A Novel Fluorescent Aminoacid Designed for Fluorometric Detection of Cu （Ⅱ）

A fluorescent aminoacid was designed for selective and sensitive detection of Cu(II) in aqueous solution. The designing of this Cu(II) fluorescent chemosensing molecule, N ± (1‐naphthyl). aminoacetic acid (NAA), was based on the binding of Cu(II) to aminoacetic acid and the novel charge transfer photophysics of 1‐aminonaphthalenes. The fluorescence of NAA was found quenched by Cu (II) and several other metal ions of similar electronic structure such as Co(II), Ni(II) and Zn(II). The quenching was shown to occur via electron transfer within the metal‐NAA complex, which required an optimal combination of high binding affinity and favorable redox properties of the components in the metal‐NAA complex and hence afforded selective fluorometric detection of Cu(II). The calibration graph obeyed Stern‐Volmer theory and was shown for Cu(II) over the range of 0–2.75 ± 10–⁴ mol/L. The quenching constant of Cu(II) was measured as 8.0 ± 10³ mol/L that was two orders of magnitude higher than those of Co(II), Ni(II) and Zn(II). The 3SD limit of detection for Cu(II) was 8.00 ± 10^?6 mol/L with a coefficient of variation of 1.65%. Linear range for quantitative detection of Cu(II) was 2.67 ± 10^?5‐2.75 ± 10^?4 mol/L. The method was applied to synthetic sample measurements which gave recoveries of 105%‐112%.     

CoCl_2·6H_2O or LaCl_3·7H_2O Catalyzed Biginelli Reaction. One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1 H)-ones

Ｉｎｔｒｏｄｕｃｔｉｏｎ1,4 Ｄｉｈｙｄｒｏｐｙｒｉｄｉｎｅｓｏｆｔｈｅｎｉｆｅｄｉｐｉｎｅｔｙｐｅ (ｅ .ｇ .Ｉ—ＩＩＩ)ａｒｅｔｈｅｍｏｓｔｓｔｕｄｉｅｄｃｌａｓｓｏｆｏｒｇａｎｉｃｃａｌｃｉｕｍｃｈａｎｎｅｌｍｅｄｉｃｉｎｅ ,ｗｈｉｃｈｈａｖｅｂｅｃｏｍｅａｌｍｏｓｔｉｎｄｉｓｐｅｎｓ ａｂｌｅｆｏｒｔｈｅｔｒｅａｔｍｅｎｔｏｆｃａｒｄｉｏｖａｓｃｕｌａｒｄｉｓｅａｓｅｓｓｕｃｈａｓｈｙｐｅｒｔｅｎｓｉｏｎ ,ｃａｒｄｉａｃａｒｒｈｙｔｈｍｉａｓ ,ｏｒａｎｇｉｎａ .1Ｉｎｔｈｅｐａｓｔｄｅｃａｄｅ…     

Ab initio global potential-energy surface for H5(+) --> H3(+) + H2

An accurate global potential-energy surface (PES) is reported for H5(+) based on more than 100,000 CCSD(T)/aug-cc-pVTZ ab initio energies. This PES has full permutational symmetry with respect to interchange of H atoms and dissociates to H3(+) and H2. Ten known stationary points of H5(+) are characterized and compared to previous ab initio calculations. Quantum diffusion Monte Carlo calculations are performed on the PES to obtain the zero-point energy of H5(+) and the anharmonic dissociation energy (D0) of H5(+) --> H3(+) + H2. The rigorous zero-point state of H4D+ is also calculated and discussed within the context of a strictly classical approach to obtain the branching ratio of the reaction H4D+ --> H3(+) + HD and H2D+ + H2. Such an approach is taken using the PES and critiqued based on the properties of the quantum zero-point state. Finally, a simple procedure for adding the long range-interaction energy is described.     

新型镍催化剂催化乙烯聚合的阳离子机理

含氮氧配位原子的镍催化剂是一类新型催化剂.文章以配体为[NH=CH－CH=CH－O]的镍催化剂为模型,用密度泛函方法（DFT）在B3LYP/LANL2MB水平上研究了该类乙烯聚合催化的反应机理.计算结果表明,催化的反应过程中,中心原子镍最先形成带空位的四边形阳离子配合物,乙烯以垂直于催化剂平面的方式占据空位,然后旋转到催化剂平面内以利于插入反应的进行；插入反应发生后,在催化剂中Ni和β-C之间形成一种氢桥键,协助新空位的形成,实现链的增长.     

