爆炸地震波评价地面毁伤效应的实验研究

通过实验探索爆炸地震波评价爆源对地面冲击波毁伤效应的可能性 ,结果表明 ,在相同的地层状态条件下和一定的距离范围内 ,用爆炸地震波评价爆源对地面的毁伤效应是可行的。这在很大程度上弥补了利用空气冲击波压力测试和模拟目标毁伤评价燃料空气炸药 (FAE)爆源爆炸空气冲击波威力的不足。     

Nd-Fe-B/FeCo多层纳米复合膜的结构和磁性

制备了Nd₂₈Fe₆₆B₆/Fe₅₀Co₅₀多层纳米复合磁性薄膜，对溅射态和650℃退火处理15 min试样的相成分分析和微结构的观察显示，溅射态薄膜呈非晶态，经650℃退火处理15 min后，薄膜主要相成分为硬磁性Nd₂Fe₁₄B相和软磁性相FeCo(110)相.Nd₂Fe₁₄B相呈柱状，其易磁化c轴垂直于膜面，尺寸约10 nm.在硬磁性相和软磁性相之间存在少量富Nd相和非晶态，富Nd相大小约7 nm.磁性测量和分析表明，1)该系列薄膜退火态具有垂直于膜面的磁晶各向异性.2)对于固定厚度(10 nm)层Nd-Fe-B和不同厚度(t_FeCo=1—100 nm)层FeCo多层纳米复合膜,剩磁随软磁相FeCo 厚度的增加快速增加，而矫顽力则减小.当t_FeCo=5 nm时，最大磁能积达到200 kJ/m³. 3)硬磁相Nd-Fe-B层和软磁相FeCo层之间交换耦合导致剩磁和磁能积增强. 关键词： Nd-Fe-B/FeCo多层纳米复合膜 交换耦合 磁各向异性     

Optimality of a Class of Entanglement Witnesses for 3⊗3 Systems

Let $\varPhi_{t,\pi}: M_{3}({\mathbb{C}}) \rightarrow M_{3}({\mathbb{C}})$ be a linear map defined by $\varPhi_{t,\pi}(A)=(3-t)\*\sum_{i=1}^{3}E_{ii}AE_{ii}+t\sum_{i=1}^{3}E_{i,\pi (i)}AE_{i,\pi(i)}^{\dag}-A$ , where 0≤t≤3 and π is a permutation of (1,2,3). We show that the Hermitian matrix $W_{\varPhi_{t,\pi}}$ induced by Φ _t,π is an optimal entanglement witness if and only if t=1 and π is cyclic.     

Optimization and Comparative Study of Different Extraction Methods of Sixteen Fatty Acids of Potentilla anserina L. from Twelve Different Producing Areas of the Qinghai-Tibetan Plateau

In this study, supercritical fluid extraction (SFE), ultrasonic-assisted extraction (UAE), and microwave-assisted extraction (MAE) were applied to explore the most suitable extraction method for fatty acids of Potentilla anseris L. from 12 different producing areas of the Qinghai-Tibetan Plateau. Meanwhile, the important experimental parameters that influence the extraction process were investigated and optimized via a Box-Behnken design (BBD) for response surface methodology (RSM). Under optimal extraction conditions, 16 fatty acids of Potentilla anserina L. were analyzed via high-performance liquid chromatography (HPLC) with fluorescence detection, using 2-(4-amino)-phenyl-1-hydrogen-phenanthrene [9,10-d] imidazole as the fluorescence reagent. The results showed that the amounts of total fatty acids in sample 6 by applying SFE, UAE, and MAE were, respectively, 16.58 ± 0.14 mg/g, 18.11 ± 0.13 mg/g, and 15.09 ± 0.11 mg/g. As an environmental protection technology, SFE removed higher amounts of fatty acids than did MAE, but lower amounts of fatty acids than did UAE. In addition, the contents of the 16 fatty acids of Potentilla anserina L. from the 12 different producing areas Qinghai-Tibetan Plateau were significantly different. The differences were closely related to local altitudes and to climatic factors that corresponded to different altitudes (e.g., annual mean temperature, annual mean precipitation, annual evaporation, annual sunshine duration, annual solar radiation.). The temperature indices, photosynthetic radiation, ultraviolet radiation, soil factors, and other factors were different due to the different altitudes in the growing areas of Potentilla anserina L., which resulted in different nutrient contents.     

