四溴代对苯二甲酸根及二吡啶基丙烷构筑的锌(Ⅱ)及镉(Ⅱ)配位聚合物的合成及晶体结构

在室温和甲醇/水溶液为溶剂的条件下,以四溴代对苯二甲酸(H2TBTA)及1,3-二(4-吡啶基)丙烷(BPP)为配体合成了[Zn(TBTA)(BPP)]n(1)和[Cd(TBTA)(BPP)2(H2O)2]n(2)2个配位聚合物,对其进行了X-射线单晶衍射、元素分析、红外光谱分析和热重等性质表征。结果表明:配合物1为二维(2D)层状网络结构;配合物2为一维(1D)链状结构;H2TBTA配体中的羧基都采取单齿模式与金属离子配位;配合物中的氢键作用对其结构的稳定性起关键作用。     

Bi2Ti2O7薄膜的自组装法制备及表征

以Bi(NO₃)₃·5H₂O和Ti(OC₄H₉)₄为原料,采用自组装单层膜技术,在负载有功能化三氯十八烷基硅烷(octadecyl-trichloro-silane,OTS)的FTO基板上制备了Bi₂Ti₂O₇ 薄膜。基板表面的亲水性测试表明,紫外照射使OTS自组装单层膜表面由疏水转变为亲水,实现功能化。借助X射线衍射(XRD)、X射线能量色散谱(EDS)、扫描电子显微镜(SEM)和原子力显微镜(AFM)分析分别对Bi₂Ti₂O₇薄膜的组成、结构和微观形貌进行了表征。结果表明,沉积溶液浓度为0.02 mol·L^-1时,所得Bi₂Ti₂O₇薄膜均匀致密。560 ℃热处理1 h、厚度为0.4 μm的Bi₂Ti₂O₇薄膜在100 kHz的介电常数为153,介电损耗为0.089。     

尿素法合成高结晶度类水滑石

尿素的高温分解特性被用于控制层状化合物合成过程中的pH值。室温下尿素可与硝酸盐形成均一溶液，当其高温分解时可以保证溶液内部各点的pH值始终一致，因而可获得高结晶度的水滑石样品。利用该法可合成出Mg-Al、Zn-Al及Ni-Al类水滑石，但难以合成出Co-Al，Mn-Al及Co-Cr类水滑石，相信这与不同金属离子发生沉淀时所需的pH值有关。     

光纤生物传感器用于核酸的特异性检测

为了利用光纤传感器实现对细菌核酸分子的特异性和相对快速检测，我们使用直径1mm的石英光纤和635nm激光二极管，利用倏逝波原理制作了光纤生物传感器。光纤经过处理后产生醛基化基团，然后与核酸分子进行共价结合。通过3个实验来验证传感器的特异性和灵敏度。蒌光素溶液直接检测，使用互补模式寡核苷酸分子（25mer)进行核酸杂交模式实验和设计嗜肺军团菌一段特异性探针一 光标记嗜肺军团菌染色体DNA杂交。结果表明：光纤检测荧光素的灵敏度可达0.01mmol/L，而生物芯片扫描仪最低可检测到1nmol/L的荧光素；模式寡 核苷酸杂交表明：光纤传感器可以特异地检出目的核酸分子，灵敏度可达纳克级水平；染色体杂交结果显示在正常检测浓度下，光纤检测军团菌之信噪比达到了6：1，同时具有较好的特异性。检测时间约需要3－4h。我们构建的光纤生物传感器可以用于核酸分子的特异性检测，并且具有较好的灵敏度，对光纤表面修饰、样品处理和杂交过程的优化可望使之应用于实际标本的检测。     

2-(2,5-二羟基苯基)-5-甲基-2,5-二氢吡咯并[3,4]富勒烯的合成和电子光谱的理论研究

利用丙氨酸和2,5-二羟基苯甲醛所形成的亚胺叶立德与C₆₀发生1,3-偶极环加成反应, 合成并分离、纯化制备了一种新的C₆₀吡咯烷衍生物: 2-(2-5-二羟基苯基)-5-甲基-2,5-二氢吡咯并[3,4]富勒烯. 通过¹H NMR, FT-IR, UV-vis和元素分析确定了其结构, 研究了体系的电化学和荧光性质. 采用密度泛函的方法, 在B3LYP/6-31G水平上对分子的几何构型进行了优化, 得到稳定的几何构型; 运用INDO/S方法计算了化合物的电子光谱, 计算结果434.2 nm与实验值432.0 nm基本一致.     

