Diode-Side-Pumped Passively Q-Switched Mode-Locked 532 nm Laser with a Nd:YAG/Cr4+:YAG/YAG Composite Crystal

We present a diode-side-pumped Q-switched mode-locked (QML) laser operating at 532 nm for the first time employing a composite crystal Nd:YAG/Cr⁴⁺:YAG/YAG and a KTP. The experimental results show that, using a suitable cavity and crystals, one can obtain high-quality QML laser output at 532 nm with a side-pumped system. We measure and analyze the QML performance of the fundamental frequency laser and the green laser. Under a pump power of 127 W, we obtain a QML laser operating at 532 nm with an average power of 4.97 W and a repetition rate of 0.2 GHz for the mode-locked pulses; the corresponding depth of modulation is close to 100%.     

氩-氮混合气电感耦合等离子体在元素和同位素分析中的应用进展

在传统Ar等离子体中引入其他活性气体(如氮气等)已经成为拓展其分析性能的一种重要手段。本文较系统的阐述了Ar-N₂混合气体电感耦合等离子体的基本物理化学性质,从N₂气引入引起传统Ar-ICP基本物理化学参数变化的层面出发探讨了Ar-N₂混合气等离子体特殊性质产生的机制,回顾了Ar-N₂混合气电感耦合等离子体在质谱分析中近40年的应用成果,并且展望了该技术在未来元素和同位素分析领域的应用前景。     

基于宽带多通道的光谱反射率重建方法研究

复制的多光谱数据获取要求图像数据具有设备无关、场景无关特性,能够真实客观表征物体颜色信息。针对获取系统扰动、噪声误差以及光谱重建中训练样本典型代表性与相关性要求,提出了基于正交回归的光谱重建算法,并通过子空间跟踪的训练样本选择算法,选择重建样本与训练样本集中相关性与代表性最好的样本参与光谱重建。实验通过改造后的仙娜宽带多通道成像系统进行验证,数据表明本文提出的方法,所选训练样本能较好的表征样本空间并具有较好的正交性,在宽带多光谱成像方面,重建光谱平均色度误差为3.6,其光谱精度与色度精度较其他方法具有明显提高。     

风机封闭系统内噪声模拟分析

风机系统工作时的一个突出问题是其进风口和出风口产生的噪声。由于风机流场非常复杂,以及实验成本、实验条件限制,基于计算流体力学（Computational Fluid Dynamics, CFD）的理论逐渐成为风机噪声估计的重要方法。本文拟通过对由风机及其冷却系统构成的封闭系统进行数值建模和仿真,判断出风机主要气动噪声源的位置和种类,为处于封闭系统内的风机的噪声大小预测,提供一个可供参考的信息。结果表明：风机出口腔体内部非定常压力波动强度最大。     

Effects of delayed recovery and nonuniform transmission on the spreading of diseases in complex networks

We investigate the effects of delaying the time to recovery (delayed recovery) and of nonuniform transmission on the propagation of diseases on structured populations. Through a mean-field approximation and large-scale numerical simulations, we find that postponing the transition from the infectious to the recovered states can largely reduce the epidemic threshold, therefore promoting the outbreak of epidemics. On the other hand, if we consider nonuniform transmission among individuals, the epidemic threshold increases, thus inhibiting the spreading process. When both mechanisms are at work, the latter might prevail, hence resulting in an increase of the epidemic threshold with respect to the standard case, in which both ingredients are absent. Our findings are of interest for a better understanding of how diseases propagate on structured populations and to a further design of efficient immunization strategies.     

基于石英增强光声光谱的HCl痕量气体高灵敏度探测研究

HCl是一种有毒有害气体,对其高灵敏度探测具有非常重要的意义,然而到目前为止,采用激光光谱的手段对其探测的研究报道很少。石英增强光声光谱(QEPAS)是近年来发展起来的一种痕量气体探测技术,具有系统体积小、价格低廉、探测灵敏度高等优点。以5 000 ppm HCl∶N₂混合气作为待测目标,采用输出波长为1 742.38 nm的分布反馈连续波单纵模半导体激光器,开展对基于QEPAS技术的HCl高灵敏度探测研究。为了提高信噪比和简化数据处理过程,QEPAS传感器系统采用波长调制和2次谐波探测技术。研究中,首先对声波探测系统中微共振腔强声波增强特性进行了讨论,选择了“共轴”形式的声波微共振腔,并对其尺寸进行了优化,选择的微共振管长度为4 mm、内径为0.5 mm。实验中研究了激光波长调制深度对QEPAS系统产生的信号幅度的影响,当QEPAS系统积分时间为1 s、激光波长调制深度为0.23 cm-1时,获得了815 ppb的优异检测极限,归一化噪声等效吸收系数为7.41×10-9 cm-1·W·Hz-1/2。在后续的实验中,可在待测HCl气体中加入水汽分子,提高HCl分子的热弛豫速率,进一步提高HCl-QEPAS传感器系统的信号强度。     

