Synthesis of cysteamine-coated CdTe quantum dots and its application in mercury (II) detection

High-quality cysteamine-coated CdTe quantum dots (CA-CdTe QDs) were successfully synthesized in aqueous phase by a facile one-pot method. Through hydroxylamine hydrochloride-promoted kinetic growth strategy, water-soluble CA-CdTe QDs could be obtained conveniently in a conical flask by a stepwise addition of raw materials. The photoluminescence quantum yield (PL QY) of the obtained QDs reached 9.2% at the emission peak of 520 nm. The optical property and the morphology of the QDs were characterized by UV–vis absorption spectra, photoluminescence spectra (PL) and transmission electron microscopy (TEM) respectively. Furthermore, the fluorescence of the resultant QDs was quenched by copper (II) (Cu²⁺) and mercury (II) (Hg²⁺) meanwhile. It is worthy of note that to separately detect Hg²⁺, cyanide ion could be used to eliminate the interference of Cu²⁺. Under the optimal conditions, the response was linearly proportional to the logarithm of Hg²⁺ concentration over the range of 0.08–3.33 μM with a limit of detection (LOD) of 0.07 μM.     

Finite time chaos control for a class of chaotic systems with input nonlinearities via TSM scheme

This paper investigates nonsingular terminal sliding mode control for a class of uncertain systems with nonlinear inputs and its application in chaos control. When some of the system states are finite-time stable, the nonlinear items that coupled with these states may come into zeros in other subsystems. This will simplify the stability analysis of the whole system greatly. Compared with the traditional finite-time stabilization design method, the introduction of the terminal sliding mode can reduce the input dimensions. Only one control input is requested to realize chaos control of the Liu system when unmatched uncertainties and input nonlinearity coexist. The parameter matrices in the TSM can be determined through the solution of LMIS. Simulation results are given to demonstrate the effectiveness of the proposed method.     

Enantioselective iridium-catalyzed hydrogenation of α-arylcinnamic acids and synthesis of (S)-equol

By using iridium catalyst based on chiral spiro phosphine–oxazoline ligands, the hydrogenation of α-arylcinnamic acids was accomplished under ambient pressure and low catalyst loading (as low as 0.01 mol %), providing useful 2,3-diarylpropionic acids in high yields with excellent enantioselectivities (up to 99% ee). A catalytic enantioselective synthesis of (S)-equol with the present hydrogenation reaction as a key step was accomplished starting from commercially available starting materials in six steps with 48.4% overall yield.     

Modeling,nonlinear dynamic analysis and control of fractional PMSG of wind turbine

This study aims to reveal the laws of the relationship between fractional-order system and integer-order system. Meanwhile, delayed feedback control is introduced to control the fractional-order PMSG (permanent magnet synchronous generator) model of a wind turbine. First, the fractional-order mathematical model of PMSG is established. Next, numerical simulations under different system orders are given and the system dynamic behaviors are analyzed in detail. Then, the delayed feedback control method is introduced to control the fractional-order PMSG and the control results when different parameters vary are analyzed. Complex dynamics are presented and some interesting phenomena are discovered. It is found that the system order influences the dynamics of the system in many aspects such as chaos pattern, bifurcation behavior, period window, shape and size of strange attractor. The delayed time, feedback gain, feedback limitation, system order can obviously influence the control result except the initial state of the system. Moreover, the feedback limitation has a minimum to successfully control the system to stable states and the system order also has a maximum to do so.     

Direct Hydraulic Parameter and Function Estimation for Diverse Soil Types Under Infiltration and Evaporation

A new computationally efficient direct method is applied to estimating unsaturated hydraulic properties during steady-state infiltration and evaporation at soil surface. For different soil types with homogeneous and layered heterogeneity, soil hydraulic parameters and unsaturated conductivities are estimated. Unlike the traditional indirect inversion method, the direct method does not require forward simulations to assess the measurement-to-model fit; thus, the knowledge of model boundary conditions (BC) is not required. Instead, the method employs a set of local approximate solutions to impose continuity of pressure head and soil water fluxes throughout the inversion domain, while measurements act to condition these solutions. Given sufficient measurements, it yields a well-posed system of nonlinear equations that can be solved with optimization in a single step and is thus computationally efficient. For both Gardner’s and van Genuchten’s soil water models, unsaturated hydraulic conductivities and pressure heads (including the unknown BC) can be accurately recovered. When increasing measurement errors are imposed, inversion becomes less accurate, but the solution is stable, i.e., estimation errors remain bounded. Moreover, when the unsaturated conductivity model is known, inversion can recover its parameters; if it is unknown, inversion can recover a nonparametric, piecewise continuous function to which soil parameters can be obtained via fitting. Overall, inversion accuracy of the direct method is influenced by (1) measurement density and errors; (2) rate of infiltration or evaporation; (3) variation of the unsaturated conductivity; (4) flow direction; (5) the number of soil layers.     

Polarized spectral properties of Nd3+ ions in CaYAlO4 crystal

Nd:CaYAlO₄ single crystal has been grown by the Czochralski technique. The cell parameters were analyzed with X-ray diffraction (XRD). The polarized absorption spectra, the polarized fluorescence spectra, and the fluorescence decay curve of the crystal were measured at room temperature. The spectroscopic parameters were determined by Judd–Ofelt theory and Fuchtbauer–Ladenburg formula. The effective intensity parameters Ω ₂, Ω ₄, and Ω ₆ were obtained to be 2.19, 8.16, and 8.57×10^?20 cm², respectively. The calculated radiative probabilities, branching ratios, and radiative lifetime were also evaluated for the ⁴F_3/2 excited state using the calculated intensity parameters. The results indicate Nd:CaYAlO₄ has potential as a laser gain medium for ultrashort laser system.     

低β 162.5 MHz taper型HWR腔的机械性能分析（英文）

北京大学正在设计β=0.09,频率为162.5 MHz taper型的二分之一波长射频超导谐振腔(HWR腔),这种腔针对高流强质子束(约100mA)和氘束(约50mA)的加速而设计。对于这种超导腔而言机械性能分析是十分重要的,可以通过机械性能分析来估计由于腔体的形变带来的频率偏移。用ANSYS分析了由于液氦压力不稳定造成的麦克风效应以及洛伦兹力造成的腔体失谐,并且对沿腔体轴线方向的调谐进行了分析。模拟结果显示这只腔压力敏感系数为31.1 Hz/kPa,洛伦兹力系数为-0.41Hz/(MV·m~(-1))~2。腔体的调谐范围达到±177kHz,足够补偿腔体可能的频率偏移。腔体的机械性能满足腔体正常运行的要求。     

The Structural Fate of Individual Multicomponent Metal‐Oxide Nanoparticles in Polymer Nanoreactors

Multicomponent nanoparticles can be synthesized with either homogeneous or phase‐segregated architectures depending on the synthesis conditions and elements incorporated. To understand the parameters that determine their structural fate, multicomponent metal‐oxide nanoparticles consisting of combinations of Co, Ni, and Cu were synthesized by using scanning probe block copolymer lithography and characterized using correlated electron microscopy. These studies revealed that the miscibility, ratio of the metallic components, and the synthesis temperature determine the crystal structure and architecture of the nanoparticles. A Co‐Ni‐O system forms a rock salt structure largely owing to the miscibility of CoO and NiO, while Cu‐Ni‐O, which has large miscibility gaps, forms either homogeneous oxides, heterojunctions, or alloys depending on the annealing temperature and composition. Moreover, a higher‐ordered structure, Co‐Ni‐Cu‐O, was found to follow the behavior of lower ordered systems.