Trigoxyphins O–T,six new heterodimers from Trigonostemon xyphophylloides

Phytochemical study of the twigs of Trigonostemon xyphophylloides led to the isolation of six new heterodimers, trigoxyphins O (1) and R–T (4–6) comprising of two different degraded diterpenoids, and trigoxyphins P (2) and Q (3) comprising a degraded diterpenoid and a phenylpropanoid, together with a known homodimer, neoboutomannin (7). The structures and relative configurations were elucidated on the basis of extensive spectroscopic analysis, including 1D and 2D NMR experiments. Compounds 1–6 were evaluated for their cytotoxicity against four human tumour cell lines by MTT assay.     

Development of a rapid method for the simultaneous separation and determination of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol and its N- and O-glucuronides in human urine by liquid chromatography–tandem mass spectrometry

Determination of the tobacco-specific nitrosamine metabolite 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL) and its N- and O-glucuronides (NNAL-N-Gluc and NNAL-O-Gluc) is important for toxicology analysis of tobacco smoke induced carcinogenicity and the understanding of detoxification mechanisms of the carcinogenic nitrosamine in humans. But previously reported indirect measurement methods involving enzymolysis and base treatment steps were tedious and time-consuming. In this work, a direct measurement method for simultaneous determination of urinary NNAL, NNAL-N-Gluc and NNAL-O-Gluc by liquid chromatography–tandem mass spectrometry (LC–MS/MS) in a single run was developed for the first time without the need to perform enzymatic or base hydrolysis. Urine samples were purified using dichloromethane and further extracted by solid-phase extraction. Then they were analyzed by LC–MS/MS operated in electrospray positive ionization mode. Chromatographic separation was achieved on a Phenomenex Kinetex PFP column within 6 min. The proposed method was validated and the results demonstrated that the method can produce satisfactory recoveries and reproducibility for the analytes. The applicability of this newly developed method was investigated for the simultaneous analysis of the three metabolites in smokers’ urine and the obtained results were comparable to those detected using the conventional enzymolysis method.     

Construction of microscale structures in enclosed microfluidic networks by using a magnetic beads based method

A large number of microscale structures have been used to elaborate flowing control or complex biological and chemical reaction on microfluidic chips. However, it is still inconvenient to fabricate microstructures with different heights (or depths) on the same substrate. These kinds of microstructures can be fabricated by using the photolithography and wet-etching method step by step, but involves time-consuming design and fabrication process, as well as complicated alignment of different masters. In addition, few existing methods can be used to perform fabrication within enclosed microfluidic networks. It is also difficult to change or remove existing microstructures within these networks. In this study, a magnetic-beads-based approach is presented to build microstructures in enclosed microfluidic networks. Electromagnetic field generated by microfabricated conducting wires (coils) is used to manipulate and trap magnetic beads on the bottom surface of a microchannel. These trapped beads are accumulated to form a microscale pile with desired shape, which can adjust liquid flow, dock cells, modify surface, and do some other things as those fabricated microstructures. Once the electromagnetic field is changed, trapped beads may form new shapes or be removed by a liquid flow. Besides being used in microfabrication, this magnetic-beads-based method can be used for novel microfluidic manipulation. It has been validated by forming microscale dam structure for cell docking and modified surface for cell patterning, as well as guiding the growth of neurons.     

Molecule-binding dependent assembly of split aptamer and γ-cyclodextrin: A sensitive excimer signaling approach for aptamer biosensors

A highly sensitive and selective fluorescence aptamer biosensors for the determination of adenosine triphosphate (ATP) was developed. Binding of a target with splitting aptamers labeled with pyrene molecules form stable pyrene dimer in the γ-cyclodextrin (γ-CD) cavity, yielding a strong excimer emission. We have found that inclusion of pyrene dimer in γ-cyclodextrin cavity not only exhibits additive increases in quantum yield and emission lifetime of the excimer, but also facilitates target-induced fusion of the splitting aptamers to form the aptamer/target complex. As proof-of-principle, the approach was applied to fluorescence detection of adenosine triphosphate. With an anti-ATP aptamer, the approach exhibits excimer fluorescence response toward ATP with a maximum signal-to-background ratio of 32.1 and remarkably low detection limit of 80 nM ATP in buffer solution. Moreover, due to the additive fluorescence lifetime of excimer induced by γ-cyclodextrin, time-resolved measurements could be conveniently used to detect as low as 0.5 μM ATP in blood serum quantitatively.     

