聚乙二醇对纳米二氧化钛性质和应用的影响

二氧化钛纳米晶光催化材料是近年来发展起来的新型环境友好材料,国内外研究者在利用二氧化钛纳米晶光催化降解苯酚、氯酚、甲醛等污染物方面做了大量的研究工作。研究表明TiO2的3种晶型,锐钛矿型、金红石型和板钛矿型中,有光催化作用的主要是锐钛型和金红石型,其晶型和晶粒大小     

Effect of Transition Metals (Cu, Co and Fe) on the Autothermal Reforming of Methane over Ni/Ce0.2Zr0.1Al0.7Oδ Catalyst

The transition metals (Cu, Co, and Fe) were applied to modify Ni/Ce0.2Zr0.1Al0.7Oδ catalyst.The effects of transition metals on the catalytic properties of Ni/Ce0.2Zr0.1Al0.7Oδ autothermal reforming of methane were investigated. The Ni-supported catalysts were characterized by XRD, TPR and XPS.Tests in autothermal reforming of methane to hydrogen showed that the addition of transition metals (Cu and Co) significantly increased the activity of catalyst under the conditions of lower reaction temperature,and Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ was found to have the highest conversion of CH4 among all catalysts in the operation temperatures ranging from 923 K to 1023 K. TPR, XRD and XPS measurements indicated that the cubic phases of CexZr1-xO2 solid solution were formed in the preparation process of catalysts.Strong interaction was found to exist between NiO and CexZr1-xO2 solid solution. The addition of Cu improved the dispersion of NiO, inhibited the formation of NiAl2O4, and thus significantly promoted the activity of the catalyst Ni/Cu0.05Ce0.2Zr0.1Al0.65Oδ.     

Sol-gel polycondensation of methyltrimethoxysilane in ethanol studied by <Superscript>29</Superscript>Si NMR spectroscopy using a two-step acid/base procedure

Sol-gel polymerization of methyltrimethoxysilane (MTMS) in ethanol using a two-step acid/base catalyzed procedure (B2) is followed by ²⁹Si NMR spectroscopy. Analysis of the structural evolution of the B2 system shows that esterification of monomeric and end silicon species is rate-limited while that of linear and cyclic species is able to reach pseudoequilibrium in the second basic step. Condensation reactivity is reduced with increasing network connectivity, however, to a much less degree under B2 conditions than MTMS polymerization under acidic conditions. Steric effects as well as many other factors are attributed to this trend. The concentration of cyclic and polycyclic species of the B2 system is nearly 3 times lower compared to the acid-catalyzed system. The empirical degree of condensation at the gel point is determined to be 0.88. The effects of cyclization and phase separation on MTMS gelation are discussed for both B2 and acid-catalyzed systems. Based on these results it is believed that MTMS-based gels form for B2 and not acid-catalyzed conditions due to reduced cyclization, rapid hydrolysis and condensation, effective use of functional groups, and effective contribution of branched and polycyclic species as crosslinking points to connect polymeric chains in the B2 system.     

SYNTHESIS OF AN AMPHIPHILIC PPESK-g-P(PEGMA) GRAFT COPOLYMER VIA ATRP AND ITS USE IN BLEND MODIFICATION OF PPESK MEMBRANES

Preparation of an amphiphilic graft copolymer having poly(phthalazinone ether sulfone ketone)(PPESK) as main chains was carried out by atom transfer radical polymerization(ATRP).The precursor,chloromethylated PPESK (CMPPESK),was prepared by using chioromethylether as chloromethylation agent.Then,poly(ethylene glycol) methyl ether methacrylate(PEGMA) was used as monomer to synthesize PPESK-g-P(PEGMA) by ATRP method under the catalysis of a cuprous chloride/2,2'-bipyridyl system.PPESK/PPESK-g-P(PEGMA) blen...     

