基于PSpice的半导体激光高频调制系统设计

为了实现高频率的调制激光输出,设计了一种驱动系统由信号放大、电流调制、过流保护和具有慢启动功能的直流偏置电路高度集成的半导体激光高频调制系统。此系统采用了结构简单的直接调制方式,运用线性调频的高频信号去控制半导体激光器发射激光的强度,从而实现高频调制。在运用OrCAD/PSpice对高频调制驱动系统进行模拟仿真的基础上,最终研制出的半导体激光高频调制系统实现了频率为40.02 MHz、直流偏置为493.326 mA、正弦波调制电流峰峰值为850 mA的高频调制输出,调制激光平均功率为300 mW。     

Multiple charge ion beam generation with a 2.45 GHz electron cyclotron resonance ion source

<正>Multiple charge ions (MCIs) are necessary for increasing the output energy of particles in accelerators. In general, MCI beams are largely produced by electron beam ion source (EBIS) [1], laser ion source (LIS) [2], or high-frequency (mostly 5 GHz) electron cyclotron resonance (ECR) ion source [3]. Among these, only ECR ion source can operate in the continuous wave (CW) mode, while EBIS and LIS only support pulses. In addition, ECR ion source with lower frequency (mostly 2.45 GHz) are required primarily for generating single charge state ions, because the corresponding ECR field (875 Gs) is not sufficiently strong for MCI generation [4].     

Generic preparation and entanglement detection of equal superposition states

Quantum superposition is a fundamental principle of quantum mechanics, so it is not surprising that equal superposition states (ESS) serve as powerful resources for quantum information processing. In this work, we propose a quantum circuit that creates an arbitrary dimensional ESS. The circuit construction is efficient as the number of required elementary gates scales polynomially with the number of required qubits. For experimental realization of the method, we use techniques of nuclear magnetic resonance (NMR).We have succeeded in preparing a 9-dimensional ESS on a 4-qubit NMR quantum register. The full tomography indicates that the fidelity of our prepared state with respect to the ideal 9-dimensional ESS is over 96%. We also prove the prepared state is pseudo-entangled by directly measuring an entanglement witness operator. Our result can be useful for the implementation of those quantum algorithms that require an ESS as an input state.     

Ionic liquid-based electrolyte with dual-functional LiDFOB additive toward high-performance LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> batteries

Manganese oxide-based cathodes are one of the most promising lithium-ion battery (LIB) cathode materials due to their cost-effectiveness, high discharge voltage plateau (above 4.0 V vs. Li/Li⁺), superior rate capability, and environmental benignity. However, these batteries using conventional LiPF₆-based electrolytes suffer from Mn dissolution and poor cyclic capability at elevated temperature. In this paper, the ionic liquid (IL)-based electrolytes, consisting of 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfon)imidate (PYR_1,4-TFSI), propylene carbonate (PC), lithium bis(trifluoromethanesulfon)imide (LiTFSI), and lithium oxalyldifluoroborate (LiDFOB) additive, were explored for improving the high temperature performance of the LiMn₂O₄ batteries. It was demonstrated that LiTFSI-ILs/PC electrolyte associated with LiDFOB addition possessed less Mn dissolution and Al corrosion at the elevated temperature in LiMn₂O₄/Li batteries. Cyclic voltammetry and electrochemical impedance spectroscopy implied that this kind of electrolyte also contributed to the formation of a highly stable solid electrolyte interface (SEI), which was in accordance with the polarization measurement and the Li deposition morphology of the symmetric lithium metal cell, thus beneficial for improving the cycling performance of the LiMn₂O₄ batteries at the elevated temperature. Cyclic voltammetry and electrochemical impedance spectroscopy implied that the cells using this kind of electrolyte exhibited better interfacial stability, which was further verified by the polarization measurement and the Li deposition morphology of the symmetric lithium metal cell, thus beneficial for improving the cycling performance of the LiMn₂O₄ batteries at the elevated temperature. These unique characteristics would endow this kind of electrolyte a very promising candidate for the manganese oxide-based batteries.     

Layered lithium-rich oxide nanoparticles: low-temperature synthesis in mixed molten salt and excellent performance as cathode of lithium-ion battery

Layered lithium-rich oxide, 0.5Li₂MnO₃·0.5LiMn_1/3Ni_1/3Co_1/3O₂, is synthesized in a mixed molten salt of KCl and LiCl under 750 °C. Its morphology and structure are characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, and nitrogen adsorption and desorption isotherm, and its performances as cathode of lithium-ion battery are investigated by charge–discharge test and electrochemical impedance spectroscopy, with a comparison of the samples synthesized via solid-state reaction. It is found that the resulting product consists of uniform nanoparticles, 50 nm in average, which possesses a well crystallite layered structure although its synthesis temperature is low and thus exhibits excellent cyclic stability and rate capability. The resulting product delivers an initial discharge capacity of 268 mAh g^?1 at 0.1 C and has a capacity retention of 82% after 100 cycles at 1 C, compared to the 243 mAh g^?1 and 73% for the sample synthesized by solid-state reaction under 900 °C.     

Event-based state estimation for a class of complex networks with time-varying delays: A comparison principle approach

The paper is concerned with the state estimation problem for a class of time-delayed complex networks with event-triggering communication protocol. A novel event generator function, which is dependent not only on the measurement output but also on a predefined positive constant, is proposed with hope to reduce the communication burden. A new concept of exponentially ultimate boundedness is provided to quantify the estimation performance. By means of the comparison principle, some sufficient conditions are obtained to guarantee that the estimation error is exponentially ultimately bounded, and then the estimator gains are obtained in terms of the solution of certain matrix inequalities. Furthermore, a rigorous proof is proposed to show that the designed triggering condition is free of the Zeno behavior. Finally, a numerical example is given to illustrate the effectiveness of the proposed event-based estimator.     

Research on taper zone coupling from single-core fiber to annular-core hollow beam fiber

Optical Review - We designed and manufactured a novel annular-core hollow beam fiber which could directly yield ring light with a central dark spot inside the beam employing MCVD technique and a...     

近距离激光外差探测光学极限位移分辨率

通过统计理论和维纳-辛钦定理推导出激光外差探测系统光电流的功率谱函数,分析了光电流谱线分布与激光光源线宽、中频信号频率以及信号光相对本振光传输延迟时间的关系,修正了相关文献中光电流功率谱的理论公式.根据信号与噪声理论建立了激光线宽引起的相位噪声的一维概率分布模型,并据此得到了基于激光波长、探测距离以及激光线宽的极限位移分辨率的数学模型.对光电流的功率谱和外差光学极限位移分辨率进行了相关的数值仿真,结果表明延迟时间与相干时间的关系决定光电流谱线分布的情况.当激光波长为532 nm,激光线宽在1 kHz,探测距离为100 m时,光学极限位移分辨率为0.266 nm,相关文献中的实验数据与理论推导结果相符合.     

精确分布推导的一个基本的方法

寻求统计量的精确分布,在数理统计的理论中是一个重要的问题。然而,在多元统计分析中,往往很不容易得到统计量的精确分布,有些统计量的分布,例如非中心的Wishanrt分布,持续了几十年,还没有获得完满的结果。我国的许宝騄先生早在1939年,就得到了正态总体样本协差阵的特征根的联合分布(参看[1])。据徐钟济先生的回忆,当时R.A.