Progress in fluorene-based wide-bandgap steric semiconductors

Molecular bulks are favorable for the thermal and morphological stability in organic wide-bandgap semiconducting polymers with potential applications in both information and energy electronics. In this review, we present our progress in the design of fluorene-based bulky semiconductors with a fractal four-element pattern. Firstly, we established one-pot methods to spirofluorenes, especially spiro[fluorene-9,9′-xanthene](SFX) serving as the next-generation spiro-based semiconductors. Secondly, we observed the supramolecular forces at the bulky groups and discovered the supramolecular steric hindrance(SSH) effect on polymorphisms, nanocrystals as well as device performance. Thus, a synergistically molecular attractor-repulsor theory(SMART) was proposed for the control of nanocrystal morphology, thin film phase and morphology. Thirdly, the third possible type of defects has been identified to generate green band(g-band) emission in widebandgap semiconductors by the introduction of molecular strain design of cyclofluorene. Finally, the first bulky polydiarylfluorene with highly crystalline and β conformation was achieved by an attractor-repulsor design of tadpole-shape monomer, which offered an effective platform to fabricate stable wide-bandgap semiconducting devices. All the discoveries offer the solid basis to break through bottlenecks of organic/polymer wide-bandgap semiconductors by the improvements of overall performances.     

Study on the preparation and mechanical properties of alumina ceramic coating reinforced by graphene and multi-walled carbon nanotube

The paper investigates preparation and mechanical performances of a composite ceramic coating reinforced by graphene and multi-walled carbon nanotube. The carbon nanotube is functionalized with the carboxyl functional group (–COOH) and un-functionalized with sodium dodecyl benzene sulfonate (SDBS). The structure of the functionalized and hybrid-functionalized carbon nanotube is identified using infrared spectroscopy (FTIR analysis). The coating is brushed on the matrix and then cures under temperature lower than 250°C. The morphological and cross section features are studied by scanning electron microscopy (SEM). The distributions of hardness and fracture toughness are determined using a microhardness tester. The adhesive strength is evaluated using a universal tensile tester. The tribological properties are detected using friction wear testing machine. The experimental results show that the structure of the composite coating is compact, and both graphene and hybridtreated carbon nanotube are well dispersed. Addition of 0.2 wt % graphene and 0.2 wt % hybrid-functionalized carbon nanotube results in a prominent increase in hardness and fracture toughness. Meanwhile, the adhesive strength between the composite coating and the metallic substrate is well improved due to the high tensile strength of both graphene and carbon nanotube. Compared with pure alumina coating, the friction coefficient as well as the wear depth and width of grinding crack of the composite coating is much lower.

     

Investigation of mononuclear,dinuclear, and trinuclear transition metal (II) complexes derived from an asymmetric Salamo‐based ligand possessing three different coordination modes

A new asymmetric Salamo‐based ligand H₂L was synthesized using 3‐tert‐butyl‐salicylaldehyde and 6‐methoxy‐2‐[O‐(1‐ethyloxyamide)]‐oxime‐1‐phenol. By adjusting the ratio of the ligand H₂L and Cu (II), Co (II), and Ni (II) ions, mononuclear, dinuclear, and trinuclear transition metal (II) complexes, [Cu(L)], [{Co(L)}₂], and [{Ni(L)(CH₃COO)(CH₃CH₂OH)}₂Ni] with the ligand H₂L possessing completely different coordination modes were obtained, respectively. The optical spectra of ligand H₂L and its Cu (II), Co (II) and Ni (II) complexes were investigated. The Cu (II) complex is a mononuclear structure, and the Cu (II) atom is tetracoordinated to form a planar quadrilateral structure. The Co (II) complex is dinuclear, and the two Co (II) atoms are pentacoordinated and have coordination geometries of distorted triangular bipyramid. The Ni (II) complex is a trinuclear structure, and the terminal and central Ni (II) atoms are all hexacoordinated, forming distorted octahedral geometries. Furthermore, optical properties including UV–Vis, IR, and fluorescence of the Cu (II), Co (II), and Ni (II) complexes were investigated. Finally, the antibacterial activities of the Cu (II), Co (II), and Ni (II) complexes were explored. According to the experimental results, the inhibitory effect was found to be enhanced with increasing concentrations of the Cu (II), Co (II), and Ni (II) complexes.     

一种检测CO32-比率荧光探针的合成及其在细胞成像中的应用

本文设计开发了一种以2,6-二甲酰基对甲苯酚为母体的新型荧光探针HMI,可用于高效识别EtOH-H₂O (8/2, v/v, HEPES 10 mM, pH =7.4)体系中的CO_3^2-。HMI在660 nm处显示发射带,加入CO_3^2-后,在600 nm的等吸收点激发时,原来在660 nm处的荧光淬灭,而以540 nm为中心的新发射带荧光显着增加,为比率型荧光探针。HMI对CO_3^2-表现出高选择性且具有较强的抗干扰能力。此外,荧光探针HMI对CO_3^2-荧光响应的检测限较低,可达到3.938×10^_-6 M。更具有意义的是,HMI探针对CO_3^2-的检测能够在实际水样中起到很好的应用,而且细胞成像研究表明,HMI可用于活体MCF-7细胞中CO_3^2-的成像。     