离子液体参与原子转移自由基聚合的研究进展

主要阐述了近年来离子液体作为溶剂、单体或者配位剂在原子转移自由基聚合中的应用研究情况.从对聚合反应速率的大小的影响,聚合产物分子量多分散系数的变化,聚合物分子链功能性的设计,以及反应体系中催化体系的分离与循环使用等方面总结了离子液体的参与对原子转移自由基聚合的影响,并简要总结了导致各种变化的原因.最后展望了离子液体应用于原子转移自由基聚合技术的前景,并指出离子液体自身研究的发展是二者结合的关键问题.     

一种耐高温憎水聚芳醚的合成与性能初步研究

以双酚芴单体和全氟联苯为原料,通过亲核取代反应,在较低温度(120℃)下直接聚合,得到了一种高分子量的含芴部分含氟的聚芳醚,并用1H-NMR进行表征.合成的聚合物具有好的热稳定性,玻璃化温度达到271℃,5%的热失重为420℃.这些聚合物能溶于四氢呋喃、二氯甲烷、氯仿和DMAC等常见的有机溶剂,通过溶液浇注的方法制备出光滑、柔韧的膜,并利用表面接触角(CA)对膜材料的表面性能进行了表征.用氯仿制备膜的接触角为102°,而用四氢呋喃制备膜的接触角为107°,接触角接近聚四氟乙烯(112°),具有较好的憎水性.     

Ionic Circuits Based on Polyelectrolyte Diodes on a Microchip

Green means go : A polyelectrolyte diode on a microchip exhibits well‐defined nonlinear rectifying behavior. This system visualizes the dynamic distribution of ions in a charged polymer phase under an electric field on a real‐time basis using fluorescence images (see picture). Multiple polyelectrolyte diodes are integrated on a microchip to produce a variety of logic gates based on ionic circuits.

     

红外吸收法测定碳化铪粉末中的氧含量

应用氧氮分析仪建立碳化铪粉末中氧的测定方法。针对碳化铪熔点极高的特性,对加热功率、称样量和空白值等测定条件进行探讨,选择适合的助熔剂和高温石墨坩埚,确定了最佳测试条件。将该方法用于实际样品测定,测定结果的相对标准偏差小于2.0%(n=9),样品的加标回收率为98.1%～102.6%。     

3-胺基取代苯并吡喃酮类化合物的设计合成及抗肿瘤活性

根据生物电子等排原理, 设计并合成了一系列新颖的3-胺基取代苯并吡喃酮类化合物. 通过1H NMR, 13C NMR, MS, IR及元素分析确定其结构. 抗肿瘤活性测试结果表明, 部分该系列化合物对人结肠癌细胞株HCT116和人肝癌细胞株7721具有较好的抑制活性, 其中化合物6c, 6f, 6i, 6m和6o对人肝癌细胞株7721的半数抑制浓度(IC50)值均小于对照品姜黄素(IC50＝10.53 μmol&#8226;L－1), 化合物6f对人结肠癌细胞株HCT116和人肝癌细胞株7721的IC50值分别为5.57和4.92 μmol&#8226;L－1, 均小于姜黄素的相应值.     

无机纳米稀土发光材料的制备方法*

无机纳米稀土发光材料作为一种重要的发光材料,由于具有独特的光、电和化学性质,使其在高性能磁体、发光器件、显示、生物标记、光学成像和光学治疗等方面得到了广泛的应用。稀土发光材料的这些性质与材料的尺寸和形状密切相关,近年来研究者已经利用多种合成方法制备了不同形状的纳米稀土发光材料,包括纳米线、纳米棒、纳米管、纳米纤维和纳米片等。本文综述了无机纳米稀土发光材料的几种常用的制备方法,包括水热/溶剂热法、有机/无机前驱体热分解法和超声辅助合成法等,评述了这些方法的优缺点,并结合课题组在无机纳米稀土发光材料制备方面的工作,对无机纳米稀土发光材料制备方法的发展进行了展望。