On-column amperometric detection in capillary electrophoresis with an improved high-voltage electric field decoupler

The analysis of polyamide-6 oligomers and polymer is usually performed with expensive fluorinated alcohols like 2,2,2-trifluoroethanol (TFE) or 1,1,1,3,3,3-hexafluoroisopropanol (HFIP). Formic acid is well known as a mobile phase additive to adjust pH in reversed-phase high-performance liquid chromatography. However, formic acid is seldom used as a modifier to perform gradient elution chromatography on octadecyl-modified silica-based columns. Here we demonstrate the determination of cyclic and linear polyamide-6 oligomers using formic acid as a modifier on an octadecyl-modified silica-based column. This column was shown to be stable for more than 5000 column volumes, even when a mobile phase of 65-95% formic acid in water at a flow of 1 ml/min is applied. With formic acid under the conditions used (65-95% formic acid in water) the oligomers are retained on the column, while the polymer does not precipitate. In comparison, during adsorption and separation with a HFIP gradient, precipitation of the polymer occurs. The implications of the different separation mechanisms, i.e., adsorption vs. precipitation chromatography are discussed. Loadability is shown to be much better with the formic acid system. However, with formic acid as a modifier UV detection below 250 nm is not feasible. The less sensitive evaporative light scattering detector is used to detect the polyamide oligomers in the formic acid phase. In addition it is shown that capillary zone electrophoresis (CZE) with UV-absorbance detection using HFIP is an attractive combination as HFIP is UV-transparent and CZE allows low modifier consumption.     

Self－assembly of Novel Hetero[3]rotaxane, [2]Rotaxanes and [2]Catenane

One linear template 13 and one cyclophane template 15, both incorporating two electron rich 1,4‐dialkoxybenzene units and one diamide unit, have been synthesized. By utilizing donor‐acceptor interaction and/or intermolecular hydrogen bonding assembling principles, one novel hetero[3]rotazane 22·4Cl, possessing one neutral and one tetracationic ring components, has been synthesized from 13, through neutral [2]rotaxane 21 as intermediate. With 15 as template, tetracationic [2]catenane 23·4PF₆ was assembled by using donor‐acceptor interaction, but no neutral [2]rotaxane could be obtained under the typical conditions of hydrogen bonding assembling principle. The interlocked supramolecular compounds have been characterized and their spectral properties are investigated.     

Low-molecular-weight photoresponsive supramulecular hydrogel based on a dicationic azobenzene-bridged pyridinium hydrogelator

Photoresponsive supramolecular hydrogel was fabricated from a small azobenzene-bridged dicationic pyridinium salt in the aqueous solution. The UV-vis light triggered reversible gel-sol transformation of such low-molecular-weight supramolecular hydrogel was systematically investigated through various analytical techniques.     

New Approach to Synthesis of 6,7—Dimethoxyisatin

A new approach to synthesis of 6,7-dimethoxyisatin is reported.2-nitro-3,4-dimethoxy mandelonitrile in glacial acetic acid was treated with the solution of stannous chloride in hydrochloric acid to give 6,7-dimethoxyisatin in a high yield.     

Determination of traces of bismuth by quenching of solid-substrate room-temperature phosphorescence from morin-labeled silicon dioxide nano-particles

Silicon dioxide nano-particles, diameter 50 nm, containing morin (morin–SiO₂) have been synthesized by the sol–gel method. They emit strong and stable room-temperature phosphorescence (SS-RTP) on filter paper as substrate, and bismuth can quench the intensity of the SS-RTP. On this basis a new morin–SiO₂ solid-substrate room-temperature phosphorescence-quenching method has been established for determination of traces of bismuth. Reduction of phosphorescence intensity (I_p) is directly proportional to the concentration of bismuth in the working range 0.16–14.4 ag spot^–1 (sample volume 0.40 L spot^–1, corresponding to the concentration range 0.40–36.0 fg mL^–1). The regression equation of the working curve is I_p=14.86+5.279×[Bi³⁺] (ag spot^–1) (n=6, r=0.9982). The detection limit of this method is 0.026 ag spot^–1 (corresponding to a concentration of 6.5×10^–17 g mL^–1).This sensitive, reproducible and accurate method has been used for successful analysis of real samples.     

Z‐bpy,a New C2‐Symmetric Bipyridine Ligand and Its Application in Enantioselective Copper(I)‐Catalyzed Cyclopropanation of Olefins

A rigid C₂‐symmetric chiral bipyridine ligand Z‐bpy with a triptycene‐like backbone was designed and synthesized from simple chemicals in a scalable route. Using this new ligand, copper(I) catalyzed cyclopropanation of styrenes with commercial ethyl diazoacetate produced various corresponding cyclopropanes in high yields, diastereoselectivity and enantioselectivity up to 97% ee.     

环己烷催化氧化制取顺酐和醋酸的催化剂研究

为研究气态环己烷催化氧化制取顺酐及醋酸的新反应，采取不同的方法制备了系列固体VPO催化剂.借助XRD、FT-IR对催化剂进行了主体晶相确定，用氧化还原滴定方法测定了不同晶相催化剂中钒的平均氧化数.结合催化反应的活性评价，发现催化剂主体晶相、结晶度、活化气氛和催化剂的V4＋/V5＋比均对目标反应的催化活性产生影响，5种催化剂中以(VO)2P2O7晶相催化剂的活性为最高.     

Review of recent UV–Vis and infrared spectroscopy researches on wine detection and discrimination

Wine has become a commodity of significant commercial value, and the demand for high quality wine by consumers has been increasing. Suitable analytical techniques are needed for its quality control. Ultraviolet, Visible, Near-infrared and infrared spectroscopy is by far one of the most important techniques for determining the wine quality, including its components and characterization. This review will overview the available most recent applications of spectroscopic techniques in the past decade for wine quality prediction and discrimination both quantitatively and qualitatively. The fundamental principles of these techniques will be introduced briefly, and some innovative setups/instrumentations will also be illustrated. At last the limitations and prospects of spectroscopic techniques for wine industry will be discussed.     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.