Highly porous CuO/MnO2 catalyst prepared by gas release-assisted technology and its enhancement of formaldehyde removal efficiency

Research on Chemical Intermediates - A porous CuO/MnO2 catalyst was synthesized by a gas release-assisted method. Due to the participation of gases (H2O, NH3, CO2) released from ammonia and...     

4-Phosphoryl Pyrazolones for Highly Selective Lithium Separation from Alkali Metal Ions

Effective receptors for the separation of Li⁺ from a mixture with other alkali metal ions under mild conditions remains an important challenge that could benefit from new approaches. In this study, it is demonstrated that the 4-phosphoryl pyrazolones, H L ²-H L ⁴, in the presence of the typical industrial organophosphorus co-ligands tributylphosphine oxide (TBPO), tributylphosphate (TBP) and trioctylphosphine oxide (TOPO), are able to selectively recognise and extract lithium ions from aqueous solution. Structural investigations in solution as well as in the solid state reveal the existence of a series of multinuclear Li⁺ complexes that include dimers (TBPO, TBP) as well as rarely observed trimers (TOPO) and represent the first clear evidence for the synergistic role of the co-ligands in the extraction process. Our findings are supported by detailed NMR, MS and extraction studies. Liquid-liquid extraction in the presence of TOPO revealed an unprecedented high Li⁺ extraction efficiency (78 %) for H L ⁴ compared to the use of the industrially employed acylpyrazolone H L ¹ (15 %) and benzoyl-1,1,1-trifluoroacetone (52 %) extractants. In addition, a high selectivity for Li⁺ over Na⁺, K⁺ and Cs⁺ under mild conditions (pH ∼8.2) confirms that H L ²-H L ⁴ represent a new class of ligands that are very effective extractants for use in lithium separation.     

高分散Co0.2Ni1.6Fe0.2P助催化剂改性P掺杂g-C3N4纳米片高效光催化析氢的研究

随着化石燃料使用的增加和温室气体排放量持续上升,20世纪以来气温上升得更快。开发环境友好型能源取代传统化石燃料是当务之急。氢能源作为一种清洁、高效的能源,被认为是最有希望取代传统化石燃料的能源。光催化水分解水产氢作为为一种环保型技术被认为是最有前景的氢能生产方法。提高光生电子-空穴对分离效率是构建高效光催化剂的关键。然而,利用高度分散的助催化剂构建高效、稳定的产氢光催化剂仍然是一个挑战。本文首次成功地采用一步原位高温磷化法制备了高度分散的非贵金属三金属过度金属磷化Co_0.2Ni_1.6Fe_0.2P助催化剂(PCNS-CoNiFeP)掺杂P的石墨相氮化碳纳米片(PCNS)。有趣的是,PCNS-CoNiFeP与传统氢氧前驱体磷化法制备的CoNiFeP相比,没有聚集性,分散性高。X射线衍射(XRD)、X射线光电子能谱(XPS)、元素映射图像和高分辨率透射电镜(HRTEM)结果表明,PCNS-CoNiFeP已成功合成。紫外-可见吸收光谱结果表明,PCNS-CoNiFeP在200–800 nm波长范围内较PCNS略有增加。光致发光光谱、电化学阻抗谱(EIS)和光电流分析结果表明,CoNiFeP助催化剂能有效促进光生电子-空穴对的分离,加速载流子的迁移。线性扫描伏安法(LSV)结果还表明,负载CoNiFeP助催化剂可大大降低CNS的过电位。结果表明,以三乙醇胺溶液为牺牲剂的PCNS-CoNiFeP最大产氢速率为1200 μmol·h^-1·g^-1,是纯CNS-Pt (320 μmol·h^-1·g^-1)的4倍。在420 nm处的表观量子效率为1.4%。PCNS-CoNiFeP在光催化反应中也表现出良好的稳定性。透射电镜结果表明,6–8 nm的CoNiFeP高度分散在PCNS表面。高度分散的CoNiFeP比聚集的CoNiFeP具有更好的电荷分离能力和更高的电催化析氢活性。由此可见,聚合的CoNiFeP-PCNs (300 μmol·h^-1·g^-1)的产氢速率远低于PCNS-CoNiFeP。此外,CNS的P掺杂可以改善其电导率和电荷传输。     

聚3-己基噻吩：非富勒烯太阳能电池中的量子效率损失和电压损失

聚3-己基噻吩(P3HT)以其合成工艺简单、成本低廉的优势,成为有机光伏领域中最具吸引力的电子给体材料之一。然而,目前P3HT: 非富勒烯太阳能电池的光伏性能仍然较差。在本工作中,我们证明了与P3HT: 富勒烯太阳能电池相比,较快的电荷转移态的非辐射衰减速率(K_nr)是导致P3HT: 非富勒烯太阳能电池中较低的量子效率和较高的电压损失的原因。然后,我们研究了基于非富勒烯受体ZY-4Cl的太阳能电池的工作机理。研究结果表明与P3HT: 非富勒烯体系相比,P3HT: ZY-4Cl中K_nr的降低改善了器件的量子效率,同时降低了电压损失。K_nr降低的原因可以部分归因于电荷转移态能量的增加。此外,给体分子和受体分子之间的距离(DA间距)的增大也是K_nr减少的重要原因。因此,我们得出结论：为了提高P3HT太阳能电池的性能,需进一步降低器件的K_nr,这可通过增加活性层中的DA间距来实现。     

