不同激发密度下CdS晶体的光致发光和受激发射

本文主要研究在77-111K温度范围内、不同激发密度的N2激光器的337.1nm谱线激发下,激子-激子(Ex-Ex)、激子-载流子(Ex-e)的相互作用和发射一个LO声子(Ex-1LO)、两个LO声子(Ex-2LO)的自由激子的辐射复合行为.并在77K温度下观测到由Ex-Ex发射产生的受激发射.     

Influence of preparation methods on structure and properties of PA6/PA66 blends: A comparison of melt‐mixing and in situ blending

The blends composed of polyamide 6 (PA6) and polyamide 66 (PA66) were obtained using two different preparation methods, one of which was the melt‐mixing through a twin‐screw extruder and the subsequent injection molding; and the other, the in situ blending through anionic polymerization of ε‐caprolactam in the presence of PA66. For the former, there existed a remarkable improvement in toughness but a drastic drop in strength and modulus; however, for the latter, a reverse but less significant trend of mechanical properties change appeared. Various characterizations were conducted, including the analyses of crystalline morphology, crystallographic form, and crystallization and melting behaviors using polarized optical microscopy (POM), wide‐angle X‐ray diffraction (WAXD), and differential scanning calorimetry (DSC), respectively; observation of morphology of fractured surface with scanning electron microscope (SEM); measurement of glass transition through dynamic mechanical analysis (DMA); and the intermolecular interaction as well as the interchange reaction between the two components by Fourier transform infrared spectrometry (FT‐IR) and ¹³C solution NMR. The presence and absence of interchange reaction was verified for the in situ and melt‐mixed blends, respectively. It is believed that the transreaction resulted in a drop in glass transition temperature (T_g) for the in situ blends, contrary to an increase of T_g with increasing PA66 content for the melt‐mixed ones. And the two kinds of fabrication methods led to significant differences in the crystallographic form, spherulite size and crystalline content and perfection as well. Accordingly, it is attempted to explain the reasons for the opposite trends of changes in the mechanical properties for these two blends. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 1176–1186, 2007     

Molecular dynamics simulation of entropy and surface tension for grain boundary of α-Fe

The grain boundary is an interface and the surface tension is one of its important thermodynamic properties. In this paper, the surface tension of the ∑9 grain boundary for α-Fe at various temperatures and pressures is calculated by means of Computer Molecular Dynamics (CMD). The results agree satisfactorily with the experimental data. It is shown that the contribution of entropy to surface tension of grain boundary can be ignored. The project supported by the National Natural Science Foundation of China and the Science Foundation of Chinese Academy of Sciences.     

热电材料研究进展

在介绍热电材料制冷工作原理，分析热电材料优值系数的基础上，介绍了300K以下热电材料的研究进展，分析了热电材料的制冷特点、现状和应用前景．     

Characterization of ceramic PVD thin films on AZ31 magnesium alloys

Ceramic thin films have been widely used to protect the metal substrate as coatings in the past years. In order to improve the poor corrosion resistance of AZ31 magnesium alloy, the study in this paper used the electron beam evaporation method to prepare ceramic PVD films on its surface with TiO₂ and Al₂O₃ as donors, respectively. Atomic force microscopy (AFM), scanning electron microscope (SEM), energy dispersive X-ray spectrometer (EDS), Auger electron spectroscopy (AES) and X-ray diffraction (XRD) were used to investigate the surface morphology, composition and microstructure of the thin films. Both films deposited on AZ31 took on compact top surface morphologies and grew as amorphous structures on substrate. AES test not only showed that films compositions deviated the standard stoichiometric ratios, but also found that element Mg diffused into films and existed as magnesium oxide in the TiO_x film as well as the AlO_x film. In the electrochemical corrosion test, the AlO_x coating on AZ31 exhibited the largest electrochemical impedance in a 3.5% NaCl solution. But it did not show better corrosion resistance than others for the poorer adhesion. Even if its thickness was small, the TiO_x coating on AZ31 exhibited the best corrosion resistance in this study. According to the observation and analysis, the damage of these films on AZ31 in aggressive solutions was mainly due to the existence of pores, microcracks, vacancies and poor adhesion between coating and substrate.     

LD端抽运平直腔Nd:YVO4固态激光器的输出功率特性研究

对LD端抽运平直腔Nd:YVO₄固态激光器输出功率特性受激光器内在诸因素(热透镜效应、腔长、激活孔径等)的制约关系进行了研究.并用传播圆-变换圆图解分析方法给出了合理的解释，同时，对进一步提高其输出功率特性指出了方向. 关键词： 固体激光器 热透镜 变换圆 平直腔     

Generalized KKM Type Theorems in FC-Spaces with Applications (I)

The class KKM(X,Y) (resp., s-KKM(X,Y,Z)) of set-valued mappings with KKM (resp., s-KKM) property is introduced in FC-spaces without any convexity structure. Some generalized KKM (resp., s-KKM) type theorems are proved in FC-spaces under much weak assumptions. As applications, some new section theorems and coincidence theorems are established in FC-spaces. These theorems generalize many known results in literature. The further applications of these results will be given in a follow-up paper.     

微纳米加工技术及其应用综述

材料与结构在微纳米尺度展现了许多不同于宏观尺度的新特征，纳米技术已经成为当前科学研究与工业开发的热门领域之一。微小型化依赖于微纳米尺度的功能结构与器件，实现功能结构微纳米化的基础是先进的微纳米加上技术，文章对微纳米加上技术做了一个综合的介绍，简要说明了微纳米加工技术与传统加工技术的区别，在微纳米加工技术的应用方面提出了一些合理选择加工技术的原则，并对当前微纳米加工技术面临的挑战和今后发展的趋势作了预测。     

乌鲁木齐市商业中心的等级体系及合理布局的探讨

本文利用85年5—6月间对乌鲁木齐市主要商业区及部分中、小商业区的实地调查资料,对乌市商业中心等级系统进行了定性和定量的分级分类,将全市商业中心划分为五个等级,八组商业中心,对已形成的商业中心分布现状进行了初步探讨,并对今后商业网点的合理布局提出了建议。