Aggregate manganese Schiff base moieties by terephthalate or acetate: dinuclear manganese and trinuclear mixed metal Mn2/Na complexes

A reaction system consisting of terephthalic acid, NaOH, inorganic Mn(II) or Mn(III) salt, and salicylidene alkylimine resulted in dinuclear manganese complexes (salpn)(2)Mn(2)(mu-phth)(CH(3)OH)(2) (1, salpn = N,N'-1,3-propylene-bis(salicylideneiminato); phth = terephthalate dianion), (salen)(2)Mn(2)(mu-phth)(CH(3)OH)(2) (2, salen = N,N'-ethylene-bis(salicylideneiminato)), (salen)(2)Mn(2)(mu-phth)(CH(3)OH)(H(2)O) (3), and (salen)(2)Mn(2)(mu-phth) (4), while the absence of NaOH in the reaction led to a mononuclear Mn complex (salph)Mn(CH(3)OH)(NO(3)) (5, salph = N,N'-1,2-phenylene-bis(salicylideneiminato)). In addition, a trinuclear mixed metal complex H[Mn(2)Na(salpn)(2)(mu-OAc)(2)(H(2)O)(2)](OAc)(2) (6) was obtained from the reaction system by using maleic acid instead of terephthalic acid. Five-coordinate Mn ions were found in 4 giving rise to an intermolecular interaction and constructing a one-dimensional linear structure. Antiferromagnetic exchange interactions were observed for 1-3, and a total ferromagnetic exchange of 4 was considered to stem from intermolecular magnetic coupling. (1)H NMR signals of phenolate ring and alkylene (or phenylene) backbone of the diamine are similar to those reported in the literature, and the phth protons are at -2.3 to -10.1 ppm. Studies on structure, bond valence sum analysis, and magnetic properties indicate the oxidation states of the Mn ions in 6 to be +3, which are also indicated by ESR spectra in dual mode. Ferromagnetic exchange interaction between the Mn(III) sites was observed with J = 1.74 cm(-1). A quasireversible redox pair at -0.29V/-0.12V has been assigned to the redox of Mn(2)(III)/Mn(III)Mn(II), implying the intactness of the complex backbone in solution.     

Effect of actin concentration on the structure of actin-containing liposomes

Liposomes encapsulating monomeric actin (G-actin) were produced via extrusion through 400 and 600 nm pore diameter polycarbonate membranes in low ionic strength buffer (G-buffer). After actin-containing liposomes were subjected to high ionic strength polymerization buffer (F-buffer), morphological changes in the structure of actin-containing liposomes were studied using asymmetric flow field-flow fractionation (AFFF) coupled with multiangle static light scattering (MASLS). The general shape of these liposomes was initially determined by fitting three form factors, which describe the angular distribution of scattered light from a spherical thin shell, thin disk, and thin rod, to the experimentally measured light scattering spectra to regress the dimensions of the liposomes corresponding to the proposed geometry. Light scattering spectra that yielded a best fit to the thin disk model were analyzed further and fit to the ellipsoidal of revolution form factor to regress both the major and minor axis dimensions. The results of this analysis showed that actin-containing liposomes extruded through 400 and 600 nm pore diameter membranes in F-buffer, at a low actin concentration (0.1 mg/mL), assumed a spherical shape, which is also the case for plain liposomes (no actin present) in G-buffer and F-buffer. When the actin concentration was increased to 1 mg/mL, the polymerizing actin filaments stretched the initially spherical liposome into a disklike shape. However, when the actin concentration was further increased to 5 mg/mL, the liposomes reverted back to a spherical shape.     

Melting behavior of one-dimensional zirconium nanowire

In this paper, we analyze the melting behavior of zirconium nanowire using the results of a series of molecular dynamics simulations. Our calculation employs a well-fitted, tight-binding many-body potential for zirconium atoms. The melting point of the nanowire is predicted by the root-mean-square displacements for inner and outer shells. Our simulations predict two melting behaviors: one is the inner melting and the other is the outer melting. Our results reveal that the melting of nanowire starts from the inner shell atoms. The melting point of zirconium nanowire is lower than the bulk value (2125 K). Moreover, the melting point of the inner shell is lower than that of the outer shell. A coexistence of crystal and liquid units is observed in the melting process of nanowire. An investigation of local clusters is carried out to further analyze the melting mechanism of the nanowire. The presence of the local clusters 1331, 1321, 1211, etc. is an indication of disordered structures. The pair and angular correlation functions are also presented for the analysis of the melting behavior. It is not only the diffusion of single atom but the diffusion of clusters result in the occurrence of the melting.     

A reliable ab initio potential energy surface and vibrational states for the ground electronic state of HgH2(X1Sigma+g)

A three-dimensional global potential energy surface for the ground (X (1)Sigma(+)(g))electronic state of HgH(2) is constructed from more than 13,00 ab initio points. These points are generated using an internally contracted multireference configuration interaction method with the Davidson correction and a large basis set. Low-lying vibrational energy levels of HgH(2), HHgD, and HgD(2) calculated using the Lanczos algorithm are found to be in good agreement with the available experimental band origins. The majority of the vibrational energy levels up to 9000 cm(-1) are assigned with normal mode quantum numbers. Our results indicate a gradual transition for the stretching vibrations from the normal mode regime at low energies to the local mode regime near 9000 and 8000 cm(-1) for HgH(2) and HgD(2), respectively, as evidenced by a decreasing energy gap between the (0,0,n(3)) and (1,0,n(3)-1) vibrational states and bifurcation of the corresponding wave functions.     

