Pathway from N‐Alkylglycine to Alkylisonitrile Catalyzed by Iron(II) and 2‐Oxoglutarate‐Dependent Oxygenases

N‐alkylisonitrile, a precursor to isonitrile‐containing lipopeptides, is biosynthesized by decarboxylation‐assisted ‐N≡C group (isonitrile) formation by using N‐alkylglycine as the substrate. This reaction is catalyzed by iron(II) and 2‐oxoglutarate (Fe/2OG) dependent enzymes. Distinct from typical oxygenation or halogenation reactions catalyzed by this class of enzymes, installation of the isonitrile group represents a novel reaction type for Fe/2OG enzymes that involves a four‐electron oxidative process. Reported here is a plausible mechanism of three Fe/2OG enzymes, Sav607, ScoE and SfaA, which catalyze isonitrile formation. The X‐ray structures of iron‐loaded ScoE in complex with its substrate and the intermediate, along with biochemical and biophysical data reveal that ‐N≡C bond formation involves two cycles of Fe/2OG enzyme catalysis. The reaction starts with an Fe^IV‐oxo‐catalyzed hydroxylation. It is likely followed by decarboxylation‐assisted desaturation to complete isonitrile installation.     

基于车桥耦合理论的梁式桥阻尼比识别研究

提出一种基于车桥耦合动力学理论的梁式桥阻尼比识别方法. 首先按照动力学理论将测试车设计为单自由度体系, 然后利用安装在测试车上的传感器采集信号, 从测试车与桥梁接触点响应信号中得到梁式桥响应的信号, 基于车桥耦合动力学原理滤波处理得到包含梁式桥第一阶频率的信号, 最后假定梁式桥阻尼比值, 通过假定的梁式桥阻尼比值获取假定的梁式桥第一阶振型, 不断循环直至假定的阻尼比值下计算的第一阶振型最大值点居中, 即为识别的梁式桥真实阻尼比. 本文首先从车桥耦合动力学理论推导上说明了该方法的可行性, 然后考虑在不同车速与非恒定车速、路面粗糙度、环境噪音等影响因素下进行车桥耦合动力学模型分析, 最后通过实桥试验进行了初步验证. 研究结果表明: 该方法能一定程度上克服外界不利因素的影响, 达到识别梁式桥阻尼比的目的, 为识别梁式桥阻尼比提供一种更优方法, 其具有参数设置较少、操作简单方便以及更高测试精度等优点, 同时有助于推动基于车桥耦合的车桥耦合动力学理论技术在梁式桥模态参数识别工作中的实际工程应用.      

Oxidation of methanol catalyzed by silica-supported polystannazane–copper complex

Silica-supported polystannazane–copper complex has been prepared and used as a catalyst for the oxidation of methanol. The results showed that the catalyst could catalyze the oxidation of methanol to formaldehyde at a high yield and selectivity at 30°C and under 1 atm mild conditions. The N/Cu mole ratio in the complex, temperature and the amount of NaOH additive had much influence on the catalytic activity. The complex was stable during the reaction and could be used repeatedly.     

Self-Compacting Alkali-Activated Materials: Progress and Perspectives

Alkali-activated materials (AAMs) are considered to be alternative cementitious materials for civil infrastructures. Nowadays, efforts have been made in developing AAMs with self-compacting ability. The obtained self-compacting AAMs (SCAAMs) accomplish superior passing and filling properties as well as excellent mechanical and environmental advantages. This work critically revisits recent progresses in SCAAMs including mixture proportions, fresh properties, mechanical strength, microstructure, acid and sulfate resistance, high temperature behaviors, impact resistance and interface shear strength. To facilitate direct comparison and interpretation of data from different publications, mixture proportions were normalized in terms of the content of key reactive components from precursors and activators, and correlation with mechanical behaviors was made. Moreover, special attention was paid to current research challenges and perspectives to promote further investigation and field application of SCAAMs as advanced construction material.     

