A novel synthesis of allyl and propargyl selenides in aqueous media promoted by indium

Allylic and propargyl bromides react smoothly with diorganyl diselenides in aqueous media to give allylic and propargyl selenides in moderate to good yields. The reaction need not be carried out in inert atmosphere. The speed is quicker than the same reactions in organic media.     

聚苯乙烯，聚甲基丙烯酸甲酯对聚氯乙烯／氯化聚乙烯共混体流变性的影响

PVC/CPE blend modified by rigid particles has good combined properties. In this paper, the effeCts of rigid particles (PMMA. PS. CaCO,) on the rheological behavior of PVC/ CPE systems were studied. The results showed that the apparent viscosity (aha) were decreased, extrusion surface smooth and Newtonian fluidity were slightly improved by filling a little amount of rigid ploymers (PS. PMMA) to PVC/CPE blends. The fluid activition energy (E,). Newtonian fluidity. extrusion surface smooth and ba of PVC/CPE blends were increased by filling CaCO₃ and die swelling ratio was decreased.The newtonian fluidity. En and ηa of PVC/CPE/CaCO₃ blends can be decreased by filling rigid polymers,and good extrusion surface smooth and low die swelling ratio unchanged.     

Superabsorbent hydrogel composites

A new cost‐effective approach to enhance gel strength of superabsorbent hydrogels was invented. Superabsorbent hydrogel composites (SHCs) were prepared through an optimized rapid solution polymerization of concentrated partially neutralized acrylic acid in the presence of a crosslinking agent under normal atmospheric conditions. Kaolin was used as an inorganic component in the polymerization process to strengthen the hydrogel products. FT‐IR spectroscopy was used to confirm grafting of acrylic chains on to the surface of kaolin particles. Morphology of the products was studied by scanning electron microscopy (SEM). Compared with the kaolin‐free hydrogel (control), kaolin caused a reduced equilibrium swelling and swelling rate as low as 17–31% and 19–29%, respectively. Kaolin, however, resulted in enhanced gel strength as high as 21–35% compared to the control. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to study thermal properties of the composites. The SHCs exhibited higher thermal stability than the control. Meanwhile, changes in certain thermal transitions reconfirmed the chemical interaction of the acrylic chain with kaolin. These thermostabilized strengthened superabsorbent hydrogels may be considered as good candidates for agricultural application to retain more water under soil pressure. Copyright © 2003 John Wiley & Sons, Ltd.     

Carbon‐based Nanosensors for Salicylate Determination in Pharmaceutical Preparations

Thiourea derivative‐based carbon paste electrode (TUD1‐CPE) was constructed as a potentiometric sensor for the determination of salicylate anion in pharmaceutical formulations, Aspocid® and Aspirin®. The optimized CPE contained 45.5 % graphite, 0.5 % reduced graphene oxide (rGO), 46.0 % nitrophenyl octyl ether (NPOE) plasticizer, 5.0 % TUD1 ionophore, and 3.0 % tridodecylmethyl ammonium chloride as additive. The incorporation of NPOE of high dielectric constant, and rGO in electrode caused better performance of the sensor; Nernstian response of 59.0 mV decade^?1 in the concentration range of 10^?1–10^?5 mole L^?1, a detection limit of 1×10^?5 mole L^?1 in a very short response time of 6 seconds. The prepared sensor showed high selectivity against similar anions (i. e. , benzoate, I^?, SCN^?). Selectivity was confirmed by calculating the formation constant (K_β) using sandwich membrane method, where K_β for TUD1‐salicylate is 10^0.43. Theoretical calculations at DFT‐B3LY/6‐31G** level of theory were performed to find interaction mechanism, Energies of HOMO and LUMO orbitals, non‐linear optical (NLO) properties (the electronic dipole moment (μ), first‐order hyperpolarizability (β), the hyper‐Rayleigh scattering (β_HRS) and the depolarization ratio (DR)), and other global properties; these calculations showed lower values of β and DR, higher value of β_HRS, and the shortest lengths of the four N?H bonds between TUD1 and salicylate which confirm their strong complexation and salicylate‐selectivity. Also, all the studied anion‐TUD1 exhibited relatively high NLO properties, and these results were considered as a preliminary study for investigating new types of NLO bearing materials. The sensors were applied successfully for the determination of salicylate anion in Aspocid® and Aspirin®.     

Cycloarsanes (AsCF3)n (n = 4, 5) – Precursors for the Highly Reactive Diarsene F3CAs=AsCF3

Tetrakis(trifluoromethyl) cyclotetraarsane (F₃CAs)₄ ( 2 ) was used to repeat the UV initiated [4+2]‐cycloaddition reaction of the diarsene F₃CAs=AsCF₃ ( 1 ) with cyclohexa‐1,3‐diene (CHD) and to isolate single crystals of the cycloadduct 4 for a X‐ray diffraction analysis. 4 crystallizes in the space group and contains the diarsene group in its E‐configuration. 2 was also applied for [2+2]‐cycloaddition reactions of 1 with tBuC≡P and MeC≡CNⁱPr₂, but in contrast to positive results with (F₃CP)₄ the products were too labile for isolation. However, 2 was successfully used at room temperature as precursor for coordinating 1 as π‐donor ligand to the Pd(PPh₃)₂ complex fragment yielding η²‐bis(trifluoromethyl)diarsene‐bis(triphenylphosphane)‐palladium(0) 5 , which was characterized by X‐ray diffraction of single crystals and by spectroscopic investigations (NMR, IR, MS). Attempts to prove the existence of the diarsene 1 , generated by different methods, by spectroscopic studies very probably failed due to its extreme reactivity, not allowing the necessary concentrations for detection. Quantum chemical calculations of the stability of 1 with respect to dimerization, the stability of the [2+2]‐cycloadduct with 1‐di(isopropyl)aminopropyne and the energy difference between 4 and the 2,3‐dimethyl‐1,3‐butadiene cycloadduct of 1 were performed to understand the considerable differences between 1 and the related diphosphene F₃CP=PCF₃.     

Computerized flow constant-current stripping analysis for some electroactive organic compounds: application to the determination of erythromycin in urine

The possibility of determining various electroactive organic compounds, e.g., erythromycin and riboflavin, by adsorptive preconcentration at constant potential on a mercury-coated carbon-fibre electrode in a flow system prior to stripping with a reductive constant current, is demonstrated. The advantages of measuring the electrode potential vs. time instead of current vs. electrode potential during stripping, the possibility of operating with non-deoxygenated solutions, the increased linear calibration range is in the multiple scanning mode, and the possibility of using the technique for detection in liquid chromatography, are discussed. An analytical procedure for the determination of erythromycin at the 10(-6)M level in urine after extraction with diethyl ether is described.     

Synthesis and Electrochemical Studies of Spinel LiNi1−xMnxVO4

Spinel compound LiNi_1−xMn_xVO₄ (0≤x≤0.4) had been prepared by using the moist chemical method. X-ray diffraction spectra showed that the lattice constant increased with x in the LiNi_1−xMn_xVO₄, XPS spectra indicating that Li1s had a chemical shift towards lesser binding energy, and manganese in LiNi_1−xMn_xVO₄ existing as the mixed valence of Mn²⁺ and Mn³⁺. The electrochemical charge and discharge testing at a current density of 0.1 mA/cm² between the potentials of 4.0 and 3.0 V vs Li/Li⁺ in 1 mol/dm³ LiPF₆/EC+DEC (1:1 by volume) at 25°C showed that LiNi_1−xMn_xVO₄ cell has a better rechargeability, but a lower cell voltage of 4.0 V vs Li/Li⁺ than that without the doping sample, and the capacity and the cycle efficiency of the Li/LiNi_1−xMn_xVO₄ cells increased with x in the LiNi_1−xMn_xVO₄.     

尼龙—6／丙烯酸接枝膜的结构与性能

应用ＩＲ确定了尼龙－６与丙烯酸接枝反应的接枝点位于尼龙大分子酰胺键的Ｎ原子上，用Ｘ射线衍射研究了接枝膜的结晶状况，探讨了接枝率对接枝膜的电阻、离子交换容量、强度等性能的影响．     

Highly efficient, one-step macrocyclizations assisted by the folding and preorganization of precursor oligomers

Highly efficient, one-step macrocyclizations leading to the formation of macrocyclic hexa(aramides) in high yields (69-82%) are described. The one-step macrocyclizations were facilitated by the preorganization or folding of the backbones of uncyclized precursors in the course of macrocyclization. The preorganization of backbones was achieved by the presence of localized three-centered hydrogen bonds that were adopted in the design of a class of closely related, backbone-rigidified foldamers. The macrocyclization involved reactions between diacid chloride 1 and diamine 2. The crude reaction mixtures and products were conveniently examined by mass spectrometric method (MALDI-TOF). Compared to most traditional one-step macrocyclizations that usually require high dilution conditions and often lead to very low overall yields of the desired products, cyclic hexamers 3 were obtained as the overwhelmingly major product under a variety of reaction conditions, suggesting the generality of this approach.     

Electrokinetic control of fluid flow in native poly(dimethylsiloxane) capillary electrophoresis devices

Capillary zone electrophoresis (CZE) devices fabricated in poly(dimethylsiloxane) (PDMS) require continuous voltage control of all intersecting channels in the fluidic network in order to avoid catastrophic leakage at the intersections. This contrasts with the behavior of similar flow channel designs fabricated in glass substrates. When the injection plugs are shaped by voltage control and leakage from side channels is controlled by the application of pushback voltages during separation, fluorescein samples give 64 200 theoretical plates (7000 V separation voltage, E = 1340 V/cm). Native PDMS devices exhibit stable retention times (+/- 8.6% RSD) over a period of five days when filled with water. Contact angles were unchanged (+/- 1.9% RSD) over a period of 16 weeks of dry storage, in contrast to the known behavior of plasma-oxidized PDMS surfaces. Electroosmotic flow (EOF) was observed in the direction of the cathode for the buffer systems studied (phosphate, pH 3-10.5), in the presence or absence of hydrophobic ions such as tetrabutylammonium or dodecyl sulfate. Electroosmotic mobilities of 1.49 x 10(-5) and 5.84 x 10(-4) cm2/Vs were observed on average at pH 3 and 10.5, respectively, the variation strongly suggesting that silica fillers in the polymer dominate the zeta potential of the material. Hydrophobic compounds such as dodecyl sulfate and BODIPY 493/503 adsorbed strongly to the PDMS, indicating the hydrophobicity of the channel walls is clearly problematic for CZE analysis of hydrophobic analytes. A method to stack multiple channel layers in PDMS is also described.