Minimizing Temperature Bias through Reliable Temperature Determination in Gas-Solid Photothermal Catalytic Reactions

Enormous advances in photothermal catalysis have been made over the years, whereas the temperature assessment still remains controversial in the majority of photothermal catalytic systems. Herein, we methodically uncovered the phenomenon of temperature determination bias arising from prominent temperature differences in gas-solid photothermal catalytic systems, which extensively existed yet has been overlooked in most relevant cases. To avoid the interference of temperature bias, we developed a universal protocol for reliable temperature evaluation of gas-solid photothermal catalytic reactions, with emphasis on eliminating the temperature gradient and temperature fluctuation of catalyst layer via optimizing the reaction system. This work presents a functional and credible practice for temperature detection, calling attention to addressing the effects of temperature differences, and reassessing the actual temperature-based performances in gas-solid photothermal catalysis.     

A Fully Conjugated Covalent Organic Framework with Oxidative and Reductive Sites for Photocatalytic Carbon Dioxide Reduction with Water

Constructing a powerful photocatalytic system that can achieve the carbon dioxide (CO₂) reduction half-reaction and the water (H₂O) oxidation half-reaction simultaneously is a very challenging but meaningful task. Herein, a porous material with a crystalline topological network, named viCOF-bpy-Re, was rationally synthesized by incorporating rhenium complexes as reductive sites and triazine ring structures as oxidative sites via robust −C=C− bond linkages. The charge-separation ability of viCOF-bpy-Re is promoted by low polarized π-bridges between rhenium complexes and triazine ring units, and the efficient charge-separation enables the photogenerated electron–hole pairs, followed by an intramolecular charge-transfer process, to form photogenerated electrons involved in CO₂ reduction and photogenerated holes that participate in H₂O oxidation simultaneously. The viCOF-bpy-Re shows the highest catalytic photocatalytic carbon monoxide (CO) production rate (190.6 μmol g⁻¹ h⁻¹ with about 100 % selectivity) and oxygen (O₂) evolution (90.2 μmol g⁻¹ h⁻¹) among all the porous catalysts in CO₂ reduction with H₂O as sacrificial agents. Therefore, a powerful photocatalytic system was successfully achieved, and this catalytic system exhibited excellent stability in the catalysis process for 50 hours. The structure–function relationship was confirmed by femtosecond transient absorption spectroscopy and density functional theory calculations.     

Photocatalytic Free Radical-Controlled Synthesis of High-Performance Single-Atom Catalysts

Single-atom catalysts (SACs) have emerged as crucial players in catalysis research, prompting extensive investigation and application. The precise control of metal atom nucleation and growth has garnered significant attention. In this study, we present a straightforward approach for preparing SACs utilizing a photocatalytic radical control strategy. Notably, we demonstrate for the first time that radicals generated during the photochemical process effectively hinder the aggregation of individual atoms. By leveraging the cooperative anchoring of nitrogen atoms and crystal lattice oxygen on the support, we successfully stabilize the single atom. Our Pd₁/TiO₂ catalysts exhibit remarkable catalytic activity and stability in the Suzuki–Miyaura cross-coupling reaction, which was 43 times higher than Pd/C. Furthermore, we successfully depose Pd atoms onto various substrates, including TiO₂, CeO₂, and WO₃. The photocatalytic radical control strategy can be extended to other single-atom catalysts, such as Ir, Pt, Rh, and Ru, underscoring its broad applicability.     

Efficient algorithms for wavelength assignment on trees of rings

A fundamental problem in communication networks is wavelength assignment (WA): given a set of routing paths on a network, assign a wavelength to each path such that the paths with the same wavelength are edge-disjoint, using the minimum number of wavelengths. The WA problem is NP-hard for a tree of rings network which is well used in practice. In this paper, we give an efficient algorithm which solves the WA problem on a tree of rings with an arbitrary (node) degree using at most 3L wavelengths and achieves an approximation ratio of 2.75 asymptotically, where L is the maximum number of paths on any link in the network. The 3L upper bound is tight since there are instances of the WA problem that require 3L wavelengths even on a tree of rings with degree four. We also give a 3L and 2-approximation (resp. 2.5-approximation) algorithm for the WA problem on a tree of rings with degree at most six (resp. eight). Previous results include: 4L (resp. 3L) wavelengths for trees of rings with arbitrary degrees (resp. degree at most eight), and 2-approximation (resp. 2.5-approximation) algorithm for trees of rings with degree four (resp. six).     

带干扰的多险种风险模型的破产概率

将多险种风险模型推广到带干扰项的一种新模型,讨论了收益过程的性质,并利用鞅的方法得出了破产概率所满足的Lundberg不等式及其一般公式.     

钝体绕流非定常解

本文结合目前流场显示的研究课题,对方块物体和山形物体的钝体绕流在起动阶段的运动情况,进行相应的数值模拟.并用有限差分方法求解二维不可压缩流体运动的N-S方程的非定常解.对差分格式中的显式,隐式和交替方向隐式几种格式进行了讨论.最后用显式和交替方向隐式方法计算了山形物体和方块物体在起动阶段的运动情况.