用紧耦合方法研究C4+和O6+与He原子碰撞

用双中心原子轨道紧耦合方法计算了C4+-He以及O6+-He碰撞的单俘获总截面,入射离子的能量范围为10～100keV/amu,所得计算结果在实验误差范围内与实验值很好符合.对满壳层入射离子,研究了单俘获截面随入射离子电荷态的变化,并讨论了原子轨道展开波函数数目对计算结果的影响.p     

对比式离心现象实验装置

为了弥补现行教科书中,离心运动的演示实验装置及离心现象产生实质的知识呈现不足,设计了符合学生认知规律的离心实验装置.该装置通过对比2个物体在相同的角速度下产生相反的运动状态,说明物体做离心运动,不是由角速度产生,而是只有合外为突然消失或是合外力不足以提供向心力时,才能产生离心运动.     

求解最小Steiner树的蚁群优化算法及其收敛性

最小Steiner树问题是NP难问题,它在通信网络等许多实际问题中有着广泛的应用．蚁群优化算法是最近提出的求解复杂组合优化问题的启发式算法．本文以无线传感器网络中的核心问题之一,路由问题为例,给出了求解最小Steiner树的蚁群优化算法的框架．把算法的迭代过程看作是离散时间的马尔科夫过程,证明了在一定的条件下,该算法所产生的解能以任意接近于1的概率收敛到路由问题的最优解．     

Fabrication of Long-Period Fibre Gratings Using 800 nm Femtosecond Laser Pulses

Long-period fibre gratings inside standard single-mode optical communication fibres are successfully fabricated with infrared femtosecond laser pulses. The refractive index perturbations are well confined within the fibre core by choosing the proper laser focusing parameters and translation speed of the fibre during the direct laser writing process. With the self-focusing effect considered and at a constant average irradiation dose of 1.62 × 10^3 J/（cm^2μm）, the threshold intensity for fabricating long-period gratings with infrared femtosecond laser pulses is determined to be 5.13 × 10^13 W/cm2.     

压差式矢量水听器方位估计中的干扰抵消

矢量水听器由于能获取声场中标量（声压）和矢量（振速）信息，因此单个的矢量水听器就可实现目标方位估计。单个矢量水听器是利用信号的声压和质点振速之间相关性进行信号方位估计，但是当存在干扰，并且干扰和信号之间相关时，如果对运用能量流进行方位估计的方法不加改进，则会出现很大的误差，甚至出现错误的估计。本文提出一种存在已知噪声干扰情况下的干扰抵消方法，并针对该方法进行了仿真试验，最后运用湖试数据进行了验证。结果表明，该方法能有效地减弱相千千柑对信号的影响，实现对信号的方位估计。     

Inferring mixed-culture growth from total biomass data in a wavelet approach

It is shown that the presence of mixed-culture growth in batch fermentation processes can be very accurately inferred from total biomass data by means of the wavelet analysis for singularity detection. This is accomplished by considering simple phenomenological models for the mixed growth and the more complicated case of mixed growth on a mixture of substrates. The main quantity provided by the wavelet analysis is the Hölder exponent of the singularity that we determine for our illustrative examples. The numerical results point to the possibility that Hölder exponents can be used to characterize the nature of the mixed-culture growth in batch fermentation processes with potential industrial applications. Moreover, the analysis of the same data affected by the common additive Gaussian noise still lead to the wavelet detection of the singularities although the Hölder exponent is no longer a useful parameter.     

微纳米加工技术在纳米物理与器件研究中的应用

物质在纳米尺度下可能呈现出与体材料不同的物理特件，这正是纳米科技发展的基础之一。要想探索在纳米尺度下材料物埋性质的变化规律及可能的应用领域，离不开相应的技术手段，微纳米加工技术作为当今高技术发展的重要技术领域之一，是实现功能人工纳米结构与器件微纳米化的基础。本文根据几个不同的应用领域，介绍了微纳米加工技术在纳米物理与器件研究领域的应用。     

离化团簇束法制备c轴取向的ZnO薄膜

为了探索低温可调控ZnO薄膜沉积技术,提出了一种新的ZnO薄膜制备方法,即离化团簇束（ICB）法,并自行设计研制了应用该方法制备ZnO薄膜的专门装置.采用超音速喷嘴获得高速锌原子团簇束,用Hall等离子体源产生氧离子束离化锌原子团簇,获得了较高的离化率.在沉积过程中,可以通过调节衬底偏压、氩氧比、衬底加热温度等参数,来控制成膜的质量;应用这个装置成功地在硅衬底上制备的ZnO薄膜,经XRD和EDS检测,薄膜的c轴取向一致,Zn、O原子百分比接近于1：1,成膜质量好.     

Fast Theoretical Simulation for Design of Helical Flux Compression Generators

A theoretical scheme is derived to achieve the numerical simulation of helical flux compression generator （HFCG） design, by which not only any physical approximation is not made, but also numerical simulation can be fast obtained. In particular, an analytic formula to calculate the inductance is deduced, which is extremely close to the experimental results. The physical process of relevant interesting physical quantity, such as inductance, enlarging current, and magnetic flux density, can be calculated to compare with the experimentally quantitative results.     

Air-activated carbons from almond tree pruning: Preparation and characterization

In this work the results obtained in the preparation and characterization of carbons made from almond tree pruning by non-catalytic and catalytic gasification (using K and Co) with air are analyzed and discussed. The main aim was to obtain high quality activated carbons at the lowest possible cost. The variables studied have been the temperature (190-260 °C) and the time (1-10 h) in non-catalytic gasification and the influence of the catalyst type (K and Co, 1 wt.% referred to cation, at 190 °C and 1 h) and the time (1-4 h) in catalytic gasification with Co at 190 °C. The air flow rate used in all the series was 167 cm³ min⁻¹. In non-catalytic gasification the reaction normalized rate versus the conversion degree was maintained until a conversion value of 10% for the experiment made at 260 °C since, at lower temperatures, this rate drops quickly for low conversion values. The N₂ adsorption isotherms for the carbons of this series resemble type I, although there is an increase of N₂ adsorbed volume at relatively high pressures. A temperature rise produced an increase of the carbon porosity and BET specific surface (116-469 m² g⁻¹). The activation time has a positive effect on the N₂ volume adsorbed by the carbons. The isotherms shapes were similar to those previously commented. A concentration equal to 1 wt.% was used to study the influence of the catalyst type. Under the studied experimental conditions, Co drives to a bigger porosity development than K, although with both catalysts a very similar pore size distribution is obtained. The activation time, in the gasifications catalyzed with Co, gives rise to a very important porosity development in the carbons. This produces a strong increase of the carbon specific surface area with very high values in the 4 h experiment, in which a BET specific surface of 959 m² g⁻¹ was obtained.