吸管法和比重计法测定土壤机械组成的比对研究

土壤机械组成是土壤的基本属性,也是第三次全国土壤普查(“三普”)的重要指标。参照“三普”规定的测定土壤机械组成的吸管法和比重计法的分析规范对来自河南封丘、江西鹰潭和新疆乌鲁木齐等地区的3种土壤试样进行分析,讨论平行测定的精密度和测定过程中的关键点,进而对两种测定方法进行评价。结果表明,吸管法和比重计法的分析过程中存在一些影响分析结果的重点步骤,这些关键细节对提升“三普”土壤机械组成结果准确性和分析效率至关重要。吸管法和比重计法测定获得的土壤质地类型结果基本一致。通过平行试样测定结果允许的绝对相差分析发现吸管法的精密度较比重计法稍差,但两者都能达到土壤普查的要求。通过两种土壤机械组成测定方法的比对研究,为基层实验室顺利开展本项目的测定提供借鉴,为第三次全国土壤普查工作提供技术支撑。     

Effect of Stress-Dependent Thermal Conductivity on Thermo-Mechanical Coupling Behavior in GaN-Based Nanofilm Under Pulse Heat Source

The thermal properties of a nanostructured semiconductor are affected by multi-physical fields,such as stress and electromagnetic fields,causing changes in temperature and strain distributions.In this work,the influence of stress-dependent thermal conductivity on the heat transfer behavior of a GaN-based nanofilm is investigated.The finite element method is adopted to simulate the temperature distribution in a prestressed nanofilm under heat pulses.Numerical results demonstrate the effect of stress field on the thermal conductivity of GaN-based nanofilm,namely,the prestress and the thermal stress lead to a change in the heat transfer behavior in the nanofilm.Under the same heat source,the peak temperature of the film with stress-dependent thermal conductivity is significantly lower than that of the film with a constant thermal conductivity and the maximum temperature difference can reach 8.2 K.These results could be useful for designing GaN-based semiconductor devices with higher reliability under multi-physical fields.     

低压供热涂层材料制备及热性能研究

低压供热技术具有安全系数高和节能降耗等优势,因而成为石化稠油长输管线、风力发电叶片冬季防覆冰和室内供暖等领域的研究热点之一。本文制备了一系列低压供热涂层材料,研究不同碳功能填料对涂层发热速率、发热功率及最高发热温度的影响规律,并揭示石墨烯和碳纤维对提升涂层材料热性能的协同作用。其中石墨烯纳米片的还原程度对材料热性能具有重要影响,降低其表面官能团密度对提升涂层供热特性具有促进作用,但是官能团密度过低会导致石墨烯纳米片的团聚现象,引起涂层发热不均匀。加入适量碳纤维可以提高石墨烯的均匀分散性,提升发热速率。优化石墨烯纳米片和碳纤维的比例后,采用24V电压驱动时,涂层材料的发热速率达到7.1℃·s^-1,功率密度为800W·m^-2,最高发热温度为124℃。     

A Novel 3D Na(I) Coordination Polymer Constructed by 3,5-Bis(4'-Carboxy-Phenyl)-1,2,4-Triazole: Synthesis,Crystal Structure,and Photocatalytic Property

Crystallography Reports - A novel 3D metal coordination polymer, {[Na4(µ2-H2O)(DMF)2(BCT)2]?DMF}n (I) (DMF = N,N-dimethylformamide, H2BCT =...     

Positron lifetime study in BaTiO3 ceramics with different Ba/Ti ratios

The positron lifetime spectra in 0.25 at.% La-doped BaTiO₃ with different Ba/Ti ratios have been measured at room temperature. It was found from the experiments that with deviating from exact stoichiometry the positron lifetime τ₂ decreases and the intensity I₂ increases for Ba/Ti ratio smaller than stoichiometric and they have more significantly similar changes for Ba/Ti ratio larger than stoichiometric. The non-monotonic dependence of positron lifetime parameters on Ba/Ti ratio is regarded as that the τ₂ component is contributed together by positrons annihilating at the grain boundaries and Ba vacancies and/or Ti vacancies, and small deviations from exact stoichiometry would be expected to increase the concentration of defects such as Ba vacancies for Ba/Ti < and Ti vacancies for Ba/Ti > 1.     

PDT光敏剂HA在不同液相体系下的光谱特性研究

为了对候选光敏剂竹红菌甲素(HA)进行改性并保持其优异的敏化特性,对HA的光谱特性和激发态性质作了进一步的指认。系统研究了HA在不同液相体系下的吸收和荧光光谱,对指认HA的光谱和电子跃迁的机制提出了新的依据,结果表明,吸收带I产生于π-π*跃迁,吸收带Ⅱ和Ⅲ产生于P-π共轭所导致的L→aπ跃迁的电子振动结构;荧光发射带I和Ⅱ是产生于同一跃迁机制S1(L,aπ)→S0的正常荧光的振动结构。