关于Rabinowitz-Crandall的一个例子

本文论述常用燃烧室的柴油机燃用纯酒精的技术可行性。以L195型柴油机采用高压喷射、火花助燃进行燃用纯酒精试验为依据,分析其主要性能和指标。从理论上探讨混合气形成、着火、功率、热效率和使用性能的特点与影响因素。     

Local existence of solutions to the Landau–Maxwell system

We study here the Landau–Maxwell system in its classical form. We prove the local existence of weak solution with initial data of unrestricted size. The main tools consist of an approximation method and a regularity result for velocity averages of solutions of some general linear transport equations.     

CO_2 Reforming of CH_4 over Ni/CeO_2-ZrO_2-Al_2O_3 Prepared by Hydrothermal Synthesis Method

The Ni/CeO2-ZrO2-Al2O3 catalyst with different Al2O3 and NiO contents were prepared by hydrothermal synthesis method. The catalytic performance for CO2 reforming of CH4 reaction, the interaction among components and the relation between Ni content and catalyst surface basicity were investigated. Results show that the interaction between NiO and Al2O3 is stronger than that between NiO and CeO2-ZrO2.The addition of Al2O3 can prevent the formation of large metallic Ni ensembles, increase the dispersion of Ni, and improve catalytic activity, but excess Al2O3 causes the catalyst to deactivate easily. The interaction between NiO and CeO2 results in more facile reduction of surface CeO2. The existence of a small amount of metallic Ni can increase the number of basic sites. As metallic Ni may preferentially reside on the strong basic sites, increasing Ni content can weaken the catalyst basicity.     

红外折/衍混合离轴望远系统设计

本文针对空间光学系统轻型特点,设计了一个二元光学折/衍混合红外反射式望远系统。采用了离轴式格里高利(Gregorian)结构形式,消除了望远系统中的中心遮拦问题。用衍射光学元件校正系统象差,使反射面为球面,二元光学表面尺寸比施密特(Schmidt)校正板(位于入瞳处)缩小于3～4倍,光学设计运用OSLO软件,光学系统的通光孔径φ=120mm,焦距f=-1000mm,波长λ=4.3μm,视场2ω=2°×6°(子午×弧矢),分辨率Res=0.05mm,MTF≥0.4(空间频率fre≤10cl/mm).     

端面泵浦掺Yb3+双包层光纤激光器

从双包层光纤激光器的速率方程出发，得到了光纤中泵浦光与激光的功率分布、输出功率与泵浦功率的关系、腔镜反射率及光纤长度对输出功率的影响。研究结果表明：输出激光功率与光纤长度及后腔镜反射率有很强的依赖关系，存在一个输出功率最大的最佳光纤长度。后腔镜反射率越大，输出激光功率越小；当光纤长度较短时，在输出端放置反射镜使泵浦光高反射，可以提高输出功率和效率。通过对端面泵浦掺Yb3+双包层光纤激光器进行理论分析和实验研究，得到输出激光的中心波长为1088.3nm，斜率效率为33.7%，最大输出功率为1.75W。     

Further study of the viscoelastic phase separation of cyanate ester modified with poly(ether imide)

In this study, the viscoelastic phase separation process was studied further by time‐resolved light scattering, differential scanning calorimetry, and scanning electron microscopy in the system of poly(ether imide)‐modified bisphenol‐A dicyanate. It was observed that the evolution time of phase structure and relaxation time of diffusion flow of the bisphenol‐A dicyanate were similar with the phase diagram of curing conversion versus content of PEI. The results suggested that the viscoelastic phase separation was affected by the curing conversion of the system at the onset point of phase separation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 517–523, 2006     

受激布里渊散射相位共轭现象的二维数值模拟

 使用P.H.Hu等人[3，4]提出的计算途径，数值解了A.Flusberg等人[2]提出的零级方程。计算了布里渊池内随位置而变化的斯托克斯光强度、泵浦光强度和保真度，得到了布里渊池内几个位置上的斯托克斯光相位和强度的横向分布，并计算了泵浦光入口处的反射率和保真度。     

气密性碳涂覆光纤筛选强度与电阻关系研究

通过实验分析确立了把光纤电阻作为衡量气密性碳涂覆光纤通过２％应变筛选的过渡标准。要拉制２％应变筛选的碳涂覆光纤，其电阻值应小于３０ｋΩ／ｃｍ。