantages of the information of principal direction. The principal direction is also conducive for the successive accurate line segment extraction. The experiments demonstrate that the proposed method shows better locating accuracy and computation efficiency compared with several significant variations of HT.     

Wide-band circular polarization-keeping reflection mediated by metasurface

In this paper,we show that circular polarization-keeping reflection can be achieved using reflective metasurfaces.The underlying physical mechanism of the polarization-keeping reflection is analyzed using a reflection matrix.A wideband circular polarization-keeping reflector is demonstrated using N-shaped resonators.Both the simulation and experiment results show that the polarization-keeping reflection can be achieved with a high efficiency larger than 98%over the frequency range from 9.2 GHz to 17.7 GHz for both incident left-and right-handed circularly polarized waves.Under oblique incidence,the bandwidth increases as the incident angle varies from 0°to 80°. Moreover,the co-polarization reflection is independent of the incident azimuth angles.     

The electrochemical Peltier heats of Fe(CN) 6 3− /Fe(CN) 6 4− system at 295.15 K

A specially designed thermo-electrochemical calorimeter was applied to measure the electrochemical Peltier heats (EPH) of Fe(CN) ₆ ^3?/4? system at 295.15 K. The curves of the electrode potential changes and temperature changes against time for Fe(CN) ₆ ^3?/4? couple with five groups of different concentrations were obtained under the condition of various constant-current polarizations. The EPH values for the considered electrode reaction are determined to be ?41.31, ?42.73, ?44.28, ?45.87, and ?46.65 kJ mol^?1 at the respective concentrations of 0.125, 0.175, 0.225, 0.275, and 0.300 mol dm^?3; and the EPH and the apparent enthalpy change corresponding to the infinite dilution to be ?37.42 and ?84.10 kJ mol^?1 at 295.15 K, respectively.     

Organoclays from alkaline-treated acid-activated clays

The cetyltrimethylammonium hydroxide (C16TMAOH) solution was proposed for the preparation of organoclays. Montmorillonite clay was acid activated at different acid/clay (a/c) (in mass) ratios, then treated with alkaline (sodium hydroxide) solution before being reacted with C16TMAOH solution. The acid activation caused a reduction in the number of cation exchange sites, and hence improved the exfoliation of the silicate sheets at higher pH values. The basal spacing increased significantly from 2.20 to 4.01 nm, and depended on the a/c ratios. The acid-activated clays with a/c ratios greater than 0.3 adsorbed significant amounts of C16TMA cations with a basal spacing of 4.01 nm compared with the non-acid-activated montmorillonite (2.51 nm). Meanwhile, the treatment of NaOH solution yielded clays with similar properties to that of the raw used clay. The XRF data, FT-IR, and ²⁹Si MAS-NMR techniques confirmed that the resulting amorphous silica during the acid activation was dissolved, and accompanied by a dramatical reduction in the surface areas. Similar amounts of C16TMA cations were adsorbed, i.e., close to 1 mmol g^?1, with a single basal spacing of 2.52 nm, independently of the treated acid-activated clays. The in-situ powder XRD studies revealed that an increase of the basal spacing to 4.20 nm was observed at intermediate temperatures ranging from 50 to 150 °C for organo-acid-activated clays with basal spacing of 4.01 nm, while a continuous decrease of the basal spacing was observed for organoclays with a basal spacing of 2.52 nm. At higher temperatures greater than 250 °C, the decomposition of the surfactant occurs, and the basal spacing decreases to a value of about 1.4 nm.