Probe measurements in a discharge with liquid nonmetallic electrodes in air at atmospheric pressure

Discharges with liquid nonmetallic electrodes of much interest for applications are investigated. It is found that a dc discharge between two streams of tap water in air at atmospheric pressure is stable at a currentof 40≤I≤100 mA. The discharge exists in the diffuse (volume) form with a relatively low current density (∼0.2 A/cm²) and a high (above one kilovolt) voltage drop across the air gap (∼1 cm) between the water electrodes. The current density and voltage depend only slightly on the discharge current. Probe measurements show that three regions can be distinguished in the discharge: two electrode regions (1–2 mm in length) and a discharge column with a constant electric field of ≈0.8 kV/cm (i.e., E/N≈20 Td, because the gas in the discharge is heated up to 1500–2000 K). The average electric field strength near the electrodes is E≈2–3×10³ V/cm (E/N≈60–80 Td). The charged particle density in the column is n ∼ 10¹² cm⁻³. The probe measurements of n agree with the previous microwave absorption measurements. The water vapor concentration in the column is also estimated from probe measurements.     

Calculations of the Pressure of Polymorphic Transformation in Small Alkali-Halide Crystals

The present paper analyzes the properties of structural phase transitions under the extremal conditions of high pressures. In the context of the theory of density functional (TDF), the pressures of the B1–B2 transitions are calculated for small alkali-halide crystals as functions of the crystal size. The size effect of the B1–B2 transition – an increase in the transition pressure with the decreasing crystal grain radius – has been established for all investigated halides except lithium fluoride for which the dependence is reverse.     

Tagging of the Magnetization with the Transition Zones of 360° Rotations Generated by a Tandem of Two Adiabatic DANTE Inversion Sequences

A new technique is presented for generating myocardial tagging using the signal intensity minima of the transition zones between the bands of 0° and 360° rotations, induced by a tandem of two adiabatic delays alternating with nutations for tailored excitation (DANTE) inversion sequences. With this approach, the underlying matrix corresponds to magnetization that has experienced 0° or 360° rotations. The DANTE sequences were implemented from adiabatic parent pulses for insensitivity of the underlying matrix to B₁ inhomogeneity. The performance of the proposed tagging technique is demonstrated theoretically with computer simulations and experimentally on phantom and on the canine heart, using a surface coil for both RF transmission and signal reception. The simulations and the experimental data demonstrated uniform grid contrast and sharp tagging profiles over a twofold variation of the B₁ field magnitude.     

Application of pressure sensitive paint measurement to a low-solidity cascade diffuser of a transonic centrifugal compressor

A pressure sensitive paint (PSP) measurement has been known as a pressure field measurement technique based on the oxygen quenching phenomenon of luminescence of specific luminophores. A PSP measurement was applied for pressure field measurement in a low-solidity circular cascade diffuser of a single-stage transonic centrifugal compressor with 5 in pressure ratio for HFC134a gas. The oxygen concentration was about 500 ppm. Ru (bath-phen) was adsorbed on a silica-gel thinlayer chromatography sheet, and the sheet was pasted onto the side-wall between the cascade vanes. A drastic change in luminescent intensity was recognized during a surge condition. Also the pressure variations based on luminescent intensity agreed well with the pressure fluctuations measured using a semiconductor pressure sensor with high-frequency-response. It was shown that a PSP measurement worked well to investigate the unsteady pressure fields in a circular cascade diffuser of a transonic centrifugal compressor. Moreover, the time response of PSP becomes clear as a problem to be overcome for the present.     

Resummation of the jet broadening in DIS

We calculate the leading and next-to-leading logarithmic resummed distribution for the jet broadening in deep inelastic scattering, as well as the power correction for both the distribution and mean value. A truncation of the answer at NLL accuracy, as is standard, leads to unphysical divergences. We discuss their origin and show how the problem can be resolved. We then examine DIS specific procedures for matching to fixed order calculations and compare our results to the data. One of the tools developed for the comparison is an NLO parton distribution evolution code. When compared to PDF sets from MRST and CTEQ it reveals limited discrepancies in both. Received: 16 October 2001 / Published online: 12 April 2002     

Effect of gamma irradiation on photoconversion characteristics of metal/gallium arsenide barrier structures with textured interface

The effect of ⁶⁰Co gamma irradiation at doses of 10³-2×10⁵ Gy on the photoconversion and dark I-V characteristics of Au/GaAs surface-barrier solar cells (SCs) is studied. The morphology of the interface microrelief is varied to reach the highest photoconversion efficiency. Of the two types of microrelief morphology (dendritic and quasi-grating) obtained by the chemical anisotropic etching of n-(100)GaAs, the latter is more promising, particularly for SCs designed for space application, since the associated SCs offer higher efficiency and radiation resistance.     

On the Determination of the Absolute Intensities of Vibrational-Rotational Lines of XY3 Molecules with C 3v Symmetry

Analytical formulas are derived that describe the dependences of the transition probabilities in vibrational-rotational spectra of XY₃-type molecules with C _3v symmetry on the rotational quantum numbers.     

Spray Freeze-drying – The Process of Choice for Low Water Soluble Drugs?

Most of the novel highly potent drugs, developed on the basis of modern molecular medicine, taking into account cell surface recognition techniques, show poor water solubility. A chemical modification of the drug substance enhancing the solubility often decreases the pharmacological activity. Thus, as an alternative an increase of the solubility can be obtained by the reduction of the size of the drug particles. Unfortunately, it is often difficult to obtain micro or nanosized drug particles by classical or more advanced crystallization using supercritical gases or by milling techniques. In addition, nanosized particles are often not physically stable and need to be stabilized in an appropriate matrix. Thus, it may be of interest to manufacture directly nanosized drug particles stabilized in an inert hydrophilic matrix, i.e. nanostructured and nanocomposite systems. Solid solutions and solid dispersions represent nanostructured and nanocomposite systems. In this context, the use of the vacuum-fluidized-bed technique for the spray-drying of a low water soluble drug cosolubilized with a hydrophilic excipient in a polar organic solvent is discussed. In order to avoid the use of organic solvents, a special spray-freeze-drying technique working at atmospheric pressure is presented. This process is very suitable for temperature and otherwise sensitive drugs such as pharmaproteins.     

Gluon jets from quarkonia

A detailed analysis is made within perturbative QCD of the decays into gluon jets of P-wave and S-wave quarkonia (J^PC = 0⁺⁺, 1⁺⁺, 2⁺⁺, 1^+? and 0^?+, 1^??). For all those states we compute to leading non-trivial order in α_s the conventional fraction f(?, δ) of the jet-like hadronic final states, characterized by the back-to-back cone of half angle δ, in which all but a small fraction ? of the total energy is emitted. To the same order we give also the average values of thrust momenta and spherocity distributions.