Hydrothermal synthesis and electrochemical performance of Fe-doped Co hydroxide electrode materials

Journal of Solid State Electrochemistry - In order to meet the growing energy demand, it is of great significance to develop high-performance electrochemical energy storage materials. In this...     

Parameter optimization and performance study of Ni–P coatings prepared by pulse-assisted jet electrochemical deposition

Journal of Solid State Electrochemistry - Jet electrochemical deposition is a relatively new technology for selective electrochemical deposition. Its advantages include high deposition accuracy and...     

Effect of Co-catalyst CdS on the Photocatalytic Performance of ZnMoO4 for Hydrogen Production

Zinc molybdate (ZnMoO₄), a layer perovskite material, has the advantages of high stability, excellent optical and charge properties. However, its high band gap and high electron–hole recombination efficiency limit its application in the photocatalytic reduction field like hydrogen production. In this study, we used CdS as a co-catalyst and successfully prepared CdS/ZnMoO₄ composite photocatalysts with different loadings. The hydrogen evolution rate of CdS/ZnMoO₄ reached 530.2 µmol h^?1 g^?1, which was approximately 11 and 100 times more than rates of pure CdS and ZnMoO₄ under the same conditions, respectively. It is the presence of CdS that contributed to this improved performance, which acted as an electron acceptor to separate electrons and holes. Besides, a reasonable mechanism was provided based on photoelectrochemical characterizations. CdS loading greatly improved the hydrogen evolution performance of ZnMoO₄ under visible light, providing a direction to improving the performance of perovskite based photocatalysts.

     

Vacuum Ultraviolet Free-Electron Laser Photoionization Mass Spectrometry of Alpha-pinene Ozonolysis

\begin{document}$\alpha$\end{document}-pinene is the most abundant monoterpene that represents an important family of volatile organic compounds. Molecular identification of key transient compounds during the \begin{document}$\alpha$\end{document}-pinene ozonolysis has been proven to be a challenging experimental target because of a large number of intermediates and products involved. Here we exploit the recently developed hybrid instruments that integrate aerosol mass spectrometry with a vacuum ultraviolet free-electron laser to study the \begin{document}$\alpha$\end{document}-pinene ozonolysis. The experiments of \begin{document}$\alpha$\end{document}-pinene ozonolysis are performed in an indoor smog chamber, with reactor having a volume of 2 m\begin{document}$^3$\end{document} which is made of fluorinated ethylene propylene film. Distinct mass spectral peaks provide direct experimental signatures of previously unseen compounds produced from the reaction of \begin{document}$\alpha$\end{document}-pinene with O\begin{document}$_3$\end{document}. With the aid of quantum chemical calculations, plausible mechanisms for the formation of these new compounds are proposed. These findings provide crucial information on fundamental understanding of the initial steps of \begin{document}$\alpha$\end{document}-pinene oxidation and the subsequent processes of new particle formation.     

Enhanced photoactivity of CdS nanorods by MXene and ZnSnO3: Application in photoelectrochemical biosensor for the effect of environmental pollutants on DNA hydroxymethylation in wheat tissues

The photoactivity of CdS nanorods was greatly improved by amino functionalized accordion-like MXene and spherical ZnSnO₃. MXene possesses good electron transfer capability and ZnSnO₃ presents matched energy band with CdS, which deeply accelerate the electron transfer and prevent the recombination of photogenerated electron-hole pair, leading to a strong photoelectrochemical (PEC) response. Taking the merit of the improved photoactivity of CdS nanorods, a novel PEC biosensor was constructed for DNA hydromethylation detection based on immune recognition of target molecule, where 5-hydroxymethyl-2′-deoxycytidine triphosphate (5hmdCTP) was employed as detect target, CdS/MXene was used as photoactive material, and ZnSnO₃ was adopted as signal amplification unit. Under enzymatic covalent reaction of –CH₂OH of 5hmdCTP with –NH₂ of MXene, 5hmdCTP was specifically recognized and captured. Then, taking advantages of the covalent reaction between phosphate group of 5hmdCTP and ZnSnO₃, the signal amplification unit was captured. Under the optimum conditions, this PEC biosensor presents wide linear range of 0.008–100 nM and low detection limit of 4.21 pM (3σ). The applicability of the developed method was evaluated by investigating the effect of Cd²⁺ and perfluorohexane compound pollutant on 5-hydroxymethylcytosine content in the genomic DNA of the roots and leaves of wheat seedlings.