基于环境星CCD数据的环境植被指数及叶面积指数反演研究

利用PROSAIL前向模型模拟的植被冠层光谱,在植被指数构造时,引入修正大气、土壤背景影响的蓝、绿波段,构建了避免过早饱和的环境植被指数(environmental vegetation index,EVI)。基于多个典型冬小麦生育期的地面观测数据,建立基于EVI-LAI长时间序列反演模型,并对模型进行不同品种间的交叉检验。研究表明,EVI建立的叶面积指数(leaf area index,LAI)反演模型精度优于同类植被指数模型,并具有较好的普适性,能应用于冬小麦遥感多时相长势监测及LAI反演。     

射流影响下气固两相流动试验的定量分析

为了研究受限空间内的射流影响下的气固两相流动,本文采用数码颗粒图像测速仪（DpIV）系统测量颗粒分布,并开发了一套用于处理DPIV颗粒图片的算法,可用于准确地定量分析通道内的颗粒分布。使用该算法能够获得颗粒在拍摄平面内的二维相对浓度数据,定量分析该数据发现,在同样的流场条件下,射流对气流场和不同粒径颗粒的影响区域存在明...     

有机/无机复合功能材料倒脊型波导热光开关

利用溶胶-凝胶技术自主合成了一种具有优良光学特性和高热稳定性的有机/无机复合芯层材料.这种功能材料的分子中含有有机柔性侧链,可形成环氧交联.与无机SiO2-TiO2体系相比,具有较高的热光系数(量级为10-4/K),以及更好的成膜性和可加工性.通过与实验室自行配制的P(MMA-GMA)包层材料相匹配,设计制备了基于这种有机/无机复合功能材料的倒脊型波导马赫-曾德尔型热光开关.器件的波导与热电极性能良好.插入损耗为10dB,驱动功率15mW,开关时间小于1ms,消光比15dB.     

Low-frequency and broad band metamaterial absorber: design, fabrication, and characterization

We report a metamaterial absorber (MA) with a broad absorption band in the frequency region of 2–4 GHz, whose thickness is not limited to the quarter-wavelength. Theoretical and experimental results show that the absorber has two adjacent absorption apexes at 2.24 and 3.46 GHz, respectively, which are both related to the electric and magnetic resonances of the metamaterial. The absorption is over 68% in the whole wave band of 2–4 GHz provided the thickness of 4 mm. The distributions of the surface currents and the power loss density indicate that the surface currents produced by the electric and magnetic resonances are strongly consumed by the resistive patches. This low-frequency absorber has potential applications in many scientific and martial fields.     

重频XeF蓝绿激光技术

 利用表面放电光泵浦技术,研制了重频XeF(C-A)激光器,运行频率达到10 Hz。研究了运行频率、气体流量对激光输出能量稳定性的影响,分析了影响输出稳定性的主要因素,实验结果表明,提高气流量可有效改善重频输出能量的稳定性。同时,还给出了优化实验条件下不同运行频率连续20个脉冲较为理想的输出结果。运行频率分别为1,2,5 Hz时,输出能量稳定性较好,输出能量大于4.0 J;气流量大于53 L/s时,10 Hz重频运行的输出稳定性已显著提高,平均输出能量也达到1.8 J。     

A novel method for improving the adhesion strength of the electrodeposited Ni films in MEMS

Adhesion performance of MEMS materials is increasingly important with the widely use of miniaturized devices. This paper proposed a novel method for improving adhesion performance between electrodeposited Ni multi-layers. The new method is to treat the Ni substrate in nickel chloride plating solution by pulse reverse current technique before electrodeposition. The dense oxide film of Ni substrate can be removed effectively by this electrochemical method, meanwhile, the proper roughness of Ni substrate is in favor of epitaxial growth during electrodeposition. Moreover, the Ni film is electrodeposited by the new method with low stress and coarse crystal grain. Consequently, the adhesion performance of Ni films is improved dramatically. The experimental results show that the adhesion performance of Ni film electrodeposited by the new method is about 3 times that of by traditional method.     

