Studies on the Effects of Additional Components on Micellization of CTAB via Surface Tension Measurements

The effects of Tris-HCl buffer solution on the cmc of cetyltrimethylammonium bromide (CTAB) were studied by surface tension measurement. The result shows that the effect of the buffer solution depends on the interaction between CTAB and NaCl and the structure accelerants of water, Tris. A series of parameters, including the critical micelle concentration (cmc), the surface tension at cmc (γ_cmc), the adsorption efficiency (pC₂₀), and the effectiveness of surface tension reduction (∏_cmc) were obtained from the surface tension measurements in the presence of glycine with different concentration in the Tris-HCl buffer solution at 27°C. In addition, maximum surface excess concentration (Γ _max) and minimum surface area per molecule (A_min) at the air-water interface were estimated according to the Gibbs adsorption isotherm. The thermodynamic parameters (Δ C _p,m , Δ H _m,tr , Δ C _p,m,tr ) of micellization for CTAB in the absence and presence of glycine at different temperature were also been obtained.     

在线质谱仪检测植物排放的挥发性有机物

利用在线检测质谱仪(SPIMS-1000)分别对高温烘烤、长时间密封保存、机械损伤等处理过的松科松属马尾松(Pinus Massoniana L.)样品排放的挥发性有机物(VOCs)与新鲜样品进行对比检测。SPIMS-1000在线检测质谱仪能够检测出植物排放的异戊二烯(m/z 68)和单萜(m/z 136),及其它一些特异性组分,如(Z)-3-己烯醛(m/z 98)等。利用在线检测质谱仪实现敞开环境中原位植物排放气体的检测。实验表明,在线检测质谱仪被广泛应用于环境中VOCs的实时、在线、定性快速检测。     

宽离子能量检测范围垂直引入反射式飞行时间质谱仪的研制

本实验室研制了国内首台宽离子能量检测范围飞行时间质谱仪。仪器采用紧凑式电子轰击源设计,配合离子透镜系统有效的调制离子流,飞行时间质量分析器采用了离子垂直引入式,双场加速和双场反射以及大尺寸MCP检测装置设计。仪器单离子信号半峰宽约2 ns,仪器分辨率优于1600FWHM,检测实际样品质量范围为1~127 amu(仪器理论质量检测上限优于800 amu),可检测离子能量范围优于2个数量级(3~140 eV)。若该TOF质量分析器与短瞬高压脉冲放电离子源耦合联用,可广泛应用于高能离子束的快速检测,如真空阴极放电对制备薄膜、离子注入材料的表征,导电材料的离子电荷态分布以及离子扩散速度的测定等。     

From Nitro‐ to Sulfonyl‐Based Chromophores: Improvement of the Comprehensive Performance of Nonlinear Optical Dendrimers

Through the combination of the divergent and convergent approaches, coupled with the utilization of the powerful Sharpless “click‐chemistry” reaction, two series of sulfonyl‐based high‐generation NLO dendrimers were conveniently prepared with high purity and in satisfactory yields. Thanks to the perfect three‐dimensional (3D) spatial isolation from the highly branched structure and the isolation effect of the exterior benzene moieties and the interior triazole rings, these dendrimers exhibited large second harmonic generation coefficient (d₃₃) values up to 181 pm V^?1, which, to the best of our knowledge, is the highest value so far for polymers containing sulfonyl‐based chromophore moieties. Meanwhile, compared with the nitro‐chromophore‐based analogues, their optical transparency and NLO stability were improved in a large degree, due to the lower dipole moment (μ) and the special main‐chain structure of sulfonyl‐based chromophore in these dendrimers.     

Synthesis of Imides by Palladium‐Catalyzed C?H Functionalization of Aldehydes with Secondary Amides

An efficient palladium‐catalyzed C? H functionalization of aldehydes with various N‐substituted N‐heteroarene‐2‐carboxamides has been developed for the synthesis of secondary imides. The reaction tolerates various functionalities, such as methoxy, fluoro, chloro, and bromo groups. A tentative radical mechanism for a Pd^II/Pd^IV catalytic cycle is proposed.     

Highly Stereoselective Conjugate Addition and α‐Alkynylation Reaction with Electron‐Deficient Alkynes Catalyzed by Chiral Scandium(III) Complexes

The highly Z‐selective asymmetric conjugate addition of 3‐substituted oxindoles to alkynyl carbonyl compounds has been developed by using scandium complexes of chiral N,N′‐dioxides under mild conditions. The thermodynamically unstable Z‐olefin derivatives were obtained in excellent yields and high enantiomeric and geometric control. The catalyst was also found to be effective in the asymmetric acetylenic substitution reaction of 3‐substituted oxindoles, giving excellent enantioselectivities.     

