热致型液晶聚合物的等温和非等温晶化动力学

利用等温和非等温方法详细研究了芳香族聚酯──热致型聚合物对，对’－联苯二甲酸二辛酯的结晶相和液晶相形成机理，并计算了相变过程中的表面自由能与温度系数，研究结果表明：从介晶相开始的结晶过程是二维异相成核、三维线性增长的，而从各向同性液相开始的液晶相形成过程则是二维异相成核二维线性增长的．对两个晶化过程的表面自由能的研究表明，该聚合物液晶相形成过程的相转变表面自由能比结晶过程小得多，预示了它将具有更大的晶化速率．研究还发现，该聚合物的液晶相形成过程具有比结晶过程大得多的温度敏感性．     

用双氧水绿色氧化环己酮合成己二酸的研究

以30%的双氧水为氧化剂, 钨酸钠与含N或O的双齿有机配体(草酸)形成的络合物为催化剂, 在无有机溶剂、无相转移剂的条件下, 研究了环己酮氧化制己二酸的反应. 研究结果表明, 用廉价的草酸为配体, 最佳反应条件为钨酸钠∶草酸∶环己酮∶30%的双氧水的物质的量比为2.0∶3.3∶100∶350, 在92 ℃下反应12 h, 可制得80.6%的己二酸; 用GC-MS跟踪了氧化过程中三种主要物质环己酮、己内酯及己二酸含量随反应时间的变化关系, 提出了其主要氧化机理为环己酮首先经Beayer-Villiger氧化反应生成己内酯, 己内酯进一步氧化成己二酸.     

Socket with built-in valves for the interconnection of microfluidic chips to macro constituents

This paper reports a prototype for a standard connector between a microfluidic chip and the macro world. This prototype demonstrate a fully functioning socket for a microchip to access the outside world by means of fluids, data signals and energy supply. It supports up to 10 channels for the input and output of liquids or gases, as well as compressed air or vacuum lines for pneumatic power lines. The socket has built-in valves for each flow channel. It also contains 28 pins for the connection of electrical signals and power. Built-in valves make it possible to control the flow in each channel independently. A chip ( 11.0 x 11.0 x 0.9 mm) can be mounted into or dismounted from the socket with one touch. The fluidic connectors of the socket are designed to contact vertically on the top of chip. And the electrical connectors (the spring array) of that physically support the chip and contact lead pads at the bottom of chip. No adhesives or solders are used at any contact points. The pressure limit for the connection of working fluids was 0.2 MPa and the current limit for the electrical connections was 1 A. This socket supports both serial and parallel processing applications. It exhibits great potential for developing microfluidic systems efficiently.     

Coaxial electrospinning core-shell fibers for self-healing scratch on coatings

Polystyrene (PS) fibers with core-shell structure were prepared by coaxial electrostatic spinning using liquid epoxy or curing agent as the core and PS solution as the shell. Scratch self-healing coatings were realized by using the healant-loaded core-shell fibers in the matrix.     

N－（N＇，N＇－二甲氨基甲基）丙烯酰胺－过硫酸钾引发丙烯酰胺聚合的研究

Ｎ－（Ｎ＇，Ｎ＇－二甲氨基甲基）丙烯酰胺－过硫酸钾引发丙烯酰胺聚合的研究潘松汉，唐康泰，王贞，王真智中国科学院广州化学研究所，广州，５１０６５０关键词Ｎ－（Ｎ＇，Ｎ＇－二甲氨基甲基）丙烯酰胺、反应动力学、氧化还原体系、相对分子质量及分布为了制备高质量...     

Synthesis and lysozyme adsorption of rod-like large-pore periodic mesoporous organosilica

Highly ordered rod-like large-pore periodic mesoporous organosilica (PMO) was successfully synthesized at low acid concentration with the assistance of inorganic salt using triblock copolymer P123 as a template. The roles of inorganic salt and acidity in the production of highly ordered mesostructure and the morphology control of PMOs were investigated. It was found that the inorganic salt can significantly widen the range of the synthesis parameters to produce highly ordered 2D hexagonal pore structure of p6mm symmetry. However, the uniform rod-like PMOs can only be synthesized in a narrow range of acid and salt concentrations, which were sensitive to induction time. The adsorption of lysozyme on PMO was studied at different pH values in comparison with adsorption on pure silica material under controlled morphology and pore structure. It was found that the adsorption capacity of lysozyme on the PMO was lower than that on pure SBA-15 silica material and the adsorption amounts are larger at pH 9.6 than at 7.0 for both materials. The results show that the electrostatic interaction between lysozyme and PMO/SBA-15 surface is more dominant than the hydrophobic forces and the interaction of neighboring lysozyme molecules also plays an important role.     

