Image Displaying Method of Ground-Based Millimeter Wave Radiometric Imaging System

The image displaying methods used in a millimeter wave radiometric imaging system have great influence on its imaging quality. In order to obtain high quality millimeter wave radiometric images, intensive studies on the image displaying methods are needed. This paper describes the image displaying method of Ground-based 8mm Millimeter Wave Radiometric Imaging (GMWRI) system and compares two different image displaying methods. The experimental results prove the unequal size element arc displaying method fits GMWRI system better.     

Hydroxyapatite coating on porous silicon substrate obtained by precipitation process

Hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ (HAP) is known as a bioactive and biocompatible material, HAP coatings were used to improve the biocompatible of substrate by many researcher, In this work, HAP thin films on porous silicon (PS) substrates have been prepared by aqueous precipitation method with rapid thermal annealing (RTA) processes. The HAP films had been prepared under the annealing temperature ranging from 300 to 1000 °C. By the measurement of X-ray diffraction (XRD), it was found that for the crystallinity optimization, the heat-treatment at 850–950 °C for 1 h would be favorable. Atomic force microscopy (AFM) and scanning electron microscope (SEM) measurements reveal a dense and smooth surface of the HAP film, and tightly adherence of the coating on porous silicon substrate after sintered. Thus, by this method, porous silicon could be increased its bioactivity and so that could be used in the biomedical area.     

指数二分性与自治奇摄动系统的退化同宿分支

利用指数二分性理论和泛函分析方法，我们研究了自治奇摄动系统的同，异宿轨道的存在性，给出了高维奇摄动系统从退化系统分支出同异宿轨道的Ｍｅｌ－ｎｉｋｏｖ型函数。     

玻色—爱因斯坦凝聚和兰姆位移

扼要地介绍了ＢＥＣ研究的近况和研究方向，同时报道了我们在ＢＥＣ的光散射和兰姆位移方面的研究工作     

二乙胺合三(5-甲基-2-苯并噻唑基)硼烷的晶体结构

标题化合物二乙胺合三（５－甲基－２－苯并噻唑基）硼烷（Ｃ２８Ｈ２９ＢＮ４Ｓ３（Ｍｒ＝５２７．５７）的晶体属于三斜晶系，空间群为Ｐ１，晶胞参数ａ＝０．３９７（８）ｎｍ，ｂ＝１．１７４２（６）ｎｍ，ｃ＝１．３１００（２）ｎｍ，α＝１０４．２９（２）°，β＝９２．９９（３）°，γ＝９８．５８（５）°，Ｖ＝１．３７９０ｎｍ３，Ｚ＝２，Ｄｃ＝１．２７０ｇ／ｃｍ３，μ（ＭｏＫα）＝２．８０４ｃｍ－１．结构的偏离因子Ｒ＝０．０６４８，Ｒｗ＝０．０７３７．结构测定表明，甲基取代基的电子效应导致硼碳键键长的平均化，预示杂环对硼原子的π－电子反馈与胺基氮原子对硼原子的反馈有彼消此长的关系．     

WAXS studies on block copolymers of ethylene and propylene

Wide-angle X-ray scattering from presumed block copolymers of polypropylene (PP) and ethylene-propylene copolymer (EPR), i.e., PP-EPR and PP-EPR-PP, synthesized by sequential polymerization with δ-TiCl₃? Et₂AlCl, was examined and compared with WAXS of mechanical blends and chain-transfer mixtures of PP and EPR with comparable compositions. The peak at 2θ = 20° for both the copolymers and the mixtures was attributed to the γ modification of PP in EPR. A strong variation in the ratio of diffraction intensities I₀₄₀/I₁₁₀ of PP in block copolymers and mixtures was explained in terms of crystallite growth in different directions. Analysis of the patterns and calculation of crystallinity, crystallite size, and lattice parameters led to the conclusion that block structure existed in the prepared copolymers.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007     

Measurement of small-signal and large-signal responses of packaged laser modules at high temperature

In this paper, the pulsed injection method is extended to measure the chip temperature of various packaged laser modules, such as the DFB laser modules, the FP laser modules, and the EML laser modules. An optimal injection condition is obtained by investigating the dependence of the lasing wavelength on the width and period of the injection pulse in a relatively wide temperature range. The small-signal frequency responses and large-signal performances of packaged laser modules at different chip temperature are measured. The adiabatic small-signal modulation characteristics of packaged LD are first extracted. In the large-signal measurement, the effects of chip temperature, bias current and driving signal on the performances of the laser modules are discussed. It has been found that the large-signal performances of the EML modules depend on the different red-shift speeds of the DFB and EAM sections as chip temperature varying, and the optimal characteristics may be achieved at higher temperature.     

Polymerization of cyclopentadiene initiated by methylaluminoxane

The polymerization of cyclopentadiene (CPD) was effectively initiated by methylaluminoxane (MAO) to generate poly(cyclopentadiene) (polyCPD). The effects on the polymerization of some reaction parameters such as the monomer concentration, the initiator concentration, and solvents were investigated. The conversion of CPD was monitored with gas chromatography to investigate the reaction kinetics. The polymerization rate was proportional to the concentrations of MAO in the first order and of the CPD monomer in the second order, and a reasonable cationic polymerization mechanism was suggested on the basis of the kinetic study. PolyCPD obtained at a low temperature could be dissolved in toluene or chloroform, and this indicated lower cross‐coupling during the polymerization reaction. ¹H NMR and IR analysis of the polymer indicated that there were almost equal amounts of 1,2‐enchainment and 1,4‐enchainment in the polymer chain. The measurement of polyCPD showed its unique properties as a potential candidate for stable wrappings or electronic packaging materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 264–272, 2006