基于EKF的水下LD通信精对准控制算法

高速激光通信中接收机与光斑中心很难处于精对准状态,导致水下光通信链路难以稳定建立.首先采用蒙特卡洛仿真统计法分析激光光子在海水中传输的接收光强分布规律,再通过实验对接收端的光斑图像进行采样分析,利用曲线拟合得到接收器位置与接收光强的关系.仿真与实验结果表明:光束经过25 m的水下传输,接收光强分布仍近似为高斯分布.采用非线性估计算法(扩展卡尔曼滤波)与基本状态控制反馈理论,根据接收光强度估计接收器当前位置与最大光强处的距离,通过反馈算法实现接收端与光斑中心的主动跟踪对准.算法仿真结果显示,接收端对准误差在2 mm以下,稳定后接收效率超过98%.     

GaInP/GaAs/Ge三结太阳电池不同能量质子辐照损伤模拟

以GaInP/GaAs/Ge三结太阳电池为研究对象,开展了能量为0.7, 1, 3, 5, 10 MeV的质子辐照损伤模拟研究,建立了三结太阳电池结构模型和不同能量质子辐照模型,获得了不同质子辐照条件下的I-V曲线,光谱响应曲线,结合已有实验结果验证了本文模拟结果,分析了三结太阳电池短路电流、开路电压、最大功率、光谱响应随质子能量的变化规律,利用不同辐照条件下三结太阳电池最大输出功率退化结果,拟合得到了三结太阳电池最大输出功率随位移损伤剂量的退化曲线.研究结果表明,质子辐照会在三结太阳电池中引入位移损伤缺陷,使得少数载流子扩散长度退化幅度随质子能量的减小而增大,从而导致三结太阳电池相关电学参数的退化随质子能量的减小而增大.相同辐照条件下,中电池光谱响应退化幅度远大于顶电池光谱响应退化幅度,中电池抗辐照性能较差,同时中电池长波范围内光谱响应的退化幅度比短波范围更大,表明中电池相关电学参数的退化主要来源于基区损伤.     

Multicaloric and coupled-caloric effects

The multicaloric effect refers to the thermal response of a solid material driven by simultaneous or sequential application of more than one type of external field.For practical applications,the multicaloric effect is a potentially interesting strategy to improve the efficiency of refrigeration devices.Here,the state of the art in multi-field driven multicaloric effect is reviewed.The phenomenology and fundamental thermodynamics of the multicaloric effect are well established.A number of theoretical and experimental research approaches are covered.At present,the theoretical understanding of the multicaloric effect is thorough.However,due to the limitation of the current experimental technology,the experimental approach is still in progress.All these researches indicated that the thermal response and effective reversibility of multiferroic materials can be improved through multicaloric cycles to overcome the inherent limitations of the physical mechanisms behind single-field-induced caloric effects.Finally,the viewpoint of further developments is presented.     

Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

Laser powder bed fusion(LPBF),like many other additive manufacturing techniques,offers flexibility in design expected to become a disruption to the manufacturing industry.The current cost of LPBF process does not favor a try-anderror way of research,which makes modelling and simulation a field of superior importance in that area of engineering.In this work,various methods used to overcome challenges in modeling at different levels of approximation of LPBF process are reviewed.Recent efforts made towards a reliable and computationally effective model to simulate LPBF process using finite element(FE)codes are presented.A combination of ray-tracing technique,the solution of the radiation transfer equation and absorption measurements has been used to establish an analytical equation,which gives a more accurate approximation of laser energy deposition in powder-substrate configuration.When this new analytical energy deposition model is used in in FE simulation,with other physics carefully set,it enables us to get reliable cooling curves and melt track morphology that agree well with experimental observations.The use of more computationally effective approximation,without explicit topological changes,allows to simulate wider geometries and longer scanning time leading to many applications in real engineering world.Different applications are herein presented including:prediction of printing quality through the simulated overlapping of consecutive melt tracks,simulation of LPBF of a mixture of materials and estimation of martensite inclusion in printed steel.     

Influence of external load on friction coefficient of Fe-polytetrafluoroethylene

A coarse-grained molecular dynamics simulation model was developed in this study to investigate the friction process occurring between Fe and polytetrafluoroethylene(PTFE).We investigated the effect of an external load on the friction coefficient of Fe–PTFE using the molecular dynamics simulations and experimental methods.The simulation results show that the friction coefficient decreases with the external load increasing,which is in a good agreement with the experimental results.The high external load could result in a larger contact area between the Fe and PTFE layers,severer springback as a consequence of the deformed PTFE molecules,and faster motion of the PTFE molecules,thereby affecting the friction force and normal force during friction and consequently varying the friction coefficient.     