Acetic acid induced self-assembly of supramolecular compounds [Et4N]3[(WS4Cu2)2(mu-CN)3].2MeCN and [PPh4][WS4Cu3(mu-CN)2].MeCN from preformed clusters [A]2[WS4(CuCN)2] (A = Et4N, PPh4)

Reactions of two preformed trinuclear W/Cu/S clusters, [A](2)[WS(4)(CuCN)(2)] (1: A = Et(4)N; 2: A = PPh(4)), with different concentrations of acetic acid in MeCN generate two interesting 2D polymeric clusters [Et(4)N](3)[(WS(4)Cu(2))(2)(mu-CN)(3)].2MeCN (3), and [PPh(4)][WS(4)Cu(3)(mu-CN)(2)].MeCN (4), respectively. Compound 4 can also be readily obtained in a high yield from the reaction of 2 with equimolar [Cu(MeCN)(4)]PF(6) in MeCN. These compounds have been characterized by elemental analysis, IR spectra, thermal analysis, and single-crystal X-ray diffraction. An X-ray analysis reveals that compound 3 retains the WS(4)Cu(2) cluster core, which serves as a 3-connecting node to link equivalent nodes via single cyanide bridges, forming an anionic 2D (6,3) net. Compound 4 consists of a T-shaped WS(4)Cu(3) core, which also acts as a 3-connecting node, with links to 3 equivalent clusters either through single or double cyanide bridges, affording a different anionic 2D (6,3) network. The acetic acid induced aggregation of 3 and 4 from the two cluster precursors 1 and 2 suggests that this simple synthetic strategy is likely to be applicable to many related systems.     

老年人彩度对比敏感度函数研究及滤波应用

为研究老年人彩色视觉频率响应特性，获取彩度对比敏感度与空间频率之间的函数关系，本文在LCH均匀颜色空间基础上，固定明度和色调角值，以彩度作为变量，设计人眼彩度对比敏感度实验，进行人眼视觉观察实验。获得彩度对比敏感度与空间频率的关系，并构建指数型对比敏感度函数模型。经分析表明老年人眼彩度对比敏感度随着空间频率的增加，产生先升高再缓慢降低的变化，各色调角下彩度对比度存在差异。经分析人眼对比敏感度差异与人眼视觉辨色特性有很大的相关性。并且，将构建的对比敏感度函数模型用于实现基于人眼视觉系统的滤波处理。     

Formation,growth mechanism and packing sequences of binary alloy cluster anions from laser ablation of mixtures of lead and transition metals

By using laser ablation of the mixtures of a transition metal (M: Ti, Cr, Mn, Fe, Co, Ni, Cu, Zn, Pd, Ag) plus lead, M/Pb binary cluster anions were observed except for Zn, and the number of transition metal atoms contained in the binary clusters is at most 4. This behavior is different from that reported previously for M/Ge binary clusters. The experiments indicate that it is also very difficult to form Al/Pb clusters. The distribution patterns of M/Pb binary alloy cluster anions are remarkably similar to those of pure Pb clusters, consistent with a formation mechanism in which transition metal atoms are sequentially attached to [M(x-1)Pb(y)](-) clusters and thus form [M(x)Pb(y)](-) clusters by a simple condensation process. As the number of transition metal atoms increases, the intensities of binary clusters gradually decrease. It is proposed that [MPb(4)](-) and [MPb(5)](-) cluster anions might be the unit building blocks of M/Pb binary cluster anions, and the layer packing sequences for magic clusters are predicted on this basis. The [M(x)Pb(y)](-) binary clusters containing 13 atoms (x + y = 13; x not equal 0) are proposed to have an icosahedral structure.     

A Facile Synthesis of Indole-based Conjugated Derivatives

A novel synthetic method was developed for the preparation of indole-based conjugated derivatives with satisfied yields. By applying this strategy, a series of new compounds were prepared conveniently. All the obtained new indole derivatives were characterized by spectroscopic analyses, giving satisfactory data corresponding to their expected molecular structures.