Development of a new reaction system for the synthesis of highly optically active alpha,gamma-substituted gamma-butyrolactones

A highly useful method for the synthesis of optically active alpha,gamma-substituted gamma-butyrolactones has been developed. The SmI(2)-induced reductive coupling of chiral 2-alkyl acrylates derived from isosorbide with ketones in the presence of (1S)-(-)-2,10-camphorsultam as a proton source give the chiral alpha,gamma-substituted gamma-butyrolactones in good yields and high enantiomeric purities (up to >99% ee for trans and 75% ee for cis). The reaction system has been investigated with various ketones, and it is demonstrated that this system is very effective for trans-alpha,gamma-substituted gamma-butyrolactones. Both the chiral auxiliary and the hindered proton source in this system are necessary for the observed excellent ee values of the products. The absolute configuration of the trans products is assigned on the basis of the X-ray crystal structure.     

Adsorptive stripping measurements of germanium(IV) in the presence of pyrogallol

The adsorptive stripping voltammetric determination of germanium(IV) based on the adsorptive accumulation of the germanium(IV)-pyrogallol complex on a hanging mercury drop electrode is reported. The reduction current of the adsorbed germanium complex is measured by differential-pulse cathodic stripping voltammetry. The peak potential is at -0.42 V vs. Ag AgCl (saturated KCL). The effects of various parameters (ligand concentration, supporting electrolytic composition and concentration, accumulation potential and collection time) on the response are discussed. With controlled accumulation for 3 min, the detection limit is 1.2 x 10(-9) M germanium. The relative standard deviation (at 1.2 x 10(-8) M germanium) is 3.6%. Possible interferences are evaluated. The applicability of the method to the determination of germanium(IV) in ore samples was also successfully carried out.     

Native and stearic acid modified ceria-zirconia supports in normal and reversed-phase HPLC

Porous ceria-zirconia composite with narrow particle size distribution and large specific surface area was synthesized by a sol-gel process. Chromatographic properties of the native supports was investigated in normal phase mode for the separation of test mixtures of basic, neutral and acidic compounds. The new packing material exhibited polar and basic properties, which are suitable for the separation of basic compounds. Lypophilic packing has been obtained by the modification of the ceria-zirconia with stearic acid, which exhibited strong hydrophobicity relative to the native packing. Therefore, the modified ceria-zirconia behaves as a reversed-phase packing material. Different selectivity towards basic compounds was observed on the new packing compared to the native ceria-zirconia and conventional ODS stationary phase.     

Simultaneous determination of neodymium, erbium and holmium in rare earth mixtures with 2-phenyltrifluoroacetone and octylphenol poly(ethyleneglycol) ether by third-derivative spectrophotometry

The complexes of the rare earth metals with 2-phenyltrifluoroacetone in the presence of TX-100 are reported. The characteristic absorbances of neodymium, holmium and erbium complexes can be increased by factors of 8.5, 31 and 15 respectively, compared to those of the cholrides. The third-derivative spectra have been used to eliminate the interference of cerium, and the sensitivities are increased again by factors of 7.4, 5.5 and 6.5. A method for the direct determination of neodymium, erbium and holmium in rare earth mixtures is proposed.     

Etude des copolymeres (ethylene-hexene-1) par resonance magnetique nucleaire du proton et du carbone 13

Ethylene 1-hexene copolymers obtained by catalytic polymerization have been examined by ¹H and ¹³C NMR. Copolymer compositions have been determined by ¹H NMR and i.r. and the sequence distributions for 1-hexene by ¹³C NMR. Variations of the copolymer microstructure have been related to the experimental conditions for copolymerization.     

Self-gelatinizable copolymer immobilized glucose biosensor based on prussian blue modified graphite electrode

A novel poly(vinyl alcohol) grafting 4-vinylpyridine self-gelatinizable copolymer was adapted to immobilize glucose oxidase. The reduction of hydrogen peroxide (H2O2) was detected at a Prussian Blue (PB) modified graphite electrode. A stable and sensitive glucose amperometric biosensor is described. The copolymer is a good biocompatible polymer in which the glucose oxidase retains high activity. Moreover, the copolymer can adhere firmly to the inorganic PB membrane. The sensor showed an apparent Michaelis-Menten constant of 18 +/- 0.2 mM and a maximum current density of 1.14 microA cm-2 mM-1. The linear range is from 5 microM to 4.5 mM glucose and the detection limit is 0.5 microM glucose. The catalytic efficiency of PB for the reduction of H2O2 is higher than that for the oxidation of H2O2. Glucose concentrations in serum samples from healthy persons and diabetic patients were determined using the sensor. The results compared well with those provided by the hospital using a spectroscopy method.     