Infrared and electronic spectra of copper (II) complex of maleonitriledithiolate and 4,4'-dimethyl-2, 2'-bipyridine and their theoretical studies

The molecular structure and binding, as well as infrared and electronic spectroscopic properties for the title complex Cu(mnt)(dmbpy)(mnt(2-)=maleonitriledithiolate, dmbpy=4,4'-dimethyl-2,2'-bipyridine) were studied in this paper. With semi-empirical PM3 and non-empirical DFT (B3LYP/6-311G*) methods, the molecular geometry of the complex was optimized and corresponding vibrational spectra in the gaseous state were obtained. The calculated results derived from DFT were more reasonable than those from PM3. The point group of Cu(mnt)(dmbpy) in isolated gaseous state was C(2), in which Cu(II) adopted a distorted tetrahedral geometry and the dihedral angle between the N(2)Cu and S(2)Cu planes was about 29.814 degrees. And a complete assignment to the IR spectra of such a complicated molecule was exhibited. With ZINDO/S method an electronic spectrum was calculated. The results showed that the calculated values generally agreed with the observed ones. And a detailed explain was made on its electronic spectra.     

Novel synthesis of 2-oxo-3-butynoates by copper-catalyzed cross-coupling reaction of terminal alkynes and monooxalyl chloride

A general and efficient Cu(I)-catalyzed cross-coupling reaction of terminal alkynes and monooxalyl chloride for the synthesis of 2-oxo-3-butynoates and 2-oxo-3-butynoamides was developed. Readily available starting materials, the mild reaction conditions, wide functional group tolerance, and the obviation of stoichiometric organolithium or magnesium reagents combine to highlight this reaction.     

Stereocontrolled synthesis of bicyclic lactone derivatives via tungsten-mediated [3 + 2] cycloaddition of epoxides with a tethered alkynyl group

In the presence of BF3*Et2O, alkynyltungsten complexes underwent [3 + 2] cycloaddition with tethered epoxides to give bicyclic -lactones efficiently. Only one diastereomeric product was formed despite the presence of three stereogenic centers. A mechanism is proposed that involves formation of a tungsten-vinylidenium species via an SN2 attack of the epoxide carbon by an alkynyltungsten group to give a tungsten-enol ether species via counterattack at the central tungsten-vinylidenium carbon by the OBF3- terminus. Most of the tungsten enol ether species were too unstable for isolation and underwent hydrolysis to give only cis-fused -bicyclic lactones. This cyclization works for both cis- and trans-epoxides and tolerates various functional groups. In the case of trans-phenyl epoxide, the reaction led to an addition product via a 6-endo attack of epoxide by the tungsten fragment. This method provides a simple enantiospecific synthesis of complex bicyclic lactones if a chiral epoxide is used in the cyclization. It is also applicable to the one-pot synthesis of bicyclic unsaturated gamma-lactones if a suitable alkynyltungsten functionality is used.     

Influence of crystallization conditions on the crystalline transformation behavior of nylon 10 14

Three kinds of nylon 10 14 crystals with different perfections were prepared under various crystallization conditions. The Brill transition behavior of these nylon 10 14 crystals was investigated by variable-temperature X-ray diffraction. It was found that the crystallization conditions influence the Brill transition temperature greatly. The Brill transition temperature of the lamellar crystals grown from dilute solution is so high that no Brill transition temperature can be observed before melting. However, for crystals postannealed at 125 °C, the Brill transition temperature is as low as 130 °C. The results show that the Brill transition behavior of nylons is strongly dependent on the crystallization conditions, for example, the perfections of the crystals.     

Synthesis of C-nucleosides designed to participate in triplex formation with native DNA: specific recognition of an A:T base pair in DNA

[structure: see text] We have previously described a system of 2-aminoquinoline- and 2-aminoquinazoline-based C-deoxynucleosides (TRIPsides) that are designed to be incorporated into oligomers that can specifically bind in the major groove via Hoogsteen base pairing to any sequence of native DNA. The four TRIPsides are termed antiGC, antiCG, antiTA, and antiAT with respect to the Watson-Crick base pair targets that they bind. The first three TRIPsides have been prepared, characterized, and shown to form stable and sequence-specific triplexes. In the present study, we describe the preparation of two molecules, 2-amino-4-(2'-deoxy-beta-D-ribofuranosyl)quinazoline (7) and 2-amino-6-fluoro-4-(2'-deoxy-beta-D-ribofuranosyl)quinoline (14), that can serve as the remaining antiAT TRIPside. The phosphoramidites of 7 and 14 were prepared, but only the latter was successfully incorporated into DNA oligomers. It is demonstrated using UV-visible melting experiments that 14 forms sequence-specific intramolecular triplets with A:T base pairs at physiological pH.     

Interaction of tetrandrine with human serum albumin: a fluorescence quenching study.

The interaction of tetrandrine with human serum albumin (HSA) was studied by measuring fluorescence quenching spectra, synchronous fluorescence spectra and ultra-violet spectra. The fluorescence quenching spectra of HSA in the presence of tetrandrine showed that tetrandrine quenched the fluorescence of HSA. The quenching constants of tetrandrine on HSA were determined using the Stern-Volmer equation. Static quenching and non-radiation energy transfer were the two main reasons leading to the fluorescence quenching of HSA by tetrandrine. According to the F?rster theory of non-radiation energy transfer, the binding distances (r) and the binding constants (K(A)) were obtained. The thermodynamic parameters obtained in this study revealed that the interaction between tetrandrine and HSA was mainly driven by a hydrophobic force. The conformational changes of HSA were investigated by synchronous spectrum studies.