Li2+2xZn1-xSiO4水基溶胶-凝胶法合成及其离子导电性

用水基溶胶凝胶法制备了锂离子导体Li_2+2xZn_1-xSiO₄(0≤x≤0.5)。实验中对干凝胶的热稳定性进行了TG-DTG分析。XRD谱结果表明形成了与Li₃PO₄结构相关的固溶体Li_2+2xZn_1-xSiO₄。TEM结果则显示晶粒尺寸为50nm左右,并应用交流阻抗谱技术进行了样品烧结体的电性能测试。     

咪唑离子液体及其萃取体系的辐射效应研究

离子液体因其低挥发性,高热稳定性及在萃取金属离子方面的优良表现被认为是乏燃料后处理中萃取分离放射性核素的新一代绿色溶剂。但从乏燃料后处理强辐射的应用环境来看,需要首先对离子液体及其萃取体系的辐射效应进行系统研究和评估。本文以两种常见的憎水性咪唑离子液体1-丁基-3-甲基咪唑六氟磷酸盐( )和1-丁基-3-甲基咪唑三氟甲基磺酰亚胺酸盐( )为例,综述了我们在离子液体及其萃取体系的γ辐射效应方面的最新研究进展,内容包括纯离子液体在氮气气氛下的辐射效应,硝酸对离子液体辐射效应的影响,离子液体辐解产物的分离分析及γ辐照对离子液体体系萃取金属离子的影响等。基于以上研究对离子液体用于乏燃料后处理的可行性进行了评估,同时对离子液体及其萃取体系的辐射效应研究进行了展望。     

对羟基苯乙酸铜(Ⅱ)、锌(Ⅱ)配位聚合物的合成、晶体结构及与DNA作用

合成了两种过渡金属配合物[M(HPAA)(phen)2]HPAA.7H2O(M=Zn,1;Cu,2;HPAA-=对羟基苯乙酸根;phen=1,10-邻菲啰啉),并通过元素分析、红外光谱、热重分析对其进行表征,用单晶X-射线衍射方法测定了配合物的晶体结构。结构分析显示,两种配合物属于异质同晶型,不对称单元都是由1个金属离子,2个对羟基苯乙酸根离子,2个邻菲啰啉分子和7个游离的水分子组成的,其中有1个对羟基苯乙酸根离子未参与配位。每个金属离子的配位数为6,处于扭曲的八面体配位环境中。另外,用荧光光谱法研究了两种配合物与DNA之间的相互作用。     

Structural Characterization and Retention Time Prediction for Components of Essential Oil of Meconopsis Integrifolia Flowers

A molecular structural characterization (MSC) method called reduced molecular electronegativity-distance vector (MEDVR) was used to describe the molecular structures of 55 components of meconopsis integrifolia flowers. By use of stepwise multiple regression (SMR) and partial least square (PLS) methods, a model with the correlation coefficient (R1) of 0.987 and the standard deviation (SD1) of 1.377 could be obtained. Then through multiple linear regression (MLR), another model with the correlation coefficient (R2) of 0.989 and standard deviation (SD2) of 1.395 could be constructed. Furthermore, in virtue of variable screening by the stepwise multiple regression technique (SMR), 8 vectors were selected to build up another model with its correlation coefficient (R3) and standard deviation (SD3) of 0.989 and 1.366, respectively. Then all the three models were evaluated by performing cross-validation with the leave-one-out (LOO) procedure, and the correlation coefficients (QCV) were 0.981, 0.976 and 0.979, respectively. The results show that the models constructed could provide estimation stability and favorable predictive ability.     

The application of digital image recognition to the analysis of two-dimensional fingerprints

High-performance liquid chromatography (HPLC) fingerprint has been commonly used in the quality control and assessment of herbal medicines, and two-dimensional (2D) fingerprint obtained by means of HPLC-diode array detector (HPLC/DAD) can provide higher reliability. In this paper, an approach to the analysis of the 2D HPLC/DAD fingerprints, which was based on digital image recognition techniques, was developed for the first time. First, wavelet transform was employed to eliminate noise signal in the 2D fingerprint, and then the 2D fingerprint was converted into grayscale image. Second, several features of the image were calculated, and hierarchical clustering. This approach was applied to the qualitative analysis of the different samples of coptis chinensis, and the clustering result of samples was all highly consistent with the real situation. Based on the densities in grayscale image, three components in standard samples were quantitative analyzed, and the obtained correlation coefficients between concentration and grayscale density were more than 0.999. Our study indicated that the analysis of the 2D HPLC/DAD fingerprint was successful based on the idea and techniques of digital image recognition techniques, and this proposed approach provided a new pathway for the analysis of two-dimensional spectrums.