TiO2 sol-gel derived amperometric biosensor for H2O2 on the electropolymerized phenazine methosulfate modified electrode

A novel hydrogen peroxide biosensor was developed based on the immobilization of horseradish peroxidase (HRP) in a TiO(2) sol-gel matrix on an electropolymerized phenazine methosulfate (PMS) modified electrode surface. Such membranes are of interest due to their high surface area, biological compatibility, and ease of fabrication. HRP entrapped in the TiO(2) matix was stable and retained its activity to a large extent. Cyclic voltammetry and amperometric measurements were employed to demonstrate the feasibility of electron transfer between immobilized HRP and the glassy carbon electrode via electropolymerized PMS. The influence of various experimental parameters such as operating potential, pH, temperature, and stability was investigated for optimum analytical performance. The biosensor provided a wide linear calibration range from 4.0x10(-6) M to 1.0x10(-3) M, with a detection limit of 8.0x10(-7) M at a signal-to-noise ratio of 3. The sensor retained 80% of its original activity after two months of operation.     

Synthesis,crystal structure and luminescent property of a novel H<Subscript>2</Subscript>O-bridged cobalt(II) polymer with one-dimensional chain structure

The coordination compound [Co(C₁₀H₇COO)₂(H₂O)₃]_2n · 4nH₂O was prepared by the reaction of 1-naphthoic acid and cobalt(II) acetate tetrahydrate in basic solution, and was fully characterized by X-ray diffraction, element analysis, FTIR, TG-DTA and luminescent spectra. In the crystal the six-coordinated Co(II) centers are linked into one-dimensional zigzag chains by water molecules, which are further assembled into a two-dimensional network through weak inter-chain C–H···π interactions. The solid complex exhibits favorable fluorescent properties similar to those of free ligand at room temperature, which can be assigned to the intraligand electronic transfer.     

Zeolite NaY-mediated oxidation of dyes with H2O2: unique heterogeneous non-transition metal center cleavage of H2O2 under visible light irradiation

This study investigated the visible-light catalysis mediated by zeolite NaY on the oxidation of dyes with H₂O₂. The results demonstrated that zeolite NaY acts as a sink for the electron from the photo-excited dye in the heterogeneous catalysis. Furthermore, the electron can effectively activate H₂O₂ to produce ^·OH radical that is a powerful oxidant for the oxidation of dye at room temperature. The effects of the framework topology, Si/Al ratio, and exchangeable cation of the zeolite on the oxidation of various dyes were also shown.     

Remote substituent effects on bond dissociation energies of para-substituted aromatic silanes

UB3LYP/6-31G(d) and ROMP2/6-311++G(d,2p) methods were used to calculate the Si-X bond dissociation energies (BDEs) of a number of para-substituted aromatic silanes (4-Y-C(6)H(4)-SiH(2)X, where X = H, F, Cl, or Li). It was found that the substituent effect on the Si-H BDE of 4-Y-C(6)H(4)-SiH(3) was small, as the slope (rho(+)()) of the BDE- regression was only 0.09 kJ/mol. In comparison, the substituent effect on the Si-F BDE of 4-Y-C(6)H(4)-SiH(2)F was much stronger, whose rho(+ )()value was -2.34 kJ/mol. The substituent effect on the Si-Cl BDE of 4-Y-C(6)H(4)-SiH(2)Cl was also found to be strong with a rho(+)() value of -1.70 kJ/mol. However, the substituent effect on the Si-Li BDE of 4-Y-C(6)H(4)-SiH(2)Li was found to have a large and positive slope (+9.12 kJ/mol) against. The origin of the above remarkably different substituent effects on the Si-X BDEs was found to be associated with the ability of the substituent to stabilize or destabilize the starting material (4-Y-C(6)H(4)-SiH(2)X) as well as the product (4-Y-C(6)H(4)-SiH(2)* radical) of the homolysis. Therefore, the direction and magnitude of the effects of Y-substituents on the Z-X BDEs in compounds such as 4-YC(6)H(4)Z-X should have some important dependence on the polarity of the Z-X bond undergoing homolysis. This conclusion was in agreement with that from earlier studies (for example, J. Am. Chem. Soc. 1991, 113, 9363). However, it indicated that the proposal from a recent work (J. Am. Chem. Soc. 2001, 123, 5518) was unfortunately not justified.     

