Effect of the topology on the antibacterial activity of cationic polythioether synthesized by all-click chemistry

Cationic compounds often serve as antibacterial materials for a wide range of applications. However, the relationship of topology−antibacterial activity has been rarely revealed. Herein, three cationic polythioethers (CPTEs) with hyperbranched topologies are well designed and facilely synthesized via an all-click chemistry strategy (including thiol-ene and epoxy-amine additions). These as-prepared CPTEs were found to exhibited outstanding antibacterial activity against Escherichia coli and Staphylococcus aureus with minimum inhibitory concentrations against E. coli of 7.3, 14.6, and 14.6 μg ml⁻¹, and against S. aureus of 14.6, 29.2, and 29.2 μg ml⁻¹, respectively. The antibacterial activity is coincident with their degree of branching (DB, their DB values of 0.81, 0.48, and 0.27), which is mainly attributed to the inherent three-dimensional structure. The present strategy reveals the relationship of polymer topology and antibacterial activity, providing a novel possibility for designing and/or synthesis of high-efficiency antibacterial agents.     

Cobalt(II)-Catalyzed [4+2] Annulation of Picolinamides with Alkynes via C−H Bond Activation

A cobalt(II)-catalyzed [4+2] annulation of picolinamides with alkynes via C−H bond activation has been developed. The operationally simple annulation reaction allows for the synthesis of acyl-substituted 1H-benzoquinoline bearing multiple aromatic rings (up to 96 % yield) without co-oxidant or other oxidation factors under mild conditions. Several control experiments were carried out. This practical [4+2] annulation provides an efficient route to access highly functionalized compounds.     

Interfacial Engineering in PtNiCo/NiCoS Nanowires for Enhanced Electrocatalysis and Electroanalysis

Searching for new anti-poisoning Pt-based catalysts with enhanced activity for alcohol oxidation is the key in direct alcohol fuel cells (DAFCs). However, in the traditional strategy for designing bimetallic or multimetallic alloy is still difficult to achieve a satisfactory heterogeneous electrocatalyst because the activity often depends on only the surface atoms. Herein, we fabricate the multicomponent active sites by creating a sulfide structure on 1D PtNiCo trimetallic nanowires (NWs), to give a PtNiCo/NiCoS interface NWs (IFNWs). Owing to the presence of sulfide interfaces, the PtNiCo/NiCoS IFNWs enable an impressive methanol/ethanol oxidation reaction (MOR/EOR) performance and excellent anti-CO poisoning tolerance. They have the MOR and EOR mass activities of 2.25 Amg^-1_Pt and 1.62 Amg^-1_Pt, around 1.26, 3.21 and 1.46, 2.96 times higher than those of PtNiCo NWs and commercial Pt/C, respectively. CO-stripping and XPS measurements further demonstrate that the new interfacial structure and optimal bonding of Pt−CO can result in accelerating the removal of surface adsorbed carbonaceous intermediates. Moreover, such a unique structure has also demonstrated a much-improved ability for the electrochemical detection of some important molecules (H₂O₂ and NH₂NH₂).     

First-Principles Investigation of β-FeOOH for Hydrogen Evolution: Identifying Reactive Sites and Boosting Surface Reactions

Akaganeite (β-FeOOH) is a widely investigated candidate for photo(electro)catalysis, such as water splitting. Nevertheless, insights into understanding the surface reaction between water and β-FeOOH, in particular, the hydrogen evolution reaction (HER), are still insufficient. Herein, a set of first-principles calculations on pristine β-FeOOH and halogen-substituted β-FeOOH are applied to evaluate the HER performance through the computational hydrogen electrode model. The results show that the HER on β-FeOOH tends to occur at Fe sites on the (010) surface, and palladium and nickel are found to serve as excellent co-catalysts to boost the HER process, due to the remarkably reduced free energy change of hydrogen adsorption upon loading on the surface of β-FeOOH, demonstrating great potential for efficient water splitting.     