超薄Ag膜的椭偏光谱建模及解谱

用直流溅射法制备了6个不同厚度的超薄Ag膜。结合超薄Ag膜的结构特点,采用了Drude模型联合Lorentz Oscillator模型的解谱方法,得到1～6号样品的厚度分别为4.0,6.2,12.5,26.2,30.0和40.6 nm。从拟合结果的消光系数k图谱中发现,在1号到4号样品中分别于430,450,560和570 nm处出现了表面等离子体共振峰(SPR),随膜厚的增加共振峰宽化且峰位红移。最后,利用SPR理论计算出不同厚度Ag薄膜等离子体共振峰出现的位置,并和实验结果进行了比较。     

Planar core based starburst triphenylamine molecules as hole transporting materials for high-performance perovskite solar cells

<正>Starburst triphenylamine molecules are generally used as hole transporting materials (HTMs) for optoelectronic devices like solar cells, light emitting diode and field effect transistors [1]. The use of starburst triphenylamine molecules like spiro-OMeTAD HTM initiated the construction of solid state perovskite solar cells (PSCs)[2,3]. Currently, based on triphenylamine HTMs, the highest power conversion efficiency (PCE) of PSCs is up to 22.1%[4]. Nowadays, spiro-     

Step‐Growth Radical Addition‐Coupling Polymerization (RACP) for Synthesis of Alternating Copolymers

We report a new type of step‐growth radical addition‐coupling polymerization (RACP) involving consecutive addition of carbon‐centered radical derived from α,α′‐dibromo dibasic ester to NO double bond of C‐nitroso compound followed by cross‐coupling of carbon‐centered radical and in situ formed nitroxyl radical, which produces alternating copolymers with high molecular weight and unimodal molecular weight distribution from saturated and unsaturated monomers.

     

Highly stereoselective synthesis of (Z)-3-methoxy-1-methyleneisoindoles via DMAP catalyzed cyclization of methyl 2-alkynylbenzimidates

A DMAP (4-dimethylaminopyridine) catalyzed cyclization of methyl 2-alkynylbenzimidates has been developed, which affords 3-methoxy-1-methyleneisoindoles with excellent Z-stereoselectivity under mild and transition-metal-free conditions. The (Z)-3-methoxy-1-methyleneisoindole products can be converted to corresponding 3-amino-1-methyleneisoindoles, 3-methoxy-isoindoles, 3-methyleneisoindolinones and isoindolinones with high efficiency.     

A concise and diversity-oriented strategy for the synthesis of benzofurans and indoles via Ugi and Diels-Alder reactions

A one-pot synthesis of diverse benzofurans and indoles from readily available starting materials was achieved via the sequential Ugi four-component reaction, intramolecular Diels-Alder reaction, and oxidative aromatization.     

滚边法测量高能X射线源焦斑大小

应用于高能闪光X光照相技术的X射线源焦斑大小是闪光照相装置的关键参数, 直接影响成像的分辨能力。由于高能X射线的强穿透性和强辐射环境, 给焦斑测量带来一定困难。介绍了一种间接测量方法, 采用滚边装置(rollbar)成像得到X射线源的边扩展函数, 微分后得到光源的线扩展函数并计算调制传递函数(MTF), 而后从MTF为0.5所对应的空间频率之值确定出光源的光斑大小。给出了神龙二号加速器电子束聚焦调试实验中得到的X射线焦斑测量结果, 分析影响测量结果的因素并提出了解决方法。