变压器寄生参数和负载特性对高压脉冲波形的影响

构建了输出电压幅值为0～20 kV、脉冲重复频率为0.25～20 kHz的双极性高压脉冲电源实验平台,研究了变压器寄生参数与负载特性对输出脉冲波形的影响。采用等效电路复频域解析方法,分析了变压器寄生参数对输出脉冲波形的上升沿、平顶及下降沿的影响规律,并通过改变变压器绕线方案间接验证。发现变压器分布电容和漏感越大,输出脉冲波形上升沿与下降沿越平缓,过冲电压幅值越大,并采用脉冲变压器二次侧均匀密绕、一次侧均匀疏绕、高匝数的方案进行优化。进一步分析了纯阻性、阻容性或阻感性负载特性对输出高压脉冲波形的影响规律,发现电阻值增大（5～50 kΩ）,过冲电压幅值增大,脉冲上升沿和下降沿变陡;当负载电阻回路串联小电容时,过冲电压幅值显著增大,而电容值高于一定值时输出脉冲波形恢复至与纯电阻波形一样;当负载电阻回路串联电感时,输出脉冲波形下降沿变平缓。     

脑电信号的标度分析及其在睡眠状态区分中的应用

脑电信号具有长程幂律相关性及多重分形的标度特性,并随生理病理状态改变.本文首次针对睡眠脑电信号应用单重分形去趋势波动分析(detrended fluctuation analysis,简记为DFA)方法与多重分形奇异谱对睡眠脑电信号的标度特征进行系统的对比研究.发现DFA标度指数α对于不同导联和样本组间的差异较为敏感,随睡眠状态的变化不规律;而多重分形奇异强度区间Δα随睡眠状态的变化更为规律,睡眠Ⅰ期至Ⅳ期不断增大,并且导联间差异和样本组间差异均较小.多重分形Δα参数更适合作为判定睡眠状态的定量参数.     

SXDG-1型汽车前照灯全自动检测仪的微机控制

SXDG—1型汽车前照灯全自动检测仪是用于检测汽车前照大灯光轴的偏斜情况及发光强度并进行定量检验的专用设备。它可以自动测出有关参数,并予以数字显示和打印输出。本文介绍了该仪器的主要性能、工作原理及微机控制系统(包括硬件结构和软件设计思想等)。     

Definitive assignments of the visible-near-IR bands of porphyrin-naphthalocyanine rare-earth sandwich double- and triple-decker compounds by magnetic circular dichroism spectroscopy

A series of heteroleptic rare-earth sandwich complexes [M(Nc)(OEP)] (M = La, Nd, Eu, Dy, and Lu; Nc = 2,3-naphthalocyaninate; OEP = octaethylporphyrinate) have been investigated by electronic absorption and magnetic circular dichroism (MCD) spectroscopy. The electronic absorption spectra of the neutral forms showed two characteristic transitions (bands I and II) in the near-IR region, both of which were systematically shifted depending on the size of their central metal. In the MCD spectra, a relatively intense Faraday A term and a significantly weak Faraday B term have been observed corresponding to bands II and I, respectively. The spectral features were successfully interpreted using a simple MO model by considering the relevant interactions of Gouterman's four orbitals of the constituent chromophores. The model succeeded in assigning the MCD spectra of the related compounds, the oxidized and reduced forms of the dimer ([M(Nc)(OEP)]+ and [M(Nc)(OEP)]-), and neutral forms of the triple-decker compounds (M2(Nc)(OEP)2, M = Nd, Eu). DFT calculations of the dimers supported the validity of this model.     

位移约束集成化处理的连续体结构拓扑优化

为解决多工况下多位移约束的连续体结构拓扑优化问题,引入了K-S函数对位移约束进行集成化处理.在建立优化模型时,基于莫尔定理按ICM方法导出约束点位移与设计变量之间的近似显函数关系,然后采用Lagrange乘子法进行求解.给出三个算例对该方法进行验证,并与ESO法、BESO法、MD法以及均匀化方法的结果进行比较.结果表明:该方法计算效率较高,并且能够计算出更合理的结构拓扑.     

YbB6的能带结构和光电导率谱的解析

用密度泛函（GGA＋U）方法研究YbB6晶体的电子结构。采用FLAPW方法进行计算,获得了比较精确的能带结构信息。分析了YbB6能带结构的特征与Yb-B6簇间成键情况的联系。在此基础上计算YbB6的反射率、介电函数、光电导率和能量损失函数等光学常数,结果与实验值符合比较好。对其光电导率（实部）和能量损失函数谱进行详细分析,对谱峰作出指认,阐明了各谱峰与能带间电子跃迁的联系,证实了前人对谱峰所作经验指认的合理部分,补充和纠正了前人经验指认的不足和不准确之处。     

稀土-沸石-TiO2三元体系光催化材料的性能研究

以钛酸丁酯、稀土硝酸盐、斜发沸石为主要原料,用溶胶-凝胶法制备了稀土-沸石-TiO2三元体系的光催化剂.使用IR,TG-DSC,XRD,SEM等手段对样品进行了表征; 以甲基橙为目标物,太阳光为光源,用光解率对光催化剂性能进行了评价.实验表明,随着沸石负载TiO2量的增加,光催化剂的3 h光解率也逐渐提高; 反应体系的温度越高,光解率越大; 当溶液pH约等于5时,光解率达到最大.     

Catalytic epoxidation of alkenes over supported manganese oxide with hydrogen peroxide: effect of supports and manganese loading

Manganese oxides supported on γ-Al₂O₃, amorphous SiO₂, MCM-41, and TiO₂ prepared by an impregnation method were used as heterogeneous catalysts for epoxidation of alkenes with 30 % H₂O₂ in the presence of NaHCO₃ aqueous solution. The effect of support and manganese loading on their activity was studied. The 1.3-MnO _x /γ-Al₂O₃ exhibited superior epoxidazing activity of styrene, compared with other supported MnO _x . Hydrogen temperature-programmed reduction, UV–vis and ESR analyses suggested that Mn²⁺ (catalytic activity species) dominated in 1.3 % MnO _x /γ-Al₂O₃ due to a strong interaction between MnO _x and γ-Al₂O₃. Recycling studies showed the catalyst was a heterogeneous one and retained its activity after recycling four times.     

液体中激光等离子体冲击波波前传播特性研究及测试

将空气中球对称冲击波衰减波前传播公式推广到非完全中心对称情况，根据对光学阴影法对激光等离子体冲击波波前测试数据的计算分析，提出液体中点源激光等离子体冲击波旋转椭球面波前传播公式.并且用声学方法对水中和酒精中的激光等离子体冲击波波前进行实验测试，结果表明测试结果与计算公式相吻合. 关键词： 激光 等离子体冲击波 旋转椭球面     

Asymmetric Synthesis of Contact Sex Pheromone of Tetropium fuscum and Its Enantiomer

Tetropium fuscum is a harmful forest pest and attacks spruces. The contact sex pheromone of this pest, (S)-11-methyl-heptacosane, and its enantiomer were synthesized via Evans’ chiral auxiliaries. The key steps of this approach included acylation of carboxylic acid, diastereoselective methylation of oxazolidinone amide, and Wittig coupling of the aldehyde with chiral phosphonium salt. The synthetic pheromones would have potential utility in the control of this pest.