Flexural contact in MEMS stiction

Adhesive force between two solid surfaces can lead to stiction failure of the micro-electro-mechanical systems (MEMS) device. The competition between the adhesive force and the beam restoring force determines whether the stiction occurs or not. Previous models assume that the stuck beam deforms either as the arc-shape or the S-shape, which causes significant differences in the measurements of adhesion and disputations among researchers. The contact mechanics model presented in this paper shows that the assumptions of the arc-shape and S-shape on the beam deformation over-simplify the problem; both the arc-shaped deformation and S-shaped deformation significantly deviate from the real ones. The previous theories are shown to be incompatible with the recent experimental results. The model presented in this paper attempts to explain those new experimental results and resolve some disputations on the previous models. The instabilities of jump-in during loading process and jump-off during unloading process are also incorporated in this model.     

Interlayer shear strength of single crystalline graphite

Reported values(0.2 MPa-7.0 GPa) of the interlayer shear strength(ISS) of graphite are very dispersed.The main challenge to obtain a reliable value of the ISS using conventional measuring methods was the unavailability of sufficiently large single crystalline graphite.Here we present a novel experimental method to measure the ISS,and obtain the value as ～0.14 GPa.Our result can serve as an important basis for understanding mechanical behavior of graphite or graphene-based materials.     

Correlated scale-free network with community: modeling and transportation dynamics

Many transport processes on network depend crucially on the underlying network topology. In this paper, we propose a model to generate correlated scale free transportation networks with community structure by considering the mechanisms of dynamical network evolution and rewiring links. With the introduction of congestion effects, we investigate the performance and carrying capacity of this network. The results show that congestion in the uncorrelated network is more serious than the assortative or disassortative ones. Therefore, the correlated network with communities can bear much more traffic flow. In addition, the networks with lager modularity can enhance the transportation efficiently.     

Research on the price game model for four oligarchs with different decision rules and its chaos control

Based on the actual competition in the Chinese property insurance market, the repeated price game model for four oligarchs with different decision rules is built. On the basis of analyzing the stabilities of eight fixed points about the four-dimensional dynamic system, the Nash equilibrium and its local stable region are discussed mainly. Then the complexity of the four-dimensional discrete dynamic system and its evolutionary process are studied. Finally, the delay feedback control method is used to control the chaos. Numerical simulation results have shown that the influence which the change of price adjustment speed has on the movement of dynamic system has a sensitive dependence on the initial conditions, and there is a strong connection between the profit of each oligarch and the price adjustment speed or the control parameters, and the corresponding economic explanation to those phenomena will have important reference values to the realistic problems.     

氘化对KH2PO4晶体微观缺陷影响的正电子湮没研究

采用传统降温法从不同程度氘化(x=0, 0.51, 0.85)的生长溶液中生长氘化KH₂PO₄(KDP) 晶体, 利用正电子湮没技术(正电子寿命谱和多普勒展宽谱)、结合X射线衍射谱(XRD) 结构分析, 对KDP晶体氘化生长的微观缺陷进行了研究, 讨论了氘化程度对晶体内部微观结构特性、缺陷类型和浓度的影响. XRD结果显示晶胞参数a, b值随氘含量的增加而增加, c值无明显变化; 正电子寿命谱结果发现随着氘化浓度的提高, KDP晶体内部中性填隙缺陷以及氧缺陷不断增加, 引起晶体晶格畸变; 氢空位、K空位、杂质替位缺陷不断发生缔合反应形成复合缺陷, 缺陷浓度不断减少; 团簇、微空洞等大尺寸缺陷也在不断发生聚合反应, 缺陷浓度表现为不断减少. 多普勒实验结果表明随着氘化程度的提升, 晶体内部各类缺陷表现为同步变化. 实验结果表明, KDP晶体在低浓度氘化生长(50%以内)下缺陷反应较弱, 而在高浓度氘化(50%以上)下的缺陷反应显著增强.     

非线性约束优化问题的一个修正 Lagrangian 算法

基于一个含有控制参数的修正Lagrangian函数,该文建立了一个求解非线性约束优化问题的修正Lagrangian算法.在一些适当的条件下,证明了控制参数存在一个阀值,当控制参数小于这一阀值时,由这一算法产生的序列解局部收敛于问题的Kuhn-Tucker点,并且建立了解的误差上界.最后给出一些约束优化问题的数值结果.     

全谱拟合法研究聚丙烯腈基碳纤维形成过程中晶态结构演变

通过全谱拟合法对碳纤维制备过程中不同阶段纤维的XRD谱图进行处理,得到不同阶段纤维的微观结构参数,研究了聚丙烯腈(PAN)基碳纤维制备过程中晶态结构的演变.全谱拟合法基于晶体衍射的严格物理理论,拟合目标为整个衍射谱,并不是个别衍射峰,所得结果具有更高的可信度.研究结果表明:PAN原丝中的高分子链沿纤维轴高度取向,表观晶粒尺寸为6.5 nm左右;经过预氧化处理,纤维中的有序结构遭到破坏,表观晶粒尺寸锐减.纤维中逐渐形成梯形结构并沿纤维轴取向,从而形成新的有序结构;经过碳化处理后,环状梯形结构转变为碳的层状结 关键词： 碳纤维 晶体结构 XRD 全谱拟合法     

萘磺酸掺杂对纳米管结构聚苯胺低温电阻率的影响

通过研究用自组装法制备的萘磺酸掺杂的纳米管结构聚苯胺(苯胺与萘磺酸的摩尔比分别为1∶025,1∶05,1∶1,1∶2,1∶3)的电阻率温度依赖关系(测量温区为80—300K),仔细分析聚苯胺的结构形貌特征,提出了变程跳跃隧道穿透混合模型:认为在萘磺酸掺杂的纳米管结构聚苯胺样品中,跳跃和隧穿两种机制同时起作用,载流子沿纳米管传导是变程跳跃过程起主要作用,而载流子在纳米管之间的传导是隧穿过程起主要作用.实验结果表明,不同浓度的萘磺酸掺杂对样品的低温电阻率的影响很大,随着掺杂浓度增加,载流子传导所需克服的能垒C0迅速减小,当掺杂接近饱和时,C0不再减小.实验中还研究了不同形貌对电阻率的影响,结果表明样品中纳米管所占比例的增大有利于载流子传导 关键词： 聚苯胺 纳米管 低温电阻率     

电流型大面积PIN探测器

研制了灵敏区面积为40,50和60mm,耗尽层厚度为200—300μm的电流型大面积薄型PIN半导体探测器,并对其物理性能进行了测量.测试和应用表明,这些探测器性能稳定,漏电流符合使用要求.与市场上的大面积PIN半导体探测器相比,这些探测器主要在几百伏偏压下工作在电流模式,但也可用于计数模式,而目前的商用产品仅适用于计数测量. 关键词： 半导体探测器 大面积 电流型