Synthesis and Conformational Analysis of the Multidrug Resistance-Reversing Agent Hapalosin and Its Non-N-methyl Analog

Hapalosin was initially synthesized by macrolactonization, and a second synthesis was achieved by cycloamidation. In both syntheses, three of the five stereocenters in hapalosin were established by two Brown allylboration reactions. The synthesis of the non-N-Me analog of hapalosin involved chelation-controlled reduction of a gamma-amino-beta-keto ester and cycloamidation. In CDCl(3) at 25 degrees C, synthetic hapalosin exists as a 2.3:1 mixture of conformers, while its non-N-Me analog exists only as a single conformer. (1)H,(1)H-NOESY and computation reveal that the configuration of the amide bond is responsible for the conformations of the two compounds. The major conformer of hapalosin is found to be an s-cis amide, the minor conformer an s-trans amide, and the non-N-Me analog an s-trans amide. Applying distance constraints to protons that exhibit NOESY correlations, computation shows that the major conformer of hapalosin and the non-N-Me analog have very different conformations. By contrast, the minor conformer of hapalosin and the non-N-Me analog have very similar conformations.     

Subsolidus phase relations and crystal structure of compounds in the PrOx-CaO-CuO system

The subsolidus phase relations of the PrO_x-CaO-CuO pseudo-ternary system sintered at 950-1000°C have been investigated by X-ray powder diffraction. In this system, there exist one compound Ca₁₀Pr₄Cu₂₄O₄₁, one Ca₂Pr₂Cu₅O₁₀-based solid solution, seven three-phase regions and two two-phase regions. The crystal structures of Ca₁₀Pr₄Cu₂₄O₄₁ and Ca₂Pr₂Cu₅O₁₀-based solid solution have been determined. Compound Ca₁₀Pr₄Cu₂₄O₄₁ crystallizes in an orthorhombic cell with space group D_2h²⁰−Cccm, Z=4. Its lattice parameters are a=11.278(2) Å, b=12.448(3) Å and c=27.486(8) Å. The crystal structure of Ca₂Pr₂Cu₅O₁₀-based solid solution is an incommensurate phase based on the orthorhombic NaCuO₂ type subcell. The lattice parameters of the subcell of the Ca_2.4Pr_1.6Cu₅O₁₀ are a₀=2.8246(7) Å, b₀=6.3693(5) Å, c₀=10.679(1) Å, and those of the orthorhombic superstructure are with a=5a₀, b=b₀, c=5c₀. The Ca_2.4Pr_1.6Cu₅O₁₀ structure can also be determined by using a monoclinic supercell with space group C_2h⁵−P2₁/c, Z=4, a=5a₀, b=b₀, and β=104.79(1)° or 136.60(1)°, V=5a₀b₀c₀.     

Studies on the inactivation of bovine liver enoyl-CoA hydratase by (methylenecyclopropyl)formyl-CoA: elucidation of the inactivation mechanism and identification of cysteine-114 as the entrapped nucleophile

The inhibitory properties of (methylenecyclopropyl)formyl-CoA (MCPF-CoA), a metabolite derived from a natural amino acid, (methylenecyclopropyl)glycine, against bovine liver enoyl-CoA hydratase (ECH) were characterized. We have previously demonstrated that MCPF-CoA specifically targets ECHs, which catalyze the reversible hydration of alpha,beta-unsaturated enoyl-CoA substrates to the corresponding beta-hydroxyacyl-CoA products. Here, we synthesized (R)- and (S)-diastereomers of MCPF-CoA to examine the stereoselectivity of this inactivation. Both compounds were shown to be competent inhibitors for bovine liver ECH with nearly identical second-order inactivation rate constants (k(inact)/K(I)) and partition ratios (k(cat)/k(inact)), indicating that the inactivation is nonstereospecific with respect to ring cleavage. The inhibitor, upon incubation with bovine liver ECH, labels a tryptic peptide, ALGGGXEL, near the active site of the protein, where X is the amino acid that is covalently modified. Cloning and sequence analysis of bovine liver ECH gene revealed the identity of the amino acid residue entrapped by MCPF-CoA as Cys-114 (mature sequence numbering). On the basis of gHMQC (gradient heteronuclear multiple quantum coherence) analysis with [3-(13)C]-labeled MCPF-CoA, the ring cleavage is most likely induced by the nucleophilic attack at the terminal carbon of the exomethylene group (C(2)'). We propose a plausible inactivation mechanism that involves relief of ring strain and is consistent with examples found in the literature. In addition, these studies provide important clues for future design of more efficient and selective inhibitors to control and/or regulate fatty acid metabolism.     

Electron energy loss studies of room-temperature co adsorption on Cu(100) induced by electron or ion irradiation

A custom-built multi-technique portable spectrometer was used to study the vibrational (and electronic) excitations associated with the “anomalous” CO adsorption recently observed on clean and oxidized Cu(100) surfaces at room temperature. Results from the electron energy loss (and thermal desorption) experiments have provided strong evidence for in-situ CO production induced by low-energy electron or ion irradiation of CO or C₂H₄ on Cu(100). In particular, the C-O vibrational stretch frequency for the room-temperature CO adsorption was found to be red-shifted by 9 meV from its nominal position (259 meV) and could be observed even at temperature as high as 420 K. Several plausible mechanisms involving coadsorbate interactions with CO on metal surfaces have been discussed. A direct interaction model involving partial bonding between CO, adsorbed on an atop site, and a coadsorbed O atom in a four-fold hollow site was found to be adequate in explaining the observed red shift and the apparent stabilization of CO on Cu(100) at room temperature.