Realization of optical limiting with a magnetic fluid film

In this paper, optical limiting property in a magnetic fluid film is studied. The relationship between the emergent power and the incident power is investigated experimentally and theoretically. It is found that the limiting threshold is linear with the diaphragm aperture which accord with the theoretical prediction. The external magnetic field will affect the limiting property, and increase the limiting threshold.     

TX-100和CTAB交换动力学的核磁共振研究

运用核磁共振(NMR)方法分别测定了表面活性剂辛基苯聚氧乙烯醚(TX-100)和十六烷基三甲溴化铵(CTAB)在不同温度下的临界胶束浓度.阐述了应用1D NMR线型分析方法对表面活性剂快交换体系平均停留时间的定量测量.实验测量了TX-100和CTAB胶束溶液中表面活性剂分子在不同温度下的平均停留时间.结果显示,平均停留时间随温度的增加逐渐减小,说明TX-100和CTAB分子进出胶束的速率随温度的增加逐渐加快.利用阿伦尼乌斯公式拟合,获得了TX-100和CTAB的表观交换活化能,TX-100的表观交换活化能为17.6 k J/mol,CTAB的表观交换活化能为75.3 k J/mol.对TX-100和CTAB平均停留时间和表观交换活化能进行分析,得出平均停留时间和表观交换活化能与分子结构的关系:表观交换活化能反映的是疏水相互作用和静电斥力的大小;而平均停留时间不仅受活化能的影响,还与分子结构有关.     

新型有机电致磷光白光器件的研究

制备了结构为ITO/NPB/TCTA/FIrpic∶TCTA/Ir(MDQ)2(acac)∶TmPyPB/FIrpic∶TmPyPB/TmPyPB/LiF/Al的有机电致磷光发光器件。通过在双蓝光发光层之间插入较薄的红光层Ir(MDQ)2(acac)∶TmPyPB调节载流子、激子在各发光层中的分布,并结合TCTA和TmPyPB对发光层内载流子和激子的有效阻挡作用,混合实现白光发射。研究了红光层在不同厚度、不同掺杂浓度下对器件发光性能的影响。结果表明,红光发光层厚度为2nm、质量浓度为5%时,结合蓝光发光层和红光发光层,实现了色坐标为(0.333,0.333)、最大发光效率为11.50cd/A的白光发射。     

3,4-噻吩二羧酸、1,10-邻菲罗啉与稀土配合物的荧光性质及对硝基苯的检测

3,4-噻吩二羧酸(3,4-H₂tdc),1,10-邻菲罗啉(phen)和稀土硝酸盐经水热法合成三种配合物Ln₂(Htdc)₂(tdc)₂(phen)₂(H₂O)₄(Ln=Eu 1, Gd 2, Tb 3),并用X-射线单晶衍射分析方法测定了配合物1-3晶体结构,配合物1-3为双核分子。每个金属离子周围有2个3,4-tdc,1个3,4-Htdc,1个phen和2个配位水分子,配位数为9。配合物1和3在紫外灯下显强红光和绿光,其荧光发射光谱,在619和545 nm出现最大发射峰,分别对应于Eu(Ⅲ)离子的5D₀→7F₂和Tb(Ⅲ)离子的5D₄→7F₅跃迁。配合物2在425 nm观察到来自基于配体的π*→π最大发射峰。不同溶剂分子对配合物1荧光有不同程度的影响,基于荧光猝灭机理,配合物1具有选择性检测硝基苯污染物的能力。     

Giant viscosity enhancement in a spin-polarized fermi liquid

The viscosity is measured for a Fermi liquid, a dilute 3He-4He mixture, under extremely high magnetic field/temperature conditions (Bor=1.5 mK). The spin-splitting energy microB is substantially greater than the Fermi energy kBTF; as a consequence the polarization tends to unity and s-wave quasiparticle scattering is suppressed for T相似文献   

Influence of the weakly interacting light U boson on the properties of massive protoneutron stars

Considering the octet baryons in relativistic mean field theory and selecting entropy per baryon S=l,we calculate and discuss the influence of U bosons on the equation of state,mass-radius,moment of inertia and gravitational redshift of massive protoneutron stars(PNSs).The effective coupling constant gu of U bosons and nucleons is selected from 0 to 70 GeV~(-2).The results indicate that U bosons will stiffen the equation of state(EOS).The influence of U bosons on the pressure is more obvious at low density than high density,while the influence of U bosons on the energy density is more obvious at high density than low density.The U bosons play a significant role in increasing the maximum mass and radius of PNS.When the value of gu changes from 0 to 70 GeV~(-2),the maximum mass of a massive PNS increases from 2.11M_⊙ to 2.58M_⊙,and the radius of a PNS corresponding to PSR J0348+0432 increases from 13.71 km to 24.35 km.The U bosons will increase the moment of inertia and decrease the gravitational redshift of a PNS.For the PNS of the massive PSR J0348+0432,the radius and moment of inertia vary directly with gu,and the gravitational redshift varies approximately inversely with gu.     

诊断中性束加速电源打火检测与保护电路的研究与设计

通过检测打火短路过程中产生较大的di/dt 和du/dt 来实现高压电源的打火短路保护。在研究了中性束加速电源控制和保护特点的基础上, 设计了诊断中性束加速电源在打火短路过程中的di/dt 和du/dt 的检测电路和相应的保护电路, 实现提前对加速器高压电源打火短路的保护。     

场发射平板显示高低压电平转换电路

提出适用于场发射高压驱动的高低压电平转换电路设计及性能分析。通过模拟,此电路可以在100V的驱动工作电压以及10mA的驱动电流条件下安全工作,最高工作频率可达20MH_z。在50pF输出负载下上升时间和下降时间分别为14,25ns。同时分析了高压CMOS器件与0.8μm标准CMOS工艺兼容过程中的厚栅氧化对于低压器件及高压N管的阈值特性影响。     

叶顶间隙对离心压气机性能影响的研究

叶顶间隙的研究长期以来一直是叶轮机械研究和设计的热点和难点。本文采用CFD软件研究了进口叶尖相对马赫数分别为0．9、1．15、1．3时,有、无间隙的离心叶轮的气动性能,比较了压比、效率及流量的差别。并分析了用于 100 kW微型燃气轮机的高压比、高转速离心压气机在三种不同尺寸叶顶间隙下的性能,讨论了间隙影响的原因。数值模拟结果表明,叶顶间隙在一定范围内时,间隙主要减弱叶轮的升压能力,基本不影响效率和阻塞流量。     

The numerical method for three-dimensional impact with friction of multi-rigid-body system

The differential equations for planar impacts reduce to an algebraic form, and can be easily solved. For three dimensional impacts with friction, there is no closed-form solution, and numerical integration is required due to the swerve behavior of tangential impulse during collisions. The dynamic governing equations in the impact process are built up in impulse space based on the Lagrangian equation in this paper. The coefficient of restitution defined by Poisson is used as the condition of impact termination. A valid numerical method for solving three-dimensional frictional impact of multi-rigid body system is established. The singular cases of tangential movement in sticking point are especially noticed and analyzed. Several examples are present to reveal the different kinds of tangential movement modes varied with the normal impulse during collision.