煤燃烧过程中表面结构变化的SEM图像分析

介绍了SEM图像分析的多种方法,并讨论了各自的描述能力,利用这些方法分析煤在燃烧各阶段SEM图像,通过研究得到煤在燃烧过程中表面分形维数的变化规律,同时可获得表面孔的某些参数变化历程。分析表明,淮南低变质煤在850℃燃烧过程中,煤焦颗粒表面的分维数有一个先变低后变高的过程,煤焦表面分维数在2.2至2.5区间内变化;同时孔径分布由近双曲线分布变化为近正态分布,孔油加权平均形状因子增加,在研究过程中发现,不同的计算方法会对图像的分形维数值产生影响,确定合适的计算方法是分形理论在煤燃烧领域中应用的关键。通过比较发现Xie法较为适合计算煤焦表面SEM图像。     

新型烷基醚型键合固定相的制备及评价

 首次将一种新型硅烷偶联剂 β (3,4 环氧环己基 )乙基三甲氧基硅烷 (β ECTS)与辛醇反应 ,然后再键合到硅胶上 ,得到了醚型键合固定相 ,并用元素分析、13 C固体核磁、红外光谱等对其进行了表征。以甲醇 水简单的二元流动相体系 ,对该固定相进行了色谱评价。结果表明 ,该固定相具有较好的色谱性能 ,且在 pH 2 5～ 7 5时化学稳定性能良好 ,硅醇基效应得到了很好地抑制 ,可有效地用于碱性化合物的分离分析     

非平衡晶化控制水滑石晶粒尺寸

本文采用非平衡晶化法通过在晶化后期补加原料合成了一系列不同晶粒尺寸的水滑石（LDH）样品,研究表明：非平衡晶化法可在一定范围内调控LDH的粒径,所合成的LDH样品组成稳定,晶体结构完整。     

镁铝水滑石层板与层间阴离子相互作用的理论研究

本文采用以ASED-MO(含原子对排斥的EHMO法)为基础的结构自动优化的EHTOPT程序,对镁铝水滑石(LDHs)层板与层间阴离子相互作用进行了理论研究.以Mg6Al2(OH)16X@H2O为分子结构单元,计算并分析了与不同层间阴离子形成稳定结构的能量变化、成键状况及电荷转移情况,揭示了层间作用力的本质.结果表明,LDHs层板与层间阴离子间存在静电吸引、氢键等非共价键弱相互作用,且氢键作用为主,其强弱与阴离子电荷分布、空间排布方式密切相关;层间阴离子电荷分布同时还影响着层板酸碱性的变化.     

锆氢化反应热力学函数的计算

用B3LYP/SDD密度泛函方法计算了ZrH的微观性质,气态ZrH(D,T)的能量(E),熵(S)以及 Zr与氢同位素气体反应的热力学函数.在ZrH(s)、ZrD(s)和ZrT(s)的E和S的计算中,近似以分 子总能量中的振动能Ev代替固态能量,以电子和振动熵SEv代替固态熵.在这种近似下,计算了 不同温度下Zr与H2、D2、T2反应的ΔH、ΔG、ΔS及氢化反应平衡压力,导出了与温度 的依赖关系.计算结果表明,ZrH(s)的生成热为161.34 kJ穖ol-1,与实验值(173.5 kJ穖ol -1)接近,表明这种近似处理方法是合理的,可以用于研究贮氢材料氢化反应的热力学.     

On-line nanoliter cycle sequencing reaction with capillary zone electrophoresis purification for DNA sequencing

An integrated system for DNA sequencing based on a nanoreactor for cycle-sequencing reaction coupled with on-line capillary zone electrophoresis (CZE) for purification and capillary gel electrophoresis (CGE) for separation is presented. Less than 100 nl of premixed reagent solution, which includes dye-labeled terminator pre-mix, bovine serum albumin and template, was hydrodynamically injected into a fused-silica capillary (75 microm I.D.) inside a laboratory-made microthermocycler for cycle sequencing reaction. In the same capillary, the reaction products were purified by CZE followed by on-line injection of the DNA fragments into another capillary for CGE. Over 540 base pairs (bp) of DNA can be separated and the bases called for single-standed DNA with 0.9% error rate. The total time was about 3.5 h, or a cycle time of 2 h with staggered operation. For double-stranded DNA, a longer reaction time was required and base calling up to 490 bp with 1.2% error rate was achieved. The whole system is readily adaptable to automated multiplex operation for DNA sequencing or polymerase chain reaction analysis.     

阴离子型层柱材料的插层组装

提出插层组装的概念,论述了阴离子型层状材料经插层组装出结构有序的层柱材料,包括层柱材料插层组装途径、插层组装的客体、插层组装的驱动力以组装客体在层间的定位,以及插层组装的发展前景。     

New designed DNA light switch Ruthenium complexes as DNA photocleavers and Topoisomerase I inhibitors

Two ruthenium complexes containing a new ligand phipz (phipz = 2‐(1,10‐phenanthroline)‐1H‐imidazo[4,5‐b]phenazine) were designed and synthesized. These complexes were found to inhibit the DNA supercoiled relaxation mediated by topoisomerase I (topo I), cleave DNA under irradiation and bind to calf thymus DNA through intercalative mode. Furthermore, complex 2 shows higher photocleavage activity, topo I inhibition activity and DNA affinity than complex 1 . Additionally, introduction of phenazine unit may be the reason that two complexes exhibit DNA ‘light switch’ behavior. The present work shows that two complexes might be potential as new DNA ‘light switches’, DNA photocleavers and topo I inhibitors.     

Catalytic activities of NHC‐PdCl2 species based on functionalized tetradentate imidazolium salt in three types of C‐C coupling reactions

A functionalized tetradentate imidazolium salt 9,10‐bis{di[2′‐(N‐ethylimidazolium‐1‐yl)ethyl]aminomethyl}anthracene tetrakis(hexafluorophosphate) ( 1 ) has been synthesized and characterized. The catalytic activity of the NHC‐PdCl₂ species formed by compound 1 and PdCl₂ was tested in Suzuki‐Miyaura, Heck‐Mizoroki and Sonogashira reactions. The results showed that this catalytic system was effective for above three types of C‐C coupling reactions.