Influence of cesium on the stability of a GaAs photocathode

The stability of a reflection-mode GaAs photocathode has been investigated by monitoring the photocurrent and the spectral response at room temperature.We observe the photocurrent of the cathode decaying with time in the vacuum system under the action of Cs current,and find that the Cs atoms residing in the vacuum system are helpful in prolonging the life of the cathode.We examine the evolution and analyse the influence of the barrier on the spectral response of the cathode.Our results support the double dipolar model for the explanation of the negative electron affinity effect.     

Effect of annealing on structural and optical properties of lead tungstate microcrystals

Shuttle-like lead tungstate (PbWO₄) microcrystals are synthesized at room temperature using the precipitation method with the cetyltrimethyl ammonium bromide. Results from both the X-ray diffraction and the scanning electron microscopy show that the lattice distortions of the PbWO₄ microcrystals are reduced significantly when the annealing temperature is increased to 873 K. The result from the ultraviolet-visible diffuse reflectance spectroscopy shows that the exciton absorption appears in the sample annealed at 673 K. The self-trapped exciton luminescence due to the Jahn-Teller effect is also observed in the blue band. The interstitial oxygen ions in the WO₄^2- groups are mainly resposible for the enhancement effect of the green luminescence of the annealed samples. The above results are supported by the spectrum analysis of the as-grown and the post-annealed samples using the X-ray photoelectron spectroscopy.     

Growth and properties of wide spectral white light emitting diodes

Wide spectral white light emitting diodes have been designed and grown on a sapphire substrate by using a metal-organic chemical vapor deposition system. Three quantum wells with blue-light-emitting, green-light-emitting and red-light-emitting structures were grown according to the design. The surface morphology of the film was observed by using atomic force microscopy. The films were characterized by their photoluminescence measurements. X-ray diffraction θ/2θ scan spectroscopy was carried out on the multi-quantum wells. The secondary fringes of the symmetric ω/2θ X-ray diffraction scan peaks indicate that the thicknesses and the alloy compositions of the individual quantum wells are repeatable throughout the active region. The room temperature photoluminescence spectra of the structures indicate that the white light emission of the multi-quantum wells is obtained. The light spectrum covers 400-700 nm, which is almost the whole visible light spectrum.     

铒离子注入碳化硅的射程和退火行为研究

用300—500 keV能量的铒(Er)离子注入碳化硅(6H-SiC)晶体中,利用卢瑟福背散射技术研究了剂量为5×10¹⁵ cm^-2 的Er离子注入6H-SiC晶体的平均投影射程R_p和射程离散ΔR_p,将测出的实验值和TRIM软件得到的理论模拟值进行了比较,发现R_p的实验值与理论值符合较好,ΔR_p的实验值和理论值差别大一些 关键词： 离子注入 投影射程和射程离散 退火行为 卢瑟福背散射技术     

有限球中14MeV中子点源问题的数值模拟

点源问题的物理实验与数值计算是研究反应堆防护和辐射效应,考查中子参数和计算方法的重要手段。本工作解决了有限元节点上的加源问题,并对几个典型的14MeV中子点源问题的物理实验,用双向间断有限元法进行了数值模拟,并和其它方法的计算结果及物理实验的测量结果进行了比较,取得了较为满意的结果。     

(Nd_(1-x)Er_x)_2Co_(15.5)V_(1.5)的结构转变与磁性

利用电弧熔炼制备了 (Nd1 xErx) 2 Co1 5 5V1 5(x=0— 1 0 )化合物样品 .通过x射线衍射分析和磁性测量研究了Er替代Nd2 Co1 5 5V1 5中的Nd时对化合物结构和磁性的影响 .研究结果表明 ,低Er含量 (x <0 4 ) ,化合物为Th2 Zn1 7型结构 ;高Er含量时 (x >0 5 ) ,化合物转变为Th2 Ni1 7结构 ;Er含量为x =0 4和 0 5时 ,两种结构共存 .两种结构的晶胞参数a ,c和晶胞体积V随着Er含量的增加都呈现递减的趋势 .随着Er含量的增加 ,(Nd1 xErx) 2 Co1 5 5V1 5化合物的居里温度和饱和磁化强度都单调下降 .(Nd1 xErx) 2 Co1 5 5V1 5化合物的室温各向异性由低Er含量时的易锥型转变为高Er含量时的易轴型 .x =0— 0 5的化合物在温度升高时发生自旋重取向转变 ,自旋重取向温度Tsr随Er含量的增加而减小     

光纤光栅选频掺Yb3+双包层光纤激光器

利用相位掩模法 ,在D形内包层掺Yb3 双包层光纤一端直接写制出Bragg光栅 ,用作双包层光纤激光器的输出腔镜 .试验得到了线宽为 0 196nm ,波长为 10 5 8 2nm ,最高输出功率为 5 70mW的稳定激光输出 ,解决了激光器中模式竞争造成的输出不稳定现象 .从速率方程出发 ,对激光器的输出功率与抽运功率、光栅反射率的关系以及最佳光纤长度进行了理论分析 ,结果与实验符合很好     

Surface profile measurement of low-frequency vibrating objects using temporal analysis of fringe pattern

A simple and accurate algorithm (phase scanning method) is proposed for 3D surface contouring and dynamic response determination of a vibrating object. A sinusoidal fringe pattern is projected onto a low-frequency vibrating object by a programmable liquid crystal display projector. The fringe patterns are captured by a high-speed CCD camera with a telecentric gauging lens. Phase values are evaluated point by point using phase scanning method. From the phase values of each point on the object, the contour of the specimen at different instants of vibration can be retrieved. In this paper, a small vibrating coin is used to demonstrate the validity of the method and the experimental results are compared with test results on a stationary coin using four-step phase shifting and fast Fourier transform methods. The technique is especially useful in applications where the vibrating object has a complicated shape.