具有六重穿插非中心对称金刚石网络结构的Cd(Ⅱ)和Zn(Ⅱ)的配位高聚物(英)

利用1，4-二-(4-羧基吡啶基)丁烷(L)合成了两个新的三维配位聚合物{(CdL₂)·4H₂O·2ClO₄}_n 1和{(ZnL₂)·4H₂O·2ClO₄}_n 2。单晶X-射线结构分析表明，1和2具有相同的计量式，但其晶体属于不同的空间群(1属于P4n2，2属于P4₂22)。两种配合物中，每个金属离子分别由配体与四个相邻的金属离子连接，从而形成具有六重穿插的金刚石网络结构，其网络中大的空腔被高氯酸根离子和(H₂O)₄分子簇所占据。     

铁羰基络合物制备的一氧化碳加氢催化剂的研究

本文采用Ｆｅ＿３（ＣＯ）＿（１２）制备担载型络合物催化剂。采用程序升温反应技术考察了这类催化剂（ＣＯ＋Ｈ＿２）的反应性能，井使用紫外漫反射光谱和穆斯堡尔谱对催化剂进行了表征。经２５０℃和１５０℃还原的Ｆｅ／γ－Ａｌ＿２Ｏ＿３催化剂不仅活性远远高于４５０℃还原的Ｆｅ／γ－Ａｌ＿２Ｏ＿３，而且前者在反应过程中有乙烯和乙烷生成，后者则只有甲烷生成。经２５０℃还原的Ｆｅ／分子筛催化剂的活性高于４５０℃还原的Ｆｅ／分子筛催化剂，而且前者在反应过程中有乙烯、乙烷和丙烯生成，后者则只有甲烷生成。紫外漫反射谱和穆斯堡尔谱结果表明：较温和条件下活化的催化剂上有金属于属键骨架的存在。     

Synthesis,crystal structures and electrochemical properties of group 6 metal carbonyl anion complexes

A series of [M(CO)₅I]⁻ and [M₂(CO)₁₀I]⁻ anion complexes have been synthesized by the photochemical reaction of PhCH₂N(CH₃)₃I or FcCH₂N(CH₃)₃I (Fc=ferrocenyl) with M(CO)₆ (M = Cr, Mo or W), and characterized by elemental analyses, i.r., ¹H-n.m.r. and ¹³C-n.m.r. spectra in the case of the molybdenum and tungsten complexes. These complexes exhibit considerably different electrochemical behavior, when investigated by cyclic voltammetry. The crystal structures of [PhCH₂N(CH₃)₃][Cr(CO)₅I] and [FcCH₂N(CH₃)₃][W₂(CO)₁₀I] have been determined by X-ray diffraction, indicating that only weak contacts maybe exist between anions and cations by the I...H bond in the former, and there are no direct interactions between anions and cations in the latter.     

Fabrication of hexaphenylsilole nanowires and their morphology-tunable photoluminescence.

Immersion of nanoporous alumina membranes into saturated solutions of hexaphenylsilole with subsequent solvent evaporation affords aligned organic nanowires. The luminescent properties of the hexaphenylsilole nanowires can be manipulated by varying their morphologies, which were controlled by changing the channel sizes of the alumina templates.     

Preparation of Ce-Zr-O solid solution

A single phase solid solution of Ce-Zr-O can be made by using NH₄HCO₃ solution as precipitating agent. The influence of preparation conditions, such as pH, Zr⁴⁺/(CO₃ ^2-+HCO₃ ^-) and Ce³⁺/Zr⁴⁺ ratio on the formation of the solid solution were investigated. The results show that a single phase Ce-Zr-O solid solution can be formed only under a narrow window of preparation conditions, indicating that some compounds are formed in the precipitating process. The compound may contain Ce³⁺, Zr⁴⁺, CO₃ ^2-, HCO^3-, and OH^-. The solid solution so prepared can be described as Ce_0.37Zr_0.63O₂. This revised version was published online in August 2006 with corrections to the Cover Date.     

TiO(2) porous electrodes with hierarchical branched inner channels for charge transport in viscous electrolytes.

Titanium dioxide (TiO(2)) photoelectrodes with micro/nano hierarchical branched inner channels have been prepared by an electrohydrodynamic (EHD) technique and assembled to form dye-sensitized solar cells (DSSCs). Excellent penetration of ionic-liquid electrolytes and enhanced light harvesting in the longer wavelength region are realized within the composite-structure electrode, thus a better fill factor (ff) of 75.3 % and higher conversion efficiency (eta) of 7.1 % are obtained for viscous ionic-liquid electrolytes compared to pure nanostructured films. Hierarchical branched channels in the photoanodes can efficiently improve the transport properties of redox-active species in viscous electrolytes, which is demonstrated by electrical impedance spectroscopy (EIS). The incident monochromatic photon-to-electron conversion efficiency (IPCE) shows that enhanced light scattering in the composite film is of benefit for light harvesting and thus for solar energy conversion efficiency.     

微波辐射下一步合成3-氨基-4-氰基-1-芳基-5,6,7,8-四氢异苯并吡喃

亚环己基马来腈与芳醛在哌啶催化下,经微波辐射一步合成3-氨基-4-氰基-1-芳基-5,6,7,8-四氢异苯并吡喃,反应7～11min,产率57%～94%.