Wave optics simulation approach for high-power laser beam combination

A numerical wave optics approach for simulating multiplex super Gaussian beam combination in high-power laser facility is presented. The approach involves the application of a sequence of random phase screens and von Karman turbulence phase to an initial beam field and the summation of the intensity results. The analytical and numerical calculation results have been given to illustrate the properties of the resulting far-field pattern after coherent, incoherent and spatially coherent combination, and some of that are compared with experimental results. The approach can be used for modeling and evaluating applications such as high-power laser shooting that might utilize different beams combining approach.     

Lattice Boltzmann simulation of liquid–vapor system by incorporating a surface tension term

In this study,we investigate the pseudopotential multiphase model of lattice Boltzmann method(LBM)and incorporate a surface tension term to implement the particle interaction force.By using the Carnahan–Starling(CS)equation of state(EOS)with a proper critical pressure–density ratio,a density ratio over 160000 is obtained with satisfactory numerical stability.The added surface tension term offers a flexible choice to adjust the surface tension strength.Numerical tests of the Laplace rule are conducted,proving that smaller spurious velocity and better numerical stability can be acquired as the surface tension becomes stronger.Moreover,by wall adhesion and heterogeneous cavitation tests,the surface tension term shows its practical application in dealing with problems in which the surface tension plays an important role.     

光谱型椭偏仪精确表征非晶吸收薄膜的光学常数

采用光谱型椭偏仪(SE)和分光光度计分别测量了超薄类金刚石(DLC)薄膜和非晶硅(a-Si)薄膜的椭偏参数(y和D)和透射率T。由于薄膜的厚度与折射率、消光系数之间存在强烈的相关性,仅采用椭偏参数拟合,难以准确得到薄膜的光学常数。如果加入透射率同时进行拟合(以下简称SE+T法),可简单、快速得到薄膜的厚度和光学常数。但随机噪声、样品表面的轻微污染或衬底上任何小的吸收都可能影响SE+T法拟合的光学常数的准确性。因此将SE+T法和光学常数参数化法联用,实现DLC、a-Si薄膜光学常数的参数化,以消除测量数据中的噪声对光学常数的影响。结果显示,联用时的拟合结果具有更好的唯一性,而且拟合得到的光学常数变得平滑、连续且符合Kramers-Kronig(K-K)关系。这种方法特别适合于精确表征厚度仅为几十纳米的非晶吸收薄膜的光学常数。     

近红外“3R”法双谱自适应去噪

针对近红外透射和吸收双光谱提出一种自适应的去噪方法。同步采集样品的近红外透射谱和吸收谱,在相同分解原则下总体经验模态法分解两组光谱,得到单组分特征模态分量。计算特征模态分量与原透射谱、吸收谱之间相关性,以及两组特征模态分量之间相关性,相关性最小模态分量初判为噪声分量。分析该分量在光谱中点处自相关性,若中点处很大,其他点几乎为零或很小,可以判断该分量为噪声。这种基于模态分量相关性的噪声判别方法称为“3R”法则。剔除噪声分量,重构光谱信号,循环上述分解过程,直到不满足“3R”法则,降噪过程结束。构造理想光谱,叠加噪声,“3R”法降噪效果优于EMD和EEMD低通滤波器,略逊于小波分解。真实光谱实验中,经过上述方法降噪处理过的玉米叶片光谱采用3层BP神经网络建立与叶绿素之间预测模型,“3R”法处理模型具有最大校正相关系数和预测相关系数,最小校正标准差和预测标准差。在四种降噪方法中,“3R”法对光谱谱峰位置和峰高的影响最小。实验表明,“3R”双谱去噪方法无需预设迭代次数,不用考虑分解层数,没有基函数,是自适应的,该方法适合近红外光谱去噪。