In-situ SiN combined with etch-stop barrier structure for high-frequency AlGaN/GaN HEMT

The etch-stop structure including the in-situ SiN and AlGaN/GaN barrier is proposed for high frequency applications.The etch-stop process is realized by placing an in-situ SiN layer on the top of the thin AlGaN barrier.F-based etching can be self-terminated after removing SiN,leaving the AlGaN barrier in the gate region.With this in-situ SiN and thin barrier etch-stop structure,the short channel effect can be suppressed,meanwhile achieving highly precisely controlled and low damage etching process.The device shows a maximum drain current of 1022 mA/mm,a peak transconductance of 459 mS/mm,and a maximum oscillation frequency(fmax)of 248 GHz.     

氢原子束在大气长程传输中的剥离效应

考虑到中性粒子束对近地轨道太空垃圾的清理作用以及在太空探索中的潜在应用前景,研究了中性粒子束在亚轨道空间长程传输过程中影响束流能量和密度损失的主要物理机制,重点分析了剥离效应对束流损耗的影响。中性束剥离效应包括束流粒子之间碰撞导致的自剥离效应和其与大气粒子碰撞导致的剥离效应。以束密度随传播距离变化的方程为基础,通过引用几何因子来表征束流的自剥离效应强度,建立了剥离效应机制下束流的传输模型,由此评估了束流自剥离效应在中性束长程传输中对传输距离的影响关系。研究结果表明,在固定的高度,当中性束密度大于空气粒子密度时,自剥离效应的影响将非常突出,随着传输高度的升高,即使束密度和空气密度同时降低维持量级一致,自剥离效应对传输距离的影响在大几何因子的情况下仍会增强。     

Spectrum of Single-Photon Scattering in a Strong-Coupling Hybrid Optomechanical System

The single-photon excitation and transmission spectra of strong-coupling hybrid optomechanics are theoretically analyzed, where a two-level system (TLS) is coupled to a mechanical resonator (MR), generating Jaynes–Cummings-type polariton doublets. In this model, both the optomechanical coupling and the TLS-MR coupling are strong. In this parameter region, polaron-assisted excitation reemission processes can strongly affect the single-photon excitation and output spectra of the cavity. It is found that the fine structure around each sideband can be used to characterize the TLS-MR and the effective TLS-photon couplings, even at the single-quantum level. Thus, the spectrum structures may make it possible to sensitively probe the quantum nature of a macroscopic mechanical element. A possible approach for tomographic reconstruction of the state of a TLS, utilizing the single-photon transmission spectra, is further provided.     

Noninvasive Temperature Measurement in Dental Materials Using Nd3+, Yb3+ Doped Nanoparticles Emitting in the Near Infrared Region

In this work, the application of near infrared (NIR)-emitting NaYbF₄:1%Tm³⁺@NaLuF₄:30%Nd³⁺ core–shell nanoparticles is reported for noninvasive probing and monitoring the temperature during photopolymerization of dental materials. When excited at 808 nm, the synthesized nanoparticles emit NIR photoluminescence (PL) with two distinctive peaks at 865 and 980 nm which correspond to radiative transitions from the doped Nd³⁺ and Yb³⁺ ions, respectively. Luminescence intensity ratio between these two bands is found to vary with temperature due to temperature-dependent electronic excitation energy transfer between Nd³⁺ and Yb³⁺ ions at the core/shell interface. This finding allows luminescence ratiometric evaluation of the in situ temperature during photopolymerization of resin cement (doped with nanoparticles) in a veneer placement procedure. In addition, the NIR emission also enables PL imaging of the distribution of the adhesive under the veneer. The results highlight that rare-earth ions–doped nanoparticles with both excitation and emission in the NIR spectral range are advantageous for both PL-based nanothermometry and imaging due to the reduced attenuation of NIR light by dental ceramics.     

声轨道角动量水下发射与数据传输实验

研究了声轨道角动量水下发射技术与多路复用的水下数据传输,基于点源理论推导了相控圆周阵列发射声轨道角动量的基本原理,分析了干扰项的阶数成分及干扰项对主项的影响,优化设计了基于Cymbal换能器的阵列样机,阵列样机直径为Φ180 mm,阵元数为10元,工作频率为25 kHz,通过对阵列阵元的相位调控实现了-3至3六阶声轨道角动量的发射,验证了基于相控原理实现不同拓扑荷数声轨道角动量发射的理论。通过利用各阶声轨道角动量的开关状态进行数据编码,进行了基于声轨道角动量多路复用的水下数据传输实验,实验结果表明,不同拓扑荷数的声轨道角动量具有良好的正交性质,可以利用基于声轨道角动量的多路复用技术实现水下数据传输功能。