Near‐Infrared‐Controlled,Targeted Hydrophobic Drug‐Delivery System for Synergistic Cancer Therapy

Hydrophobicity has been an obstacle that hinders the use of many anticancer drugs. A critical challenge for cancer therapy concerns the limited availability of effective biocompatible delivery systems for most hydrophobic therapeutic anticancer drugs. In this study, we have developed a targeted near‐infrared (NIR)‐regulated hydrophobic drug‐delivery platform based on gold nanorods incorporated within a mesoporous silica framework (AuMPs). Upon application of NIR light, the photothermal effect of the gold nanorods leads to a rapid rise in the local temperature, thus resulting in the release of the entrapped drug molecules. By integrating chemotherapy and photothermotherapy into one system, we have studied the therapeutic effects of camptothecin‐loaded AuMP‐polyethylene glycol‐folic acid nanocarrier. Results revealed a synergistic effect in vitro and in vivo, which would make it possible to enhance the therapeutic effect of hydrophobic drugs and decrease drug side effects. Studies have shown the feasibility of using this nanocarrier as a targeted and noninvasive remote‐controlled hydrophobic drug‐delivery system with high spatial/temperal resolution. Owing to these advantages, we envision that this NIR‐controlled, targeted drug‐delivery method would promote the development of high‐performance hydrophobic anticancer drug‐delivery system in future clinical applications.     

Effect of hydrolysis degree of hydrolyzed polyacrylamide grafted carboxymethyl cellulose on dye removal efficiency

In this present work, a series of hydrolyzed polyacrylamide grafted carboxymethyl cellulose (CMC-g-HPAM) was prepared. The structure and solution properties of CMC-g-HPAM were characterized by FTIR, ¹H-NMR, elemental analysis and zeta potential measurements. The graft copolymers were applied as flocculants to remove methylene blue (MB), a cationic dye, from aqueous solutions. In comparison with its precursors, carboxymethyl cellulose (CMC) and polyacrylamide CMC-g-PAM, CMC-g-HPAM exhibited higher removal efficiencies. Furthermore, the flocculation performance of the copolymers was significantly improved with the increase of the hydrolysis degree, and the MB removal efficiency was more than 90 % when the hydrolysis degree of CMC-g-HPAM was higher than 80 %. More importantly, image analysis in combination with fractal theory demonstrated that the graft copolymers could produce notably denser and larger flocs, which was of great significance in practical water treatment. The improved flocculation performance was ascribed to both charge neutralization and bridging effects.     

阳离子聚丙烯酰胺水分散液的制备及表征

通过丙烯酰胺(AM)与甲基丙烯酰氧乙基三甲基氯化铵(DMC)的水相分散共聚合制得阳离子聚丙烯酰胺(CPAM)水分散液.以红外光谱(FTIR),核磁共振(1H-NMR),光学显微照片(OP)证实了产物结构与形成机理;研究了引发剂类型及用量,无机盐选择及用量,分散剂用量及单体配比对CPAM转化率、分子量及分散液黏度的影响.结果表明,采用2,2’-偶氮二[2-(2-咪唑啉-2-代)丙烷]二氢氯化物(VA-044)和过硫酸钾(KPS)/甲醛次硫酸氢钠(SFS)复合引发剂,在硫酸铵浓度28%～32%,同时添加少量硫酸锂或氯化钠,分散剂0.5%～1.5%(所有物质用量皆对总反应体系而言)条件下,可在高转化率同时得到分子量较高、流动性良好的CPAM水分散液.     

模板剂缓释法合成分子筛大单晶

在分子筛的合成中,通过使用四咪唑基取代的硼类化合物(四咪唑硼钠)作为模板剂,在溶剂热条件下,成功得到了磷酸铝盐分子筛AlPO₄-11的大单晶。电喷雾质谱、¹⁹F和¹¹B NMR等研究结果表明,在溶剂热条件下四咪唑硼钠起到了缓释剂的作用,其自身经历缓慢分解,持续释放低浓度咪唑分子的过程。由其释放出来的咪唑分子起到事实上的模板作用。因其浓度较低,限制了分子筛结晶过程中晶核形成的数量,从而易于导向分子筛大单晶的生成。通过引入不同种类的四取代硼类化合物作为模板剂,这种分子筛大单晶的合成策略可潜在应用于其它分子筛材料。