Hierarchical Hollow-Nanocube Ni−Co Skeleton@MoO3/MoS2 Hybrids for Improved-Performance Lithium-Ion Batteries

Improving the performance of anode materials for lithium-ion batteries (LIBs) is a hotly debated topic. Herein, hollow Ni−Co skeleton@MoS₂/MoO₃ nanocubes (NCM-NCs), with an average size of about 193 nm, have been synthesized through a facile hydrothermal reaction. Specifically, MoO₃/MoS₂ composites are grown on Ni−Co skeletons derived from nickel–cobalt Prussian blue analogue nanocubes (Ni−Co PBAs). The Ni−Co PBAs were synthesized through a precipitation method and utilized as self-templates that provided a larger specific surface area for the adhesion of MoO₃/MoS₂ composites. According to Raman spectroscopy results, as-obtained defect-rich MoS₂ is confirmed to be a metallic 1T-phase MoS₂. Furthermore, the average particle size of Ni−Co PBAs (≈43 nm) is only about one-tenth of the previously reported particle size (≈400 nm). If assessed as anodes of LIBs, the hollow NCM-NC hybrids deliver an excellent rate performance and superior cycling performance (with an initial discharge capacity of 1526.3 mAh g⁻¹ and up to 1720.6 mAh g⁻¹ after 317 cycles under a current density of 0.2 A g⁻¹). Meanwhile, ultralong cycling life is retained, even at high current densities (776.6 mAh g⁻¹ at 2 A g⁻¹ after 700 cycles and 584.8 mAh g⁻¹ at 5 A g⁻¹ after 800 cycles). Moreover, at a rate of 1 A g⁻¹, the average specific capacity is maintained at 661 mAh g⁻¹. Thus, the hierarchical hollow NCM-NC hybrids with excellent electrochemical performance are a promising anode material for LIBs.     

Hierarchical Mn3O4 Anchored on 3D Graphene Aerogels via C−O−Mn Linkage with Superior Electrochemical Performance for Flexible Asymmetric Supercapacitor

Flexible asymmetric supercapacitors are more appealing in flexible electronics because of high power density, wide cell voltage, and higher energy density than symmetric supercapacitors in aqueous electrolyte. In virtues of excellent conductivity, rich porous structure and interconnected honeycomb structure, three dimensional graphene aerogels show great potential as electrode in asymmetric supercapacitors. However, graphene aerogels are rarely used in flexible asymmetric supercapacitors because of easily re-stacking of graphene sheets, resulting in low electrochemical activity. Herein, flower-like hierarchical Mn₃O₄ and carbon nanohorns are incorporated into three dimensional graphene aerogels to restrain the stack of graphene sheets, and are applied as the positive and negative electrode for asymmetric supercapacitors devices, respectively. Besides, a strong chemical coupling between Mn₃O₄ and graphene via the C-O-Mn linkage is constructed and can provide a good electron-transport pathway during cycles. Consequently, the asymmetric supercapacitor device shows high rate cycle stability (87.8 % after 5000 cycles) and achieves a high energy density of 17.4 μWh cm⁻² with power density of 14.1 mW cm⁻² (156.7 mW cm⁻³) at 1.4 V.     

Metal-Free,Visible-Light-Induced Selective C−C Bond Cleavage of Cycloalkanones with Molecular Oxygen

A metal-free, visible-light-induced oxidative C−C bond cleavage of cycloketones with molecular oxygen is described. Cooperative Brønsted-acid catalysis and photocatalysis enabled selective C−C bond cleavage of cycloketones to generate an array of γ-, δ- and ϵ-keto esters under very mild conditions. Mechanistic studies indicate that singlet molecular oxygen (¹O₂) is responsible for this transformation.     

Differences of thermal decomposition behaviors and combustion properties between CL-20-based propellants and HMX-based solid propellants

Journal of Thermal Analysis and Calorimetry - Differences of thermal decomposition characteristics and combustion properties between CL-20-based propellants and HMX-based propellants were...