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature.The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.     

室温离子液体EMIES的标准生成焓

在(298.15 ±0.01) K下用转动弹热量计测定了离子液体硫酸乙酯-1-甲基-3-乙基咪唑(EMIES)及合成它的原料1-甲基咪唑的恒容燃烧热,通过计算得到它们的标准燃烧焓 分别为(－2671±2) 和(－286.3±0.5) kJ·mol－1;标准生成焓 分别为(－3060±3) kJ·mol－1和(－2145±4) kJ·mol－1.结合文献上硫酸二乙酯的标准生成焓数据,得到了合成离子液体EMIES的反应热(－102.3±1.0) kJ·mol－1,与合成实验中观察到的强烈放热现象是一致的.根据离子液体EMIES的热容数据,计算了不同温度下EMIES的标准生成焓.     

Effects of amino acids on crystal growth of CaC2O4 in reverse microemulsion

Crystal growth of calcium oxalate (CaC2O4) in bulk aqueous solution, reverse microemulsion of p-octyl polyethylene glycol phenylether (OP)/iso-octyl alcohol (IOA)/cydohexane/water and above microemulsions containing different kinds of amino acids, such as aspartic acid (Asp), tyrosine (Tyr) and tryptophan (Trp) were studied. The results indicated that different crystallization types of the crystals, which were calcium oxalate monohydrate (COM), calcium oxalate dihydrate (COD) and calcium oxalate trihydrate (COT), existed in bulk aqueous solution. But CaC2O4 growth mainly paralleled with (1 01) plane of COM in reverse microemulsion because of the induction of surfactant at water/oil interface. After adding amino acids into microemulsions, the growth of CaC2O4 crystals mainly influenced by the varieties of amino acids and the pH values of the amino acid aqueous solution. When pH values of the solutions was higher than isoelectric points of amino acids, CaC2O4 crystal paralleled with (1 01) plane of COM more easily with the addition of Trp, Tyr, Asp in turn; however, when pH of the solutions was lower than isoelectric points of Trp, CaC2O4 crystal growth paralleled with (020) face of COM. It is obviously that amino acids, pH values of the solutions and surfactant played important roles in the process of crystal growth of CaC2O4 in the microemulsions. The formation mechanism of CaC2O4 was also discussed in different microemulsions at last.     

In Situ Fabrication of ZnS Semiconductor Nanoparticles in Layered Organic-inorganic Solid Template

Ordered ZnS semiconductor nanoparticles were in situ synthesized in metal halide perovskite organic/inorganic layered hybrids (CnH2n 1NH3)2ZnCl4 (n=10 and 12) by reaction of their spin-casting films with H2S gas. Transmission electron microscopy, UV-vis spectroscopy and small-angle X-ray diffraction were used to characterize the morphology and the structure of formed nanoparticles. Obtained results indicate an effective way to incorporate functional inorganic nanoparticles into structured organic matrices.     

一阶导数差示脉冲极谱法用于甲硝唑的定量研究

本实验运用一阶导数差示脉冲极谱法对甲硝唑及其制剂进行了定量研究。在０．００１ｍｏｌ／Ｌ氯化钾－０．００１ｍｏｌ／Ｌ盐酸－水（１＋０．２＋４８）的底液中，甲硝唑于－０．８００Ｖ（ｖｓ Ａｇ／ＡｇＣｌ）处出现一良好的一阶导数差示脉冲极谱峰，在５０～３００μｇ／ｍＬ范围内，药物浓度与其导数峰幅值呈线关系，检测限为８．０×１０＾－８ｍｏｌ／Ｌ。本法操作简便，快速，灵敏，结果准确。     

Further Daphniphyllum Alkaloids from the Leaves of Daphniphyllum macropodum Miq.

Five new polycyclic Daphniphyllum alkaloids, macropodumines F ( 1 ) and G ( 2 ), 17‐oxoyuzurimine ( 3 ), and macropodumines H ( 4 ) and I ( 5 ), were isolated from the leaves of D. macropodum Miq ., collected in Sichuan Province, China. The structures and relative configurations of the new compounds – as well as of four known, related alkaloids – were elucidated on the basis of in‐depth spectroscopic and mass‐spectrometric analyses, by chemical derivatization, and by comparison of spectroscopic data with those of known compounds.