Theoretical studies on vibrational spectra of some halides of Group IIB elements

The vibrational spectra of Group IIB elements halides MX2 and their dimers M2X4 (M=Zn(II), Cd(II) and Hg(II); X=F, Cl, Br and I) have been systematically investigated by ab initio RHF and B3LYP methods with LanL2MB, LanL2DZ and SDD basis sets. The optimized geometries, calculated vibrational frequencies are evaluated via comparison with the experimental data. The vibrational frequencies, calculated by these methods with different basis sets, are compared to each other too. The best results can be obtained by RHF/SDD method, with this method, the deviations for MX2 and Hg2X4 are <7%. Some vibrational frequencies of M2X4 that have not been experimentally reported are also predicted.     

A new strategy for the construction of the imidazo[1,5-a]quinoxalin-4-one ring system and its application to the efficient synthesis of BMS-238497, a novel and potent Lck inhibitor

A new efficient strategy was developed for the construction of the imidazo[1,5-a]quinoxalin-4-one ring system. The new method involves condensation of o-nitroaniline with glyoxylate in methanol followed by treatment of the resulting alpha-(o-nitroanilino)-alpha-methoxy acetate with tosylmethyl isocyanide (TosMIC) reagent to give 1-(o-nitrophenyl)imidazole-5-carboxylate. Reductive cyclization of the nitro imidazole carboxylate afforded imidazo[1,5-a]quinoxalin-4-one in three steps and 60% overall yield. The new method was successfully applied to the synthesis of BMS-238497, a novel and potent Lck inhibitor.     

激光诱导击穿光谱(LIBS)法微损快速检测党参中Pb

中药材重金属元素快速检测对污染监控及人们健康具有重要意义。激光诱导击穿光谱技术(Laser Induced Breakdown Spectroscopy, LIBS)属于一种快速检测方法,研磨压片等预处理方法相对样品消解已有所简化,但破坏了样品的物理性质,且不能满足中药材大宗品种、大批量检测需求。若进一步简化样品预处理,将更加凸显LIBS快速检测的优势。本文建立了激光诱导击穿光谱技术(LIBS)快速微损检测中药材样品重金属元素定标方法。线性相关系数R2为0.7764,建立的微损定标曲线线性可用于切片党参LIBS快速检测,对待测党参切片样品检测平均相对误差为3.74%,与电感耦合等离子体质谱法(ICP-MS)对比,相关系数R2为0.7957,验证了LIBS技术微损检测的可行性。制备的党参参考定标样品可多次重复用于待测样定标和仪器标定等。实验对待测党参样品仅进行切片处理,避免了研磨、压片等预处理,更加充分地体现LIBS快速检测的优势,为LIBS技术应用于中药材重金属元素快检等领域提供了一种新方法。     

X射线荧光光谱(XRF)法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量

建立了X射线荧光光谱法测定绿泥石中镁、铝、硅、磷、钾、钙、钛、铁元素含量的快速分析方法。以标准物质及标准物质与基准试剂氧化镁、氧化钙人工混合配制标样的方法建立标准工作曲线,重点讨论了熔剂和脱模剂的选取。最佳熔样条件：采用8.0g四硼酸锂和偏硼酸锂混合熔剂(质量比67: 33)+0.8g样品并添加溴化锂作为脱模剂,熔样温度1100℃,熔样时间10min。该方法相对标准偏差(n=12)均小于5.57%,绿泥石样品测定结果与化学法一致,硅酸盐标准物质测定结果均满足不确定度要求。     

Speckle characteristics of simulated deep Fresnel region under shadowing effect

After the three-dimensional self-affine fractal random surface simulation, we use the optical scattering theory to calculate the deep Fresnel region speckle(DFRS) under consideration of the more strict shadowing effect. The evolution of DFRS with the scattering distance and the intensity probability distribution are studied. It is found that the morphology of the scatterer has an antisymmetric relationship with the intensity distribution of DFRS, and the effect of micro-lenses on the scattering surface causes the intensity probability distribution of DFRS to deviate from the Gaussian speckle in the high light intensity area.