Development of a sensitive and reliable high performance liquid chromatography method with fluorescence detection for high-throughput analysis of multi-class mycotoxins in Coix seed

As an edible and medicinal plant, Coix seed is readily contaminated by more than one group of mycotoxins resulting in potential risk to human health. A reliable and sensitive method has been developed to determine seven mycotoxins (aflatoxins B₁, B₂, G₁, G₂, zearalenone, α-zearalenol, and β-zearalenol) simultaneously in 10 batches of Coix seed marketed in China. The method is based on a rapid ultrasound-assisted solid–liquid extraction (USLE) using methanol/water (80/20) followed by immunoaffinity column (IAC) clean-up, on-line photochemical derivatization (PCD), and high performance liquid chromatography coupled with fluorescence detection (HPLC-FLD). Careful optimization of extraction, clean-up, separation and detection conditions was accomplished to increase sample throughput and to attain rapid separation and sensitive detection. Method validation was performed by analyzing samples spiked at three different concentrations for the seven mycotoxins. Recoveries were from 73.5% to 107.3%, with relative standard deviations (RSDs) lower than 7.7%. The intra- and inter-day precisions, expressed as RSDs, were lower than 4% for all studied analytes. Limits of detection and quantification ranged from 0.01 to 50.2 μg kg⁻¹, and from 0.04 to 125.5 μg kg⁻¹, respectively, which were below the tolerance levels for mycotoxins set by the European Union. Samples that tested positive were further analyzed by HPLC tandem electrospray ionization mass spectrometry for confirmatory purposes. This is the first application of USLE-IAC-HPLC-PCD-FLD for detecting the occurrence of multi-class mycotoxins in Coix seed.     

氢化物发生-原子荧光光谱法同时测定水中砷和锑

建立在硝酸介质中用氢化物发生-原子荧光光谱法同时测定水中砷和锑的方法。优化了仪器工作条件、酸度、硼氢化钾及还原剂浓度。砷、锑的线性范围为0～10．0μg／L;检出限分别为0．02,0．01μg／L;测定结果的相对标准偏差分别为1．77％～3．72％,2．95％～4．87％（n=6）;加标回收率分别为98％106％,96％105％。该法操作简便,灵敏度高,快速,便于推广,适用于水中砷和锑的同时测定。     

新型磺酸盐型Gemini表面活性剂的合成及其与聚合物相互作用

以溴代正烷烃、乙二胺、1,3-丙磺内酯合成了一系列新型磺酸盐型Gemini表面活性剂(SGS-8、SGS-10、SGS-12、SGS-14);采用IR、1H NMR及元素分析等手段对合成产物进行结构表征,并研究了其表面活性,采用等温滴定微量热技术、表面张力法和稳态荧光光谱法研究了SGS-12与聚丙烯酰胺(PAM)的相互作用规律及热力学参数。结果表明,合成的产物纯度较高,具有较低的cmc值和较好的表面活性;SGS-12/PAM混合体系的表面张力曲线和芘探针在体系中微极性的变化表明,二者发生相互作用且形成混合胶束;SGS-12与PAM结合是一个由焓驱动的自发过程,△H和△S均小于0,表明相互作用力以氢键和范德华力为主,合成产物在聚丙烯酰胺分子上的平均结合数为287。     

RP-HPLC法检测发酵液中赤霉素GA4,GA7的含量

建立了反相高效液相色谱法(RP-HPLC)测定发酵液中赤霉素GA4,GA7的方法。探讨了流动相缓冲盐与甲醇的比例、缓冲盐pH、温度、流速等对两种赤霉素分离的影响,结果表明在Kromasil C18(250 mm×4.6 mm,5μm)色谱柱下,以V(甲醇):V(pH3.0,0.05 mol/L KH2PO4)=60:40为流动相,柱温35℃,流速1.0 mL/min,检测波长228nm,进样量20μL,分离度良好。GA4,GA7标准品质量浓度分别在0.1~8.0 mg/mL,0.1~3.0 mg/mL范围内线性关系良好,线性回归方程为Y4=1.58878+7.06978X4,Y7=0.48281+7.12931X7;GA4,GA7检出限分别为19.6,14.3μg/mL,平均加标回收率分别为98.8%,99.9%,相对标准偏差RSD分别为1.5%,0.34%。