铅在铁路岩石边坡创面人工土壤中的迁移特性研究

山区大规模的铁路建设产生了大量的岩石边坡,前期研究表明边坡创面人工土壤受Pb污染,且有中等程度的富集。土壤类型、植被搭配类型是影响Pb迁移特性的重要因素,而目前却未见人工土壤及植被搭配类型对Pb迁移特性影响的相关报道。该研究以铁路岩石边坡创面人工土壤为对象,利用原子吸收分光光度法、红外光谱法分析了人工土壤对Pb的吸附-解吸特性及机制;运用野外人工模拟降雨实验,进一步考察在暴雨径流作用下,Pb在不同植被搭配类型的边坡人工土壤中的迁移过程。结果表明人工土壤对Pb的吸附量随着溶液平衡浓度的增加而急速增加,等温曲线呈“S”型,Freundlich方程能较好地描述人工土壤对Pb的吸附行为,R2为0.91。二次幂函数方程能较好描述NH₄AC对铅的解吸过程,R2为0.96。人工土壤有高岭石红外光谱特征吸收峰,属于高岭石型图谱。高岭石表面-OH、腐殖质表面-OH和-COOH参与吸附作用,置换出H+。人工土壤易将交通运输产生的Pb固定,但又容易再次释放。不同植被搭配类型边坡Pb流失量表现为草本＞草本+灌木＞草本+灌木+乔木。暴雨径流作用下Pb随沉积物相流失是边坡创面人工土壤Pb流失的主体,边坡土壤的侵蚀是导致Pb迁移扩散的主要原因,因此促进边坡植被的恢复,减小边坡人工土壤的侵蚀作用是防止Pb迁移扩散的关键。     

Preparation, characterization and photocatalytic activity of polycrystalline Bi2O3/SrTiO3 composite powders

Bi₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidation of methanol. These powders were characterized by UV-Visible diffuse reflectance spectra, SEM and X-ray diffraction (XRD). The results revealed that all the Bi₂O₃/SrTiO₃ composite powders exhibited higher photocatalytic activity than pure SrTiO₃, Bi₂O₃ and TiO₂ (P25) under visible light irradiation (λ>440 nm). The effects of the Bi₂O₃ contents on the photocatalytic activities of the composite powders were examined, the photocatalytic activities increased with the content of Bi₂O₃ increasing to a maximum of 83% and then decreased under visible light irradiation. The effects of the calcination temperatures on the photocatalytic activities of the composite powders were also investigated.     

基于设备结构分解的可视化故障推理与诊断技术研究

通过定义热区和热区索引,将故障推理与诊断同设备结构分解相对应,在诊断的过程中构建了故障自动推理编码规则,可将故障树转换成一系列可操作的且具有一定逻辑关系的编码,实现可视化故障自动推理和诊断。通过某型电子装备进行故障推理实例验证,表明该方法层次结构清晰,推理简单有效,能够实现装备可视化的LRU级分层故障诊断和故障的快速定位。     

Structural and magnetic properties of RF sputtered FePt/Fe multilayers

Series of [FePt(4min)/Fe(t_Fe)]₁₀ multilayers have been prepared by RF magnetron sputtering and post-annealing in order to optimize their magnetic properties by structural designs. The structure, surface morphology, composition and magnetic properties of the deposited films have been characterized by X-ray diffractometer (XRD), Rutherford backscattering (RBS), scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX) and vibrating sample magnetometer (VSM). It is found that after annealing at temperatures above 500 °C, FePt phase undergoes a phase transition from disordered FCC to ordered FCT structure, and becomes a hard magnetic phase. X-ray diffraction studies on the series of [FePt/Fe]_n multilayer with varying Fe layer thickness annealed at 500 and 600 °C show that lattice constants change with Fe layer thickness and annealing temperature. Both lattice constants a and c are smaller than those of standard ones, and lattice constant a decreases as Fe layer deposition time increases. Only a slight increase in grain size was observed as Fe layer decreased in samples annealed at 500 °C. However, the increase in grain size is large in samples annealed at 600 °C. The coercivities of [FePt/Fe]_n multilayers decrease with Fe layer deposition time, and the energy product (BH)_max reaches a maximum in the samples with Fe layer deposition time of 3 min. Comparison of magnetic properties with structure showed an almost linear relationship between the lattice constant a and the coercivities of the FePt phase.