α''-取代磺酰基-α,β-不饱和酮的不对称催化环加成反应的研究

在手性金属钛配合物催化剂存在下，研究了α′－取代磺酰基－α，β－不饱和酮的不对称催化环加成反应；讨论了α，β－不饱和酮各种取代磺酰基对反应活性和对映选择性的影响；高收率地合成了高光学纯度的环加成产物，并对环加成产物的构型进行了鉴定。     

水杨醛肟铜络合物中性载体高选择性水杨酸根电极的研究

采用合成的Schiff碱金属络合物水杨醛肟铜(Ⅱ)、锌(Ⅱ)、镍(Ⅱ)为中性载体制备阴离子选择性电极。结果表明水杨醛肟铜(Ⅱ)对水杨酸根(Sal-)具有高选择性及优良的电位响应性能,电极呈现反Hofmeister选择性行为,其选择性次序为Sal->ClO4->SCN->I->NO2->NO3->Br->Cl->OAc->SO42-。采用交流阻抗技术和紫外可见光谱技术研究了电极的响应机理。该电极具有响应快、重现性好、检出限低和制备简单等优点。将电极用于药品及人体尿液分析,结果令人满意。     

快速气相色谱法测定食用油中的未衍生化长链脂肪酸

建立了利用短的微径色谱柱直接测定食用油中未衍生化长链脂肪酸的快速气相色谱方法。C12~C22脂肪酸在2 min之内实现基线分离，定量标准曲线的相关系数大于0.988，最低检测限（S/N=3）为2.80~9.60 mg/L,回收率为74.5%~86.5%。该方法快速、简便、准确，分析通量大，已成功地用于香油、色拉油及调和油等3种食用油中长链脂肪酸含量的测定。     

An Efficient and Green Synthesis of 5-Oxo-5, 6, 7, 8-tetrahydro- 4H-benzo-[b]-pyran Derivatives Promoted by InCl_3·4H_2O Under Microwave Irradiation

Construction of tetrahydropyran rings has attracted a great deal of interests in organic synthesis in recent years1, since tetrahydropyran moiety constitutes a structural unit in a number of natural products2. In addition, tetrahydropyran derivatives possess wide range of biological activities and pharmacological properties, such as anticancer activity3 and antihypersensitivity4. Many methods for the preparation of such compounds have already been developed5. Among them, condensation of α, β…     

The Adsorption of NOx on Magnesium Aluminium Hydrotalcite

Magnesium aluminium hydrotalcite (Mg-Al-HT) with molar ratio of Mg-to-Al of 3 to 1 was prepared and characterized by X-ray diffraction (XRD) and infrared spectra (IR). The performances of Mg-Al-HT for the adsorption and desorption of NOx were studied. The results indicated that the adsorption capacity of the hydrotalcite for NOx was 1398.2mg/g, and it was higher than the acticarbon‘s. The adsorption capacities depended on adsorption time and temperature.Mg-Al-HT could be regenerated by thermal decomposition, and the adsorption efficiency had not changed markedly after three cycles.     

预处理条件对Zn/Al-CLM的丙烷芳构化性能的影响

在脉冲微反装置上考察了不同的预处理条件对Zn/Al-CLM催化剂的丙烷芳构化反应的影响。结果表明，丙烷在Zn/Al-CLM催化剂上具有一定的的反应活性和芳烃选择性，而且芳构化主要转化为苯；载体Al-CLM的焙烧温度、金属锌负载量、活化温度等对Zn/Al-CLM催化剂的丙烷芳构化性能具有重要影响。载体经500℃预焙烧制备的Zn/Al-CLM催化剂具有最好的柱结构保留度，从而表现出最佳的芳构化性能；随着锌含量的增加，Zn/Al-CLM催化剂的酸量增大，从而使丙烷转化率增大，而选择性则是锌含量质量分数为5．8％时具有极大值；400℃活化处理可使Zn与Al-CLM之间具有适中的相互作用，从而使得Zn/Al-CLM具有较高的芳烃收率。     

Cu/TiO2-NiO上光促表面催化CO2和H2O合成CH3OH反应规律

采用溶胶-凝胶法制备了n(电子型)-p(空穴型) 复合半导体材料0.5％Cu/TiO2-2.0％NiO (w),利用X射线衍射(XRD)、透射电镜(TEM)、红外光谱(IR)、紫外-可见光漫反射(UV-Vis)、程序升温脱附(TPD)技术对材料结构、吸光性能、化学吸附性能进行了表征,研究了该材料对CO2和H2O合成CH3OH的光促表面催化反应(PSSR)规律.结果表明,所制备材料能够明显促进目的反应,室温条件下即有CH3OH生成.在200 ℃下,由于光-表面-热的协同效应,CO2转化率得以提高,且CH3OH的选择性达到87.5％ .根据实验结果,得出CO2在材料表面的卧式吸附态为CH3OH的前驱物,并对PSSR机理进行了讨论.     

合成2—芳氧基—5—氟—3H—4—嘧啶酮的新方法

由２－氰－５－氟－３Ｈ－４－嘧啶酮和取代苯酚钠在常压下反应，合成了７个未见文献报道的２－芳氧基－５－氟－３Ｈ－４－嘧啶酮化合物，产率７０￣８７％，结构经ＩＲ、＾１Ｈ ＮＭＲ和ＭＳ证实。     

A concise synthesis of anti-viral agent F-ddA, starting from (S)-dihydro-5-(hydroxymethyl)-2(3H)-furanone

Anti-HIV agent β-F-ddA (1) has been synthesized starting from readily available non-sugar, (S)-(+)-Dihydro-5-(hydroxymethyl)-2-(3H)-furanone (4). A highly syn-stereoselective fluorination of the hydroxy lactone 2 generates the key intermediate fluorolactone 5 in a short and concise synthetic sequence. Reduction of 5 followed by bromination generates the aglycon which is glycosylated to generate F-ddA by amination and deprotection. Steric bulk of the 5-protecting group has minimal effect on the steric course of glycosylation.     

聚酯-聚酯多嵌段共聚物的合成及其动态力学性能

聚酯-聚醚多嵌段共聚物的动态力学性能谱上有两个T_8,不宜做阻尼材料。本文报道聚对苯二甲酸乙二醇酯(PET)-端羟基聚己二酸乙二醇酯(PEA)共聚物(简称嵌段共聚酯),比聚醚-聚酯多嵌段共聚物有更好的相容性。我们研究了PEA的分子量,间苯二甲酸的用量对嵌段共聚酯的结晶度,以及结晶度对嵌段共聚酯的动态力学性能的影响。