Traveling wave magnetophoresis for high resolution chip based separations

A new mode of magnetophoresis is described that is capable of separating micron-sized superparamagnetic beads from complex mixtures with high sensitivity to their size and magnetic moment. This separation technique employs a translating periodic potential energy landscape to transport magnetic beads horizontally across a substrate. The potential energy landscape is created by superimposing an external, rotating magnetic field on top of the local fixed magnetic field distribution near a periodic arrangement of micro-magnets. At low driving frequencies of the external field rotation, the beads become locked into the potential energy landscape and move at the same velocity as the traveling magnetic field wave. At frequencies above a critical threshold, defined by the bead's hydrodynamic drag and magnetic moment, the motion of a specific population of magnetic beads becomes uncoupled from the potential energy landscape and its magnetophoretic mobility is dramatically reduced. By exploiting this frequency dependence, highly efficient separation of magnetic beads has been achieved, based on fractional differences in bead diameter and/or their specific attachment to two microorganisms, i.e., B. globigii and S. cerevisiae.     

Mechanically Strong Janus Poly(N-isopropylacrylamide)/Graphene Oxide Hydrogels as Thermo-responsive Soft Robots

Simple preparation of stimuli-responsive hydrogels with good mechanical properties and mild stimuliresponsiveness is essential for their applications as smart soft robots.Mechanically strong Janus poly(Nisopropylacrylamide)/graphene oxide (PNIPAM/GO) nanocomposite hydrogels with stimuli-responsive bending behaviors are prepared through a simple one-step method by using molds made of a Teflon plate and a glass plate.Residual oxygen in the air bubbles on the Teflon plate surface affects the polymerization and hence the cross-linking density,leading to the different swelling/deswelling rates of the two sides of the gels.Therefore,the hydrogels exhibit bending/unbending behaviors upon heating/cooling in water.The incorporation of GO nanosheets dramatically enhances the mechanical properties of Janus hydrogels.Meanwhile,the photo-responsive property of the GO nanosheets also imparts the hydrogels with remotecontrollable deformation under IR irradiation.The application of the Janus PNIPAM/GO hydrogels as thermo-responsive grippers is demonstrated.     

An “<Emphasis Type="Italic">In Vivo</Emphasis> Self-assembly” Strategy for Constructing Superstructures for Biomedical Applications

The interfacing study of biopolymer and supramolecular chemistry enables a better understanding of fundamental biochemical processes and the creating of new high-performance biomaterials. In this review, we introduced an “in vivo self-assembly” strategy which means in situ construction of functional self-assembled superstructures in specific physiological or pathological conditions in cell, tissue or animal levels that exhibit diverse biomedical effects. By using this strategy, unexpected phenomena and insights, e.g, assembly/aggregation induced retention (AIR) effect have been demonstrated where the self-assembled nanostructures showed extraordinary enhanced accumulation and retention of therapeutics in targeted sites.     

Silver-catalyzed decarboxylative cross-coupling of α-keto acids with alkenes giving approach to chalcones

A silver-catalyzed decarboxylative cross-coupling of α-keto acids with alkenes is reported. The method, with a wide range of substrate tolerance and mild operational conditions, can produce various chalcone derivatives in moderate to high yields from easily available starting materials.     

Zn对Pt/SAPO-11催化剂物化及异构性能影响

通过浸渍法制备了Pt/SAPO-11催化剂, 分步浸渍法制备了Zn-Pt/SAPO-11双金属催化剂. 通过X射线衍射、低温氮物理吸附、氨程序升温脱附和吡啶吸附红外等手段对所得样品进行了表征. 实验结果表明, 助剂Zn的引入导致了催化剂的比表面积和孔容降低, B酸量减少而L酸量增加, 总酸量有所增加. 在300～380 ℃范围内对正庚烷的临氢异构化反应考察发现, 引入金属助剂Zn可以明显改变正庚烷的转化率, 而对C₇异构体的选择性影响不明显. 当Zn质量分数为0.2%, Pt质量分数为0.2%时, Zn-Pt/SAPO-11催化剂的正庚烷转化率及C₇异构体收率达到最大值; Zn含量继续增加时, 正庚烷转化率及C₇异构体收率均随之下降. 实验结果表明, 双功能催化剂中金属功能与酸性功能的匹配对正庚烷临氢异构化反应非常重要.     

三唑环修饰的苯并菲二羧酸酯和酰亚胺: 合成、液晶及凝胶性

在盘状液晶分子外围柔性链中引入功能不同的基团, 是设计和合成具有良好液晶性能化合物的常用策略. 本工作从苯并菲2,3-二甲酸和酸酐出发, 通过亲核取代和点击反应, 分别合成了两类三唑环修饰的苯并菲二羧酸酯和苯并菲酰亚胺化合物. 热重分析仪(TGA)测试表明, 新制备的主要中间产物与目标化合物失重为5%时的温度在274~389 ℃之间, 均表现出良好的热稳定性. 我们通过差示扫描量热法(DSC)、偏光显微镜(POM)和变温X射线衍射(XRD)实验对这些化合物的热力学行为和介晶性进行了研究. 除三唑环修饰的酯3a和3b无液晶性外, 主要中间产物(2和5)与三唑环修饰的酰亚胺产物(6a和6b)均有一个六方柱状液晶相. 此外, 制备的以三唑为桥联基团的酰亚胺二聚体10为室温液晶, 具有173 ℃的液晶范围. XRD证实了该二聚体中存在有序度不同的两种柱状液晶相(Col_h1和Col_h2). 另外, 由于三唑环的引入, 三唑环修饰的酯类和酰亚胺两类化合物在某些有机溶剂中都能形成有机凝胶. 其中, 二聚体10在1,2-二氯乙烷和1,4-二氧六环中表现出优异的凝胶能力, 其临界凝胶浓度(CGC)可低至1 mg/mL. 相比之下, 不含三唑环的中间产物2和5则不能形成凝胶, 表明三唑环之间的偶极-偶极作用和液晶刚性核π-π堆积的协同作用对于超分子凝胶的形成起着重要的作用. 因此, 同时表现出液晶和凝胶性质的三唑环修饰的苯并菲2,3-二酰亚胺分子具有成为一种多功能材料的潜在应用价值.     

Over 18% binary organic solar cells enabled by isomerization of non-fullerene acceptors with alkylthiophene side chains

Side-chain engineering has been demonstrated as an effective method for fine-tuning the optical, electrical, and morphological properties of organic semiconductors toward efficient organic solar cells (OSCs). In this work, three isomeric non-fullerene small molecule acceptors (SMAs), named BTP-4F-T2C8, BTP-4F-T2EH and BTP-4F-T3EH, with linear and branched alkyl chains substituted on the α or β positions of thiophene as the side chains, were synthesized and systematically investigated. The results demonstrate that the size and substitution position of alkyl side chains can greatly affect the electronic properties, molecular packing as well as crystallinity of the SMAs. After blending with donor polymer D18-Cl, the prominent device performance of 18.25% was achieved by the BTP-4F-T3EH-based solar cells, which is higher than those of the BTP-4F-T2EH-based (17.41%) and BTP-4F-T2C8-based (15.92%) ones. The enhanced performance of the BTP-4F-T3EH-based devices is attributed to its stronger crystallinity, higher electron mobility, suppressed biomolecular recombination, and the appropriate intermolecular interaction with the donor polymer. This work reveals that the side chain isomerization strategy can be a practical way in tuning the molecular packing and blend morphology for